diff mbox series

[5.12,088/296] serial: 8250_pci: handle FL_NOIRQ board flag

Message ID 20210531130706.853875433@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

gregkh@linuxfoundation.org May 31, 2021, 1:12 p.m. UTC 
From: Christian Gmeiner <christian.gmeiner@gmail.com>

commit 9808f9be31c68af43f6e531f2c851ebb066513fe upstream.

In commit 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
the way the irq gets allocated was changed. With that change the
handling FL_NOIRQ got lost. Restore the old behaviour.

Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://lore.kernel.org/r/20210527095529.26281-1-christian.gmeiner@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)
diff mbox series

Patch

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3958,21 +3958,26 @@  pciserial_init_ports(struct pci_dev *dev
 	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
 	uart.port.uartclk = board->base_baud * 16;
 
-	if (pci_match_id(pci_use_msi, dev)) {
-		dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
-		pci_set_master(dev);
-		rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (board->flags & FL_NOIRQ) {
+		uart.port.irq = 0;
 	} else {
-		dev_dbg(&dev->dev, "Using legacy interrupts\n");
-		rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
-	}
-	if (rc < 0) {
-		kfree(priv);
-		priv = ERR_PTR(rc);
-		goto err_deinit;
+		if (pci_match_id(pci_use_msi, dev)) {
+			dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
+			pci_set_master(dev);
+			rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
+		} else {
+			dev_dbg(&dev->dev, "Using legacy interrupts\n");
+			rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
+		}
+		if (rc < 0) {
+			kfree(priv);
+			priv = ERR_PTR(rc);
+			goto err_deinit;
+		}
+
+		uart.port.irq = pci_irq_vector(dev, 0);
 	}
 
-	uart.port.irq = pci_irq_vector(dev, 0);
 	uart.port.dev = &dev->dev;
 
 	for (i = 0; i < nr_ports; i++) {