| Message ID | 1318342396-26178-2-git-send-email-thomas.abraham@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Tue, Oct 11, 2011 at 07:43:15PM +0530, Thomas Abraham wrote: > Add a new Exynos4 compatible device tree enabled board file. Boards based on > the Exynos4 family of SoC's can use this as the machine/board file. When using > this machine fike, a corresponding device tree blob which describes the board's > properties should be supplied at boot time to the kernel. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> > --- > .../devicetree/bindings/arm/insignal-boards.txt | 8 ++ > .../devicetree/bindings/arm/samsung-boards.txt | 8 ++ > arch/arm/mach-exynos4/Kconfig | 14 +++ > arch/arm/mach-exynos4/Makefile | 2 + > arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 ++++++++++++++++++++ > 5 files changed, 117 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/insignal-boards.txt > create mode 100644 Documentation/devicetree/bindings/arm/samsung-boards.txt > create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c > > diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt > new file mode 100644 > index 0000000..524c3dc > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt > @@ -0,0 +1,8 @@ > +* Insignal's Exynos4210 based Origen evaluation board > + > +Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. > + > +Required root node properties: > + - compatible = should be one or more of the following. > + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt > new file mode 100644 > index 0000000..0bf68be > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > @@ -0,0 +1,8 @@ > +* Samsung's Exynos4210 based SMDKV310 evaluation board > + > +SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. > + > +Required root node properties: > + - compatible = should be one or more of the following. > + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > index 0c5888a..39dc135 100644 > --- a/arch/arm/mach-exynos4/Kconfig > +++ b/arch/arm/mach-exynos4/Kconfig > @@ -304,6 +304,20 @@ config MACH_SMDK4412 > help > Machine support for Samsung SMDK4412 > > +comment "Flattened Device Tree based board for Exynos4 based SoC" > + > +config MACH_EXYNOS4_DT > + bool "Samsung Exynos4 Machine using device tree" > + select CPU_EXYNOS4210 > + select USE_OF > + select ARM_AMBA > + select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD > + help > + Machine support for Samsung Exynos4 machine with device tree enabled. > + Select this if a fdt blob is available for the Exynos4 SoC based board. > + Note: This is under development and not all peripherals can be supported > + with this machine file. > + > endmenu > > comment "Configuration for HSMMC bus width" > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile > index 8066538..4e302cb 100644 > --- a/arch/arm/mach-exynos4/Makefile > +++ b/arch/arm/mach-exynos4/Makefile > @@ -37,6 +37,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o > obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o > obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o > > +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o > + > # device support > > obj-y += dev-audio.o > diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach-exynos4/mach-exynos4-dt.c > new file mode 100644 > index 0000000..85fa027 > --- /dev/null > +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c > @@ -0,0 +1,85 @@ > +/* > + * Samsung's Exynos4210 flattened device tree enabled machine > + * > + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * Copyright (c) 2010-2011 Linaro Ltd. > + * www.linaro.org > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/of_platform.h> > +#include <linux/serial_core.h> > + > +#include <asm/mach/arch.h> > +#include <mach/map.h> > + > +#include <plat/cpu.h> > +#include <plat/regs-serial.h> > +#include <plat/exynos4.h> > + > +/* > + * The following lookup table is used to override device names when devices > + * are registered from device tree. This is temporarily added to enable > + * device tree support addition for the Exynos4 architecture. > + * > + * For drivers that require platform data to be provided from the machine > + * file, a platform data pointer can also be supplied along with the > + * devices names. Usually, the platform data elements that cannot be parsed > + * from the device tree by the drivers (example: function pointers) are > + * supplied. But it should be noted that this is a temporary mechanism and > + * at some point, the drivers should be capable of parsing all the platform > + * data from the device tree. > + */ > +static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, > + "exynos4210-uart.0", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, > + "exynos4210-uart.1", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, > + "exynos4210-uart.2", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, > + "exynos4210-uart.3", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), > + "exynos4-sdhci.0", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), > + "exynos4-sdhci.1", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), > + "exynos4-sdhci.2", NULL), > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), > + "exynos4-sdhci.3", NULL), > + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), > + "s3c2440-i2c.0", NULL), > + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), > + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), > + {}, > +}; > + > +static void __init exynos4210_dt_map_io(void) > +{ > + s5p_init_io(NULL, 0, S5P_VA_CHIPID); > + s3c24xx_init_clocks(24000000); > +} > + > +static void __init exynos4210_dt_machine_init(void) > +{ > + of_platform_populate(NULL, of_default_bus_match_table, > + exynos4210_auxdata_lookup, NULL); > +} > + > +static char const *exynos4210_dt_compat[] __initdata = { > + "samsung,exynos4210", > + NULL > +}; > + > +DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") > + /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ > + .init_irq = exynos4_init_irq, > + .map_io = exynos4210_dt_map_io, > + .init_machine = exynos4210_dt_machine_init, > + .timer = &exynos4_timer, > + .dt_compat = exynos4210_dt_compat, > +MACHINE_END > -- > 1.6.6.rc2 >
