@@ -15587,6 +15587,13 @@ F: include/linux/rpmsg/
F: include/uapi/linux/rpmsg.h
F: samples/rpmsg/
+REMOTE PROCESSOR MESSAGING (RPMSG) WWAN CONTROL DRIVER
+M: Stephan Gerhold <stephan@gerhold.net>
+L: netdev@vger.kernel.org
+L: linux-remoteproc@vger.kernel.org
+S: Maintained
+F: drivers/net/wwan/rpmsg_wwan_ctrl.c
+
RENESAS CLOCK DRIVERS
M: Geert Uytterhoeven <geert+renesas@glider.be>
L: linux-renesas-soc@vger.kernel.org
@@ -38,6 +38,24 @@ config MHI_WWAN_CTRL
To compile this driver as a module, choose M here: the module will be
called mhi_wwan_ctrl.
+config RPMSG_WWAN_CTRL
+ tristate "RPMSG WWAN control driver"
+ depends on RPMSG
+ help
+ RPMSG WWAN CTRL allows modems available via RPMSG channels to expose
+ different modem protocols/ports to userspace, including AT and QMI.
+ These protocols can be accessed directly from userspace
+ (e.g. AT commands) or via libraries/tools (e.g. libqmi, libqcdm...).
+
+ This is mainly used for modems integrated into many Qualcomm SoCs,
+ e.g. for AT and QMI on Qualcomm MSM8916 or MSM8974. Note that many
+ newer Qualcomm SoCs (e.g. SDM845) still provide an AT port through
+ this driver but the QMI messages can only be sent through
+ QRTR network sockets (CONFIG_QRTR).
+
+ To compile this driver as a module, choose M here: the module will be
+ called rpmsg_wwan_ctrl.
+
config IOSM
tristate "IOSM Driver for Intel M.2 WWAN Device"
depends on INTEL_IOMMU
@@ -9,4 +9,5 @@ wwan-objs += wwan_core.o
obj-$(CONFIG_WWAN_HWSIM) += wwan_hwsim.o
obj-$(CONFIG_MHI_WWAN_CTRL) += mhi_wwan_ctrl.o
+obj-$(CONFIG_RPMSG_WWAN_CTRL) += rpmsg_wwan_ctrl.o
obj-$(CONFIG_IOSM) += iosm/
new file mode 100644
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2021, Stephan Gerhold <stephan@gerhold.net> */
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
+#include <linux/wwan.h>
+
+struct rpmsg_wwan_dev {
+ /* Lower level is a rpmsg dev, upper level is a wwan port */
+ struct rpmsg_device *rpdev;
+ struct wwan_port *wwan_port;
+ struct rpmsg_endpoint *ept;
+};
+
+static int rpmsg_wwan_ctrl_callback(struct rpmsg_device *rpdev,
+ void *buf, int len, void *priv, u32 src)
+{
+ struct rpmsg_wwan_dev *rpwwan = priv;
+ struct sk_buff *skb;
+
+ skb = alloc_skb(len, GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_put_data(skb, buf, len);
+ wwan_port_rx(rpwwan->wwan_port, skb);
+ return 0;
+}
+
+static int rpmsg_wwan_ctrl_start(struct wwan_port *port)
+{
+ struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
+ struct rpmsg_channel_info chinfo = {
+ .src = rpwwan->rpdev->src,
+ .dst = RPMSG_ADDR_ANY,
+ };
+
+ strncpy(chinfo.name, rpwwan->rpdev->id.name, RPMSG_NAME_SIZE);
+ rpwwan->ept = rpmsg_create_ept(rpwwan->rpdev, rpmsg_wwan_ctrl_callback,
+ rpwwan, chinfo);
+ if (!rpwwan->ept)
+ return -EREMOTEIO;
+
+ return 0;
+}
+
+static void rpmsg_wwan_ctrl_stop(struct wwan_port *port)
+{
+ struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
+
+ rpmsg_destroy_ept(rpwwan->ept);
+ rpwwan->ept = NULL;
+}
+
+static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
+{
+ struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
+ int ret;
+
+ ret = rpmsg_trysend(rpwwan->ept, skb->data, skb->len);
+ if (ret)
+ return ret;
+
+ consume_skb(skb);
+ return 0;
+}
+
+static const struct wwan_port_ops rpmsg_wwan_pops = {
+ .start = rpmsg_wwan_ctrl_start,
+ .stop = rpmsg_wwan_ctrl_stop,
+ .tx = rpmsg_wwan_ctrl_tx,
+};
+
+static struct device *rpmsg_wwan_find_parent(struct device *dev)
+{
+ /* Select first platform device as parent for the WWAN ports.
+ * On Qualcomm platforms this is usually the platform device that
+ * represents the modem remote processor. This might need to be
+ * adjusted when adding device IDs for other platforms.
