| Message ID | 20210604111005.6804-1-peng.fan@oss.nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: imx8mm: add pgc/blk_ctl nodes | expand |
On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote: > > From: Peng Fan <peng.fan@nxp.com> > > With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes, > because some pgc domain relies on blk-ctl power domain, so > they need to be added together. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > > V1: > Depends on the blk-ctl patchset, > https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210522134249.15322-1-peng.fan@oss.nxp.com/ > > Shawn, > Since the blk-ctl patchset is in good shape and tested, is it ok for > you to pick up? > Thanks > > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128 ++++++++++++++++++++++ > 1 file changed, 128 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > index e7648c3b8390..0e01ff649956 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > @@ -7,6 +7,8 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/power/imx8mm-power.h> > +#include <dt-bindings/reset/imx8mq-reset.h> > #include <dt-bindings/thermal/thermal.h> > > #include "imx8mm-pinfunc.h" > @@ -609,6 +611,109 @@ src: reset-controller@30390000 { > interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; > #reset-cells = <1>; > }; > + > + gpc: gpc@303a0000 { > + compatible = "fsl,imx8mm-gpc"; > + reg = <0x303a0000 0x10000>; > + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + interrupt-controller; > + #interrupt-cells = <3>; > + > + pgc { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pgc_hsiomix: power-domain@0 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>; > + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; > + }; > + > + pgc_pcie: power-domain@1 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_PCIE>; > + power-domains = <&pgc_hsiomix>; > + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>; > + }; > + > + pgc_otg1: power-domain@2 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_OTG1>; > + power-domains = <&pgc_hsiomix>; > + }; > + > + pgc_otg2: power-domain@3 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_OTG2>; > + power-domains = <&pgc_hsiomix>; > + }; > + Any change you could add the references to pgc_otg1 and pgc_otg2 to their respective OTG nodes? Without them, enabling OTG1 or OTG2 can result in a hang unless it was started in U-Boot. > + pgc_gpumix: power-domain@4 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_GPUMIX>; > + clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>, > + <&clk IMX8MM_CLK_GPU_AHB>; > + }; > + > + pgc_gpu: power-domain@5 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_GPU>; > + clocks = <&clk IMX8MM_CLK_GPU_AHB>, > + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, > + <&clk IMX8MM_CLK_GPU2D_ROOT>, > + <&clk IMX8MM_CLK_GPU3D_ROOT>; > + resets = <&src IMX8MQ_RESET_GPU_RESET>; > + power-domains = <&pgc_gpumix>; > + }; > + > + pgc_vpumix: power-domain@6 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_VPUMIX>; > + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>; > + resets = <&src IMX8MQ_RESET_VPU_RESET>; > + }; > + > + pgc_vpu_g1: power-domain@7 { > + #power-domain-cells = <0>; > + power-domains = > + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; > + reg = <IMX8MM_POWER_DOMAIN_VPUG1>; > + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>; > + }; > + > + pgc_vpu_g2: power-domain@8 { > + #power-domain-cells = <0>; > + power-domains = > + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; > + reg = <IMX8MM_POWER_DOMAIN_VPUG2>; > + clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>; > + }; > + > + pgc_vpu_h1: power-domain@9 { > + #power-domain-cells = <0>; > + power-domains = > + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; > + reg = <IMX8MM_POWER_DOMAIN_VPUH1>; > + clocks = <&clk IMX8MM_CLK_VPU_H1_ROOT>; > + }; > + > + pgc_dispmix: power-domain@10 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_DISPMIX>; > + clocks = <&clk IMX8MM_CLK_DISP_ROOT>, > + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, > + <&clk