@@ -1,7 +1,8 @@
CFLAGS += -O3 -Wl,-no-as-needed
LDFLAGS += -lrt -lpthread
bins = posix_timers nanosleep inconsistency-check nsleep-lat raw_skew \
- set-timer-lat threadtest mqueue-lat valid-adjtimex
+ set-timer-lat threadtest mqueue-lat valid-adjtimex \
+ alarmtimer-suspend
all: ${bins}
@@ -20,7 +21,8 @@ run_tests: all
# these tests require escalated privledges
# and may modify the system time or trigger
# other behavior like suspend
-run_destructive_tests: all
+run_destructive_tests: run_tests
+ ./alarmtimer-suspend
./valid-adjtimex
clean:
new file mode 100644
@@ -0,0 +1,172 @@
+/* alarmtimer suspend test
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * This test makes sure the alarmtimer & RTC wakeup code is
+ * functioning.
+ *
+ * To build:
+ * $ gcc alarmtimer-suspend.c -o alarmtimer-suspend -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+
+#define NSEC_PER_SEC 1000000000ULL
+#define UNREASONABLE_LAT (NSEC_PER_SEC * 4) /* hopefully we resume in 4secs */
+
+#define SUSPEND_SECS 15
+int alarmcount;
+int alarm_clock_id;
+struct timespec start_time;
+
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+int final_ret = 0;
+
+void sigalarm(int signo)
+{
+ long long delta_ns;
+ struct timespec ts;
+
+ clock_gettime(alarm_clock_id, &ts);
+ alarmcount++;
+
+ delta_ns = timespec_sub(start_time, ts);
+ delta_ns -= NSEC_PER_SEC * SUSPEND_SECS * alarmcount;
+
+ printf("ALARM(%i): %ld:%ld latency: %lld ns ", alarmcount, ts.tv_sec,
+ ts.tv_nsec, delta_ns);
+
+ if (delta_ns > UNREASONABLE_LAT) {
+ printf("[FAIL]\n");
+ final_ret = -1;
+ } else
+ printf("[OK]\n");
+
+}
+
+int main(void)
+{
+ struct timespec ts;
+ timer_t tm1;
+ struct itimerspec its1, its2;
+ struct sigevent se;
+ struct sigaction act;
+ sigset_t sigmask;
+ int signum = SIGRTMAX;
+
+ /* Set up signal handler: */
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+ act.sa_handler = sigalarm;
+ sigaction(signum, &act, NULL);
+
+ /* Set up timer: */
+ memset(&se, 0, sizeof(se));
+ se.sigev_notify = SIGEV_SIGNAL;
+ se.sigev_signo = signum;
+ se.sigev_value.sival_int = 0;
+
+ for (alarm_clock_id = CLOCK_REALTIME_ALARM;
+ alarm_clock_id <= CLOCK_BOOTTIME_ALARM;
+ alarm_clock_id++) {
+
+ alarmcount = 0;
+ timer_create(alarm_clock_id, &se, &tm1);
+
+ clock_gettime(alarm_clock_id, &start_time);
+ printf("Start time (%s): %ld:%ld\n", clockstring(alarm_clock_id),
+ start_time.tv_sec, start_time.tv_nsec);
+ printf("Setting alarm for every %i seconds\n", SUSPEND_SECS);
+ its1.it_value = start_time;
+ its1.it_value.tv_sec += SUSPEND_SECS;
+ its1.it_interval.tv_sec = SUSPEND_SECS;
+ its1.it_interval.tv_nsec = 0;
+
+ timer_settime(tm1, TIMER_ABSTIME, &its1, &its2);
+
+ while (alarmcount < 5)
+ sleep(1); /* First 5 alarms, do nothing */
+
+ printf("Starting suspend loops\n");
+ while (alarmcount < 10) {
+ int ret;
+
+ sleep(1);
+ ret = system("echo mem > /sys/power/state");
+ }
+ timer_delete(tm1);
+ }
+ return final_ret;
+}
+
This adds the alarmtimer-suspend test from the timetests suite, which tests that the alarmtimers wake the system up from suspend shortly after the time they were set to fire. Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> --- tools/testing/selftests/timers/Makefile | 6 +- .../testing/selftests/timers/alarmtimer-suspend.c | 172 +++++++++++++++++++++ 2 files changed, 176 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/timers/alarmtimer-suspend.c