+ */
+ for (dev = dev->parent; dev; dev = dev->parent) {
+ if (dev_is_platform(dev))
+ return dev;
+ }
+ return NULL;
+}
+
+static int rpmsg_wwan_ctrl_probe(struct rpmsg_device *rpdev)
+{
+ struct rpmsg_wwan_dev *rpwwan;
+ struct wwan_port *port;
+ struct device *parent;
+
+ parent = rpmsg_wwan_find_parent(&rpdev->dev);
+ if (!parent)
+ return -ENODEV;
+
+ rpwwan = devm_kzalloc(&rpdev->dev, sizeof(*rpwwan), GFP_KERNEL);
+ if (!rpwwan)
+ return -ENOMEM;
+
+ rpwwan->rpdev = rpdev;
+ dev_set_drvdata(&rpdev->dev, rpwwan);
+
+ /* Register as a wwan port, id.driver_data contains wwan port type */
+ port = wwan_create_port(parent, rpdev->id.driver_data,
+ &rpmsg_wwan_pops, rpwwan);
+ if (IS_ERR(port))
+ return PTR_ERR(port);
+
+ rpwwan->wwan_port = port;
+
+ return 0;
+};
+
+static void rpmsg_wwan_ctrl_remove(struct rpmsg_device *rpdev)
+{
+ struct rpmsg_wwan_dev *rpwwan = dev_get_drvdata(&rpdev->dev);
+
+ wwan_remove_port(rpwwan->wwan_port);
+}
+
+static const struct rpmsg_device_id rpmsg_wwan_ctrl_id_table[] = {
+ /* RPMSG channels for Qualcomm SoCs with integrated modem */
+ { .name = "DATA5_CNTL", .driver_data = WWAN_PORT_QMI },
+ { .name = "DATA4", .driver_data = WWAN_PORT_AT },
+ {},
+};
+MODULE_DEVICE_TABLE(rpmsg, rpmsg_wwan_ctrl_id_table);
+
+static struct rpmsg_driver rpmsg_wwan_ctrl_driver = {
+ .drv.name = "rpmsg_wwan_ctrl",
+ .id_table = rpmsg_wwan_ctrl_id_table,
+ .probe = rpmsg_wwan_ctrl_probe,
+ .remove = rpmsg_wwan_ctrl_remove,
+};
+module_rpmsg_driver(rpmsg_wwan_ctrl_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("RPMSG WWAN CTRL Driver");
+MODULE_AUTHOR("Stephan Gerhold <stephan@gerhold.net>");
The remote processor messaging (rpmsg) subsystem provides an interface to communicate with other remote processors. On many Qualcomm SoCs this is used to communicate with an integrated modem DSP that implements most of the modem functionality and provides high-level protocols like QMI or AT to allow controlling the modem. For QMI, most older Qualcomm SoCs (e.g. MSM8916/MSM8974) have a standalone "DATA5_CNTL" channel that allows exchanging QMI messages. Note that newer SoCs (e.g. SDM845) only allow exchanging QMI messages via a shared QRTR channel that is available via a socket API on Linux. For AT, the "DATA4" channel accepts at least a limited set of AT commands, on many older and newer Qualcomm SoCs, although QMI is typically the preferred control protocol. Often there are additional QMI/AT channels (usually named DATA*_CNTL for QMI and DATA* for AT), but it is not clear if those are really functional on all devices. Also, at the moment there is no use case for having multiple QMI/AT ports. If needed more channels could be added later after more testing. Note that the data path (network interface) is entirely separate from the control path and varies between Qualcomm SoCs, e.g. "IPA" on newer Qualcomm SoCs or "BAM-DMUX" on some older ones. The RPMSG WWAN CTRL driver exposes the QMI/AT control ports via the WWAN subsystem, and therefore allows userspace like ModemManager to set up the modem. Until now, ModemManager had to use the RPMSG-specific rpmsg-char where the channels must be explicitly exposed as a char device first and don't show up directly in sysfs. The driver is a fairly simple glue layer between WWAN and RPMSG and is mostly based on the existing mhi_wwan_ctrl.c and rpmsg_char.c. Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- Changes in v3: - Clarify commit message, add note about additional channels that could be added to the driver in the future when needed. (Related discussion in v2: https://lore.kernel.org/netdev/CAAP7ucKHXv_Wu7dpSmPpy1utMZV5iXGOjGg87AbcR4j+Xcz=WA@mail.gmail.com/) Changes in v2: None --- Notes from v1: I have mainly tested this driver on Qualcomm MSM8916 with the qcom_smd RPMSG provider, together with both ModemManager and oFono in userspace. Note that this driver can also work somewhat with the "glink" RPMSG provider on newer SoCs (mainly for AT ports), but for some reason dynamically opening and closing channels like this driver and rpmsg-char do is horribly broken there. I'm hoping someone with more experience and hardware can fix that later. --- MAINTAINERS | 7 ++ drivers/net/wwan/Kconfig | 18 ++++ drivers/net/wwan/Makefile | 1 + drivers/net/wwan/rpmsg_wwan_ctrl.c | 143 +++++++++++++++++++++++++++++ 4 files changed, 169 insertions(+) create mode 100644 drivers/net/wwan/rpmsg_wwan_ctrl.c