IMX8MM_CLK_DISP_APB_ROOT>; > + }; > + > + pgc_mipi: power-domain@11 { > + #power-domain-cells = <0>; > + reg = <IMX8MM_POWER_DOMAIN_MIPI>; > + power-domains = > + <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>; > + }; > + }; > + }; > }; > > aips2: bus@30400000 { > @@ -960,6 +1065,18 @@ aips4: bus@32c00000 { > #size-cells = <1>; > ranges = <0x32c00000 0x32c00000 0x400000>; > > + dispmix_blk_ctl: blk_ctl@32e28000 { > + compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon"; > + reg = <0x32e28000 0x100>; > + #power-domain-cells = <1>; > + #reset-cells = <1>; > + power-domains = <&pgc_dispmix>, <&pgc_mipi>; > + power-domain-names = "dispmix", "mipi"; > + clocks = <&clk IMX8MM_CLK_DISP_ROOT>, > + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, > + <&clk IMX8MM_CLK_DISP_APB_ROOT>; > + }; > + > usbotg1: usb@32e40000 { > compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; > reg = <0x32e40000 0x200>; > @@ -1029,6 +1146,17 @@ gpmi: nand-controller@33002000{ > status = "disabled"; > }; > > + vpumix_blk_ctl: blk-ctl@38330000 { > + compatible = "fsl,imx8mm-vpumix-blk-ctl", "syscon"; > + reg = <0x38330000 0x100>; > + #power-domain-cells = <1>; > + #reset-cells = <1>; > + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>; > + power-domain-names = "vpumix", "vpu-g1", "vpu-g2", "vpu-h1"; > + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>, > + <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>; > + }; > + > gic: interrupt-controller@38800000 { > compatible = "arm,gic-v3"; > reg = <0x38800000 0x10000>, /* GIC Dist */ > -- > 2.30.0 >
Hi Adam, On Tue, Jun 29, 2021 at 10:36 AM Adam Ford <aford173@gmail.com> wrote: > Any change you could add the references to pgc_otg1 and pgc_otg2 to > their respective OTG nodes? Without them, enabling OTG1 or OTG2 can > result in a hang unless it was started in U-Boot. There is a patch from Lucas doing that: https://patchwork.kernel.org/project/linux-arm-kernel/patch/20200930155006.535712-12-l.stach@pengutronix.de/ Cheers
> Subject: Re: [PATCH] arm64: dts: imx8mm: add pgc/blk_ctl nodes > > On Fri, Jun 4, 2021 at 5:37 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> > wrote: > > > > From: Peng Fan <peng.fan@nxp.com> > > > > With PGC and BLK-CTL landed, we could add pgc and blk-ctl nodes, > > because some pgc domain relies on blk-ctl power domain, so they need > > to be added together. > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > > > V1: > > Depends on the blk-ctl patchset, > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc > > > hwork.kernel.org%2Fproject%2Flinux-arm-kernel%2Fcover%2F202105221342 > 49 > > .15322-1-peng.fan%40oss.nxp.com%2F&data=04%7C01%7Cpeng.fan% > 40nxp.c > > > om%7C388c4bd417ff49d393c708d93b02e9f9%7C686ea1d3bc2b4c6fa92cd99 > c5c3016 > > > 35%7C0%7C0%7C637605705985073021%7CUnknown%7CTWFpbGZsb3d8ey > JWIjoiMC4wLj > > > AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000& > ;sdata= > > > osAlqXkaxQ8qexwmd%2Fh33V0tUpVnT%2Fk7B5kq5vgVRVQ%3D&reser > ved=0 > > > > Shawn, > > Since the blk-ctl patchset is in good shape and tested, is it ok for > > you to pick up? > > Thanks > > > > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 128 > > ++++++++++++++++++++++ > > 1 file changed, 128 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > index e7648c3b8390..0e01ff649956 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > > @@ -7,6 +7,8 @@ > > #include <dt-bindings/gpio/gpio.h> > > #include <dt-bindings/input/input.h> > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/power/imx8mm-power.h> > > +#include <dt-bindings/reset/imx8mq-reset.h> > > #include <dt-bindings/thermal/thermal.h> > > > > #include "imx8mm-pinfunc.h" > > @@ -609,6 +611,109 @@ src: reset-controller@30390000 { > > interrupts = <GIC_SPI 89 > IRQ_TYPE_LEVEL_HIGH>; > > #reset-cells = <1>; > > }; > > + > > + gpc: gpc@303a0000 { > > + compatible = "fsl,imx8mm-gpc"; > > + reg = <0x303a0000 0x10000>; > > + interrupts = <GIC_SPI 87 > IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + > > + pgc { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pgc_hsiomix: > power-domain@0 