deleted file mode 100644
@@ -1,30 +0,0 @@
-/*
- * arch/arm64/include/asm/cputable.h
- *
- * Copyright (C) 2012 ARM Ltd.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __ASM_CPUTABLE_H
-#define __ASM_CPUTABLE_H
-
-struct cpu_info {
- unsigned int cpu_id_val;
- unsigned int cpu_id_mask;
- const char *cpu_name;
- unsigned long (*cpu_setup)(void);
-};
-
-extern struct cpu_info *lookup_processor_type(unsigned int);
-
-#endif
@@ -12,7 +12,7 @@ CFLAGS_REMOVE_insn.o = -pg
CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
-arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \
+arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o \
@@ -24,7 +24,6 @@
#include <linux/kvm_host.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
-#include <asm/cputable.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/vdso_datapage.h>
@@ -71,9 +70,6 @@ int main(void)
BLANK();
DEFINE(PAGE_SZ, PAGE_SIZE);
BLANK();
- DEFINE(CPU_INFO_SZ, sizeof(struct cpu_info));
- DEFINE(CPU_INFO_SETUP, offsetof(struct cpu_info, cpu_setup));
- BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE);
DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE);
deleted file mode 100644
@@ -1,33 +0,0 @@
-/*
- * arch/arm64/kernel/cputable.c
- *
- * Copyright (C) 2012 ARM Ltd.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-
-#include <asm/cputable.h>
-
-extern unsigned long __cpu_setup(void);
-
-struct cpu_info cpu_table[] = {
- {
- .cpu_id_val = 0x000f0000,
- .cpu_id_mask = 0x000f0000,
- .cpu_name = "AArch64 Processor",
- .cpu_setup = __cpu_setup,
- },
- { /* Empty */ },
-};
@@ -245,22 +245,12 @@ ENTRY(stext)
bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
bl set_cpu_boot_mode_flag
mrs x22, midr_el1 // x22=cpuid
- mov x0, x22
- bl lookup_processor_type
- mov x23, x0 // x23=current cpu_table
- /*
- * __error_p may end up out of range for cbz if text areas are
- * aligned up to section sizes.
- */
- cbnz x23, 1f // invalid processor (x23=0)?
- b __error_p
-1:
+
bl __vet_fdt
bl __create_page_tables // x25=TTBR0, x26=TTBR1
/*
- * The following calls CPU specific code in a position independent
- * manner. See arch/arm64/mm/proc.S for details. x23 = base of
- * cpu_info structure selected by lookup_processor_type above.
+ * The following calls CPU setup code, see arch/arm64/mm/proc.S for
+ * details.
* On return, the CPU will be ready for the MMU to be turned on and
* the TCR will have been set.
*/
@@ -268,9 +258,7 @@ ENTRY(stext)
// MMU has been enabled
adrp lr, __enable_mmu // return (PIC) address
add lr, lr, #:lo12:__enable_mmu
- ldr x12, [x23, #CPU_INFO_SETUP]
- add x12, x12, x28 // __virt_to_phys
- br x12 // initialise processor
+ b __cpu_setup // initialise processor
ENDPROC(stext)
/*
@@ -634,15 +622,9 @@ ENTRY(secondary_startup)
* Common entry point for secondary CPUs.
*/
mrs x22, midr_el1 // x22=cpuid
- mov x0, x22
- bl lookup_processor_type
- mov x23, x0 // x23=current cpu_table
- cbz x23, __error_p // invalid processor (x23=0)?
pgtbl x25, x26, x28 // x25=TTBR0, x26=TTBR1
- ldr x12, [x23, #CPU_INFO_SETUP]
- add x12, x12, x28 // __virt_to_phys
- blr x12 // initialise processor
+ bl __cpu_setup // initialise processor
ldr x21, =secondary_data
ldr x27, =__secondary_switched // address to jump to after enabling the MMU
@@ -708,51 +690,3 @@ ENDPROC(__calc_phys_offset)
.align 3
1: .quad .
.quad PAGE_OFFSET
-
-/*
- * Exception handling. Something went wrong and we can't proceed. We ought to
- * tell the user, but since we don't have any guarantee that we're even
- * running on the right architecture, we do virtually nothing.
- */
-__error_p:
-ENDPROC(__error_p)
-
-__error:
-1: nop
- b 1b
-ENDPROC(__error)
-
-/*
- * This function gets the processor ID in w0 and searches the cpu_table[] for
- * a match. It returns a pointer to the struct cpu_info it found. The
- * cpu_table[] must end with an empty (all zeros) structure.
- *
- * This routine can be called via C code and it needs to work with the MMU
- * both disabled and enabled (the offset is calculated automatically).
- */
-ENTRY(lookup_processor_type)
- adr x1, __lookup_processor_type_data
- ldp x2, x3, [x1]
- sub x1, x1, x2 // get offset between VA and PA
- add x3, x3, x1 // convert VA to PA
-1:
- ldp w5, w6, [x3] // load cpu_id_val and cpu_id_mask
- cbz w5, 2f // end of list?
- and w6, w6, w0
- cmp w5, w6
- b.eq 3f
- add x3, x3, #CPU_INFO_SZ
- b 1b
-2:
- mov x3, #0 // unknown processor
-3:
- mov x0, x3
- ret
-ENDPROC(lookup_processor_type)
-
- .align 3
- .type __lookup_processor_type_data, %object
-__lookup_processor_type_data:
- .quad .
- .quad cpu_table
- .size __lookup_processor_type_data, . - __lookup_processor_type_data
@@ -50,7 +50,6 @@
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/elf.h>
-#include <asm/cputable.h>
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
#include <asm/sections.h>
@@ -83,7 +82,6 @@ unsigned int compat_elf_hwcap2 __read_mostly;
DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
-static const char *cpu_name;
phys_addr_t __fdt_pointer __initdata;
/*
@@ -209,22 +207,12 @@ static void __init smp_build_mpidr_hash(void)
static void __init setup_processor(void)
{
- struct cpu_info *cpu_info;
u64 features, block;
u32 cwg;
int cls;
- cpu_info = lookup_processor_type(read_cpuid_id());
- if (!cpu_info) {
- printk("CPU configuration botched (ID %08x), unable to continue.\n",
- read_cpuid_id());
- while (1);
- }
-
- cpu_name = cpu_info->cpu_name;
-
- printk("CPU: %s [%08x] revision %d\n",
- cpu_name, read_cpuid_id(), read_cpuid_id() & 15);
+ printk("CPU: AArch64 Processor [%08x] revision %d\n",
+ read_cpuid_id(), read_cpuid_id() & 15);
sprintf(init_utsname()->machine, ELF_PLATFORM);
elf_hwcap = 0;