diff mbox series

[next,09/15] ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv

Message ID 20210612011436.10437-10-grygorii.strashko@ti.com
State New
Headers show
Series [next,01/15] ARM: dts: am335x-baltos: switch to new cpsw switch drv | expand

Commit Message

Grygorii Strashko June 12, 2021, 1:14 a.m. UTC 
The dual_mac mode has been preserved the same way between legacy and new
driver, and one port devices works the same as 1 dual_mac port - it's safe
to switch drivers.

So, switch Octavo Systems OSD3358-SM-RED to use new cpsw switch driver.
Those boards have or 2 Ext. port wired and configured in dual_mac mode by
default, or only 1 Ext. port.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am335x-osd3358-sm-red.dts | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 5403e47c07e2..605b2a436edf 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -391,24 +391,27 @@ 
 	clock-frequency = <100000>;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-	slaves = <1>;
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;