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_HSIOMIX>; > > + clocks = <&clk > IMX8MM_CLK_USB1_CTRL_ROOT>; > > + }; > > + > > + pgc_pcie: > power-domain@1 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_PCIE>; > > + power-domains > = <&pgc_hsiomix>; > > + clocks = <&clk > IMX8MM_CLK_PCIE1_ROOT>; > > + }; > > + > > + pgc_otg1: > power-domain@2 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_OTG1>; > > + power-domains > = <&pgc_hsiomix>; > > + }; > > + > > + pgc_otg2: > power-domain@3 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_OTG2>; > > + power-domains > = <&pgc_hsiomix>; > > + }; > > + > > Any change you could add the references to pgc_otg1 and pgc_otg2 to their > respective OTG nodes? Without them, enabling OTG1 or OTG2 can result in a > hang unless it was started in U-Boot. Will post v2 to add that, really hope the driver part could be in, then move on. Thanks, Peng. > > > + pgc_gpumix: > power-domain@4 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_GPUMIX>; > > + clocks = <&clk > IMX8MM_CLK_GPU_BUS_ROOT>, > > + > <&clk IMX8MM_CLK_GPU_AHB>; > > + }; > > + > > + pgc_gpu: > power-domain@5 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_GPU>; > > + clocks = <&clk > IMX8MM_CLK_GPU_AHB>, > > + > <&clk IMX8MM_CLK_GPU_BUS_ROOT>, > > + > <&clk IMX8MM_CLK_GPU2D_ROOT>, > > + > <&clk IMX8MM_CLK_GPU3D_ROOT>; > > + resets = <&src > IMX8MQ_RESET_GPU_RESET>; > > + power-domains > = <&pgc_gpumix>; > > + }; > > + > > + pgc_vpumix: > power-domain@6 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_VPUMIX>; > > + clocks = <&clk > IMX8MM_CLK_VPU_DEC_ROOT>; > > + resets = <&src > IMX8MQ_RESET_VPU_RESET>; > > + }; > > + > > + pgc_vpu_g1: > power-domain@7 { > > + > #power-domain-cells = <0>; > > + power-domains > = > > + > <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; > > + reg = > <IMX8MM_POWER_DOMAIN_VPUG1>; > > + clocks = <&clk > IMX8MM_CLK_VPU_G1_ROOT>; > > + }; > > + > > + pgc_vpu_g2: > power-domain@8 { > > + > #power-domain-cells = <0>; > > + power-domains > = > > + > <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; > > + reg = > <IMX8MM_POWER_DOMAIN_VPUG2>; > > + clocks = <&clk > IMX8MM_CLK_VPU_G2_ROOT>; > > + }; > > + > > + pgc_vpu_h1: > power-domain@9 { > > + > #power-domain-cells = <0>; > > + power-domains > = > > + > <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; > > + reg = > <IMX8MM_POWER_DOMAIN_VPUH1>; > > + clocks = <&clk > IMX8MM_CLK_VPU_H1_ROOT>; > > + }; > > + > > + pgc_dispmix: > power-domain@10 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_DISPMIX>; > > + clocks = <&clk > IMX8MM_CLK_DISP_ROOT>, > > + > <&clk IMX8MM_CLK_DISP_AXI_ROOT>, > > + > <&clk IMX8MM_CLK_DISP_APB_ROOT>; > > + }; > > + > > + pgc_mipi: > power-domain@11 { > > + > #power-domain-cells = <0>; > > + reg = > <IMX8MM_POWER_DOMAIN_MIPI>; > > + power-domains > = > > + > <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>; > > + }; > > + }; > > + }; > > }; > > > > aips2: bus@30400000 { > > @@ -960,6 +1065,18 @@ aips4: bus@32c00000 { > > #size-cells = <1>; > > ranges = <0x32c00000 0x32c00000 > 0x400000>; > > > > + dispmix_blk_ctl: blk_ctl@32e28000 { > > + compatible = > "fsl,imx8mm-dispmix-blk-ctl", "syscon"; > > + reg = <0x32e28000 0x100>; > > + #power-domain-cells = <1>; > > + #reset-cells = <1>; > > + power-domains = <&pgc_dispmix>, > <&pgc_mipi>; > > + power-domain-names = "dispmix", > "mipi"; > > + clocks = <&clk > IMX8MM_CLK_DISP_ROOT>, > > + <&clk > IMX8MM_CLK_DISP_AXI_ROOT>, > > + <&clk > IMX8MM_CLK_DISP_APB_ROOT>; > > + }; > > + > > usbotg1: usb@32e40000 { > > compatible = "fsl,imx8mm-usb", > "fsl,imx7d-usb"; > > reg = <0x32e40000 0x200>; @@ > -1029,6 > > +1146,17 @@ gpmi: nand-controller@33002000{ > > status = "disabled"; > > }; > > > > + vpumix_blk_ctl: blk-ctl@38330000 { > > + compatible = "fsl,imx8mm-vpumix-blk-ctl", > "syscon"; > > + reg = <0x38330000 0x100>; > > + #power-domain-cells = <1>; > > + #reset-cells = <1>; > > + power-domains = <&pgc_vpumix>, > <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>; > > + power-domain-names = "vpumix", "vpu-g1", > "vpu-g2", "vpu-h1"; > > + clocks = <&clk > IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>, > > + <&clk > IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>; > > + }; > > + > > gic: interrupt-controller@38800000 { > > compatible = "arm,gic-v3"; > > reg = <0x38800000 0x10000>, /* GIC Dist */ > > -- > > 2.30.0 > >