Grant Likely wrote: > > On Tue, Oct 11, 2011 at 07:43:15PM +0530, Thomas Abraham wrote: > > Add a new Exynos4 compatible device tree enabled board file. Boards based on > > the Exynos4 family of SoC's can use this as the machine/board file. When using > > this machine fike, a corresponding device tree blob which describes the board's > > properties should be supplied at boot time to the kernel. > > > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > > Acked-by: Grant Likely <grant.likely@secretlab.ca> > Thanks for your ack :) And there are small comments...... > > --- > > .../devicetree/bindings/arm/insignal-boards.txt | 8 ++ > > .../devicetree/bindings/arm/samsung-boards.txt | 8 ++ > > arch/arm/mach-exynos4/Kconfig | 14 +++ > > arch/arm/mach-exynos4/Makefile | 2 + > > arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 > ++++++++++++++++++++ > > 5 files changed, 117 insertions(+), 0 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/arm/insignal- > boards.txt > > create mode 100644 Documentation/devicetree/bindings/arm/samsung- > boards.txt > > create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c > > > > diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt > b/Documentation/devicetree/bindings/arm/insignal-boards.txt > > new file mode 100644 > > index 0000000..524c3dc > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt > > @@ -0,0 +1,8 @@ > > +* Insignal's Exynos4210 based Origen evaluation board > > + > > +Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. > > + > > +Required root node properties: > > + - compatible = should be one or more of the following. > > + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > > + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt > b/Documentation/devicetree/bindings/arm/samsung-boards.txt > > new file mode 100644 > > index 0000000..0bf68be > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > > @@ -0,0 +1,8 @@ > > +* Samsung's Exynos4210 based SMDKV310 evaluation board > > + > > +SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. > > + > > +Required root node properties: > > + - compatible = should be one or more of the following. > > + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > > + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > > index 0c5888a..39dc135 100644 > > --- a/arch/arm/mach-exynos4/Kconfig > > +++ b/arch/arm/mach-exynos4/Kconfig > > @@ -304,6 +304,20 @@ config MACH_SMDK4412 > > help > > Machine support for Samsung SMDK4412 > > > > +comment "Flattened Device Tree based board for Exynos4 based SoC" > > + > > +config MACH_EXYNOS4_DT I'm not sure we can use 'MACH_EXYNOS4_DT' here because there are other EXYNOS4 SoCs such as EXYNOS4212 and EXYNOS4412. So if this cannot support other SoCs' boards, SMDK4212 and SMDK4412, we need to change the name. And I wonder whether there is no problem with selecting this and other boards. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > > + bool "Samsung Exynos4 Machine using device tree" > > + select CPU_EXYNOS4210 > > + select USE_OF > > + select ARM_AMBA > > + select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD > > + help > > + Machine support for Samsung Exynos4 machine with device tree > enabled. > > + Select this if a fdt blob is available for the Exynos4 SoC based board. > > + Note: This is under development and not all peripherals can be > supported > > + with this machine file. > > + > > endmenu > > > > comment "Configuration for HSMMC bus width" > > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile > > index 8066538..4e302cb 100644 > > --- a/arch/arm/mach-exynos4/Makefile > > +++ b/arch/arm/mach-exynos4/Makefile > > @@ -37,6 +37,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach- > origen.o > > obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o > > obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o > > > > +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o > > + > > # device support > > > > obj-y += dev-audio.o > > diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach- > exynos4/mach-exynos4-dt.c > > new file mode 100644 > > index 0000000..85fa027 > > --- /dev/null > > +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c > > @@ -0,0 +1,85 @@ > > +/* > > + * Samsung's Exynos4210 flattened device tree enabled machine > > + * > > + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. > > + * http://www.samsung.com > > + * Copyright (c) 2010-2011 Linaro Ltd. > > + * www.linaro.org > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > +*/ > > + > > +#include <linux/of_platform.h> > > +#include <linux/serial_core.h> > > + > > +#include <asm/mach/arch.h> > > +#include <mach/map.h> > > + > > +#include <plat/cpu.h> > > +#include <plat/regs-serial.h> > > +#include <plat/exynos4.h> > > + > > +/* > > + * The following lookup table is used to override device names when devices > > + * are registered from device tree. This is temporarily added to enable > > + * device tree support addition for the Exynos4 architecture. > > + * > > + * For drivers that require platform data to be provided from the machine > > + * file, a platform data pointer can also be supplied along with the > > + * devices names. Usually, the platform data elements that cannot be parsed > > + * from the device tree by the drivers (example: function pointers) are > > + * supplied. But it should be noted that this is a temporary mechanism and > > + * at some point, the drivers should be capable of parsing all the platform > > + * data from the device tree. > > + */ > > +static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = > { > > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, > > + "exynos4210-uart.0", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, > > + "exynos4210-uart.1", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, > > + "exynos4210-uart.2", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, > > + "exynos4210-uart.3", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", > EXYNOS4_PA_HSMMC(0), > > + "exynos4-sdhci.0", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", > EXYNOS4_PA_HSMMC(1), > > + "exynos4-sdhci.1", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", > EXYNOS4_PA_HSMMC(2), > > + "exynos4-sdhci.2", NULL), > > + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", > EXYNOS4_PA_HSMMC(3), > > + "exynos4-sdhci.3", NULL), > > + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), > > + "s3c2440-i2c.0", NULL), > > + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", > NULL), > > + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", > NULL), > > + {}, > > +}; > > + > > +static void __init exynos4210_dt_map_io(void) > > +{ > > + s5p_init_io(NULL, 0, S5P_VA_CHIPID); > > + s3c24xx_init_clocks(24000000); > > +} > > + > > +static void __init exynos4210_dt_machine_init(void) > > +{ > > + of_platform_populate(NULL, of_default_bus_match_table, > > + exynos4210_auxdata_lookup, NULL); > > +} > > + > > +static char const *exynos4210_dt_compat[] __initdata = { > > + "samsung,exynos4210", > > + NULL > > +}; > > + > > +DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device > Tree)") > > + /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ > > + .init_irq = exynos4_init_irq, > > + .map_io = exynos4210_dt_map_io, > > + .init_machine = exynos4210_dt_machine_init, > > + .timer = &exynos4_timer, > > + .dt_compat = exynos4210_dt_compat, > > +MACHINE_END > > -- > > 1.6.6.rc2 > >
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt new file mode 100644 index 0000000..524c3dc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt @@ -0,0 +1,8 @@ +* Insignal's Exynos4210 based Origen evaluation board + +Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. + +Required root node properties: + - compatible = should be one or more of the following. + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt new file mode 100644 index 0000000..0bf68be --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -0,0 +1,8 @@ +* Samsung's Exynos4210 based SMDKV310 evaluation board + +SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC. + +Required root node properties: + - compatible = should be one or more of the following. + (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. + (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c5888a..39dc135 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -304,6 +304,20 @@ config MACH_SMDK4412 help Machine support for Samsung SMDK4412 +comment "Flattened Device Tree based board for Exynos4 based SoC" + +config MACH_EXYNOS4_DT + bool "Samsung Exynos4 Machine using device tree" + select CPU_EXYNOS4210 + select USE_OF + select ARM_AMBA + select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + help + Machine support for Samsung Exynos4 machine with device tree enabled. + Select this if a fdt blob is available for the Exynos4 SoC based board. + Note: This is under development and not all peripherals can be supported + with this machine file. + endmenu comment "Configuration for HSMMC bus width" diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 8066538..4e302cb 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -37,6 +37,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o + # device support obj-y += dev-audio.o diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach-exynos4/mach-exynos4-dt.c new file mode 100644 index 0000000..85fa027 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c @@ -0,0 +1,85 @@ +/* + * Samsung's Exynos4210 flattened device tree enabled machine + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/of_platform.h> +#include <linux/serial_core.h> + +#include <asm/mach/arch.h> +#include <mach/map.h> + +#include <plat/cpu.h> +#include <plat/regs-serial.h> +#include <plat/exynos4.h> + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the Exynos4 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0, + "exynos4210-uart.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1, + "exynos4210-uart.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2, + "exynos4210-uart.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3, + "exynos4210-uart.3", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0), + "exynos4-sdhci.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1), + "exynos4-sdhci.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2), + "exynos4-sdhci.2", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3), + "exynos4-sdhci.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), + "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + {}, +}; + +static void __init exynos4210_dt_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); +} + +static void __init exynos4210_dt_machine_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + exynos4210_auxdata_lookup, NULL); +} + +static char const *exynos4210_dt_compat[] __initdata = { + "samsung,exynos4210", + NULL +}; + +DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") + /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .init_irq = exynos4_init_irq, + .map_io = exynos4210_dt_map_io, + .init_machine = exynos4210_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos4210_dt_compat, +MACHINE_END
Add a new Exynos4 compatible device tree enabled board file. Boards based on the Exynos4 family of SoC's can use this as the machine/board file. When using this machine fike, a corresponding device tree blob which describes the board's properties should be supplied at boot time to the kernel. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- .../devicetree/bindings/arm/insignal-boards.txt | 8 ++ .../devicetree/bindings/arm/samsung-boards.txt | 8 ++ arch/arm/mach-exynos4/Kconfig | 14 +++ arch/arm/mach-exynos4/Makefile | 2 + arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 ++++++++++++++++++++ 5 files changed, 117 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/insignal-boards.txt create mode 100644 Documentation/devicetree/bindings/arm/samsung-boards.txt create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c