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index e7648c3b8390..0e01ff649956 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -7,6 +7,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/imx8mm-power.h> +#include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/thermal/thermal.h> #include "imx8mm-pinfunc.h" @@ -609,6 +611,109 @@ src: reset-controller@30390000 { interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mm-gpc"; + reg = <0x303a0000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_hsiomix: power-domain@0 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + }; + + pgc_pcie: power-domain@1 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_PCIE>; + power-domains = <&pgc_hsiomix>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>; + }; + + pgc_otg1: power-domain@2 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_OTG1>; + power-domains = <&pgc_hsiomix>; + }; + + pgc_otg2: power-domain@3 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_OTG2>; + power-domains = <&pgc_hsiomix>; + }; + + pgc_gpumix: power-domain@4 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_GPUMIX>; + clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU_AHB>; + }; + + pgc_gpu: power-domain@5 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_GPU>; + clocks = <&clk IMX8MM_CLK_GPU_AHB>, + <&clk IMX8MM_CLK_GPU_BUS_ROOT>, + <&clk IMX8MM_CLK_GPU2D_ROOT>, + <&clk IMX8MM_CLK_GPU3D_ROOT>; + resets = <&src IMX8MQ_RESET_GPU_RESET>; + power-domains = <&pgc_gpumix>; + }; + + pgc_vpumix: power-domain@6 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_VPUMIX>; + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>; + resets = <&src IMX8MQ_RESET_VPU_RESET>; + }; + + pgc_vpu_g1: power-domain@7 { + #power-domain-cells = <0>; + power-domains = + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; + reg = <IMX8MM_POWER_DOMAIN_VPUG1>; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>; + }; + + pgc_vpu_g2: power-domain@8 { + #power-domain-cells = <0>; + power-domains = + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; + reg = <IMX8MM_POWER_DOMAIN_VPUG2>; + clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>; + }; + + pgc_vpu_h1: power-domain@9 { + #power-domain-cells = <0>; + power-domains = + <&vpumix_blk_ctl IMX8MM_BLK_CTL_PD_VPU_BUS>; + reg = <IMX8MM_POWER_DOMAIN_VPUH1>; + clocks = <&clk IMX8MM_CLK_VPU_H1_ROOT>; + }; + + pgc_dispmix: power-domain@10 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_DISPMIX>; + clocks = <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>; + }; + + pgc_mipi: power-domain@11 { + #power-domain-cells = <0>; + reg = <IMX8MM_POWER_DOMAIN_MIPI>; + power-domains = + <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>; + }; + }; + }; }; aips2: bus@30400000 { @@ -960,6 +1065,18 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + dispmix_blk_ctl: blk_ctl@32e28000 { + compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon"; + reg = <0x32e28000 0x100>; + #power-domain-cells = <1>; + #reset-cells = <1>; + power-domains = <&pgc_dispmix>, <&pgc_mipi>; + power-domain-names = "dispmix", "mipi"; + clocks = <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>; + }; + usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; reg = <0x32e40000 0x200>; @@ -1029,6 +1146,17 @@ gpmi: nand-controller@33002000{ status = "disabled"; }; + vpumix_blk_ctl: blk-ctl@38330000 { + compatible = "fsl,imx8mm-vpumix-blk-ctl", "syscon"; + reg = <0x38330000 0x100>; + #power-domain-cells = <1>; + #reset-cells = <1>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "vpumix", "vpu-g1", "vpu-g2", "vpu-h1"; + clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>, <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, <&clk IMX8MM_CLK_VPU_H1_ROOT>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */