diff mbox series

dt-bindings: regulator: Convert UniPhier regulator to json-schema

Message ID 1624413137-17453-1-git-send-email-hayashi.kunihiko@socionext.com
State Accepted
Commit 442a9d105e61591b36b653ba1ee0c02b0482b639
Headers show
Series dt-bindings: regulator: Convert UniPhier regulator to json-schema | expand

Commit Message

Kunihiko Hayashi June 23, 2021, 1:52 a.m. UTC 
Convert the UniPhier regulator binding to DT schema format.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

---
 .../regulator/socionext,uniphier-regulator.yaml    | 85 ++++++++++++++++++++++
 .../bindings/regulator/uniphier-regulator.txt      | 58 ---------------
 2 files changed, 85 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
 delete mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

-- 
2.7.4

Comments

Rob Herring July 14, 2021, 7:14 p.m. UTC | #1 
On Wed, 23 Jun 2021 10:52:17 +0900, Kunihiko Hayashi wrote:
> Convert the UniPhier regulator binding to DT schema format.

> 

> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

> ---

>  .../regulator/socionext,uniphier-regulator.yaml    | 85 ++++++++++++++++++++++

>  .../bindings/regulator/uniphier-regulator.txt      | 58 ---------------

>  2 files changed, 85 insertions(+), 58 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml

>  delete mode 100644 Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

> 


Reviewed-by: Rob Herring <robh@kernel.org>
Mark Brown July 15, 2021, 12:37 p.m. UTC | #2 
On Wed, 23 Jun 2021 10:52:17 +0900, Kunihiko Hayashi wrote:
> Convert the UniPhier regulator binding to DT schema format.


Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] dt-bindings: regulator: Convert UniPhier regulator to json-schema
      commit: 442a9d105e61591b36b653ba1ee0c02b0482b639

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
new file mode 100644
index 0000000..861d5f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -0,0 +1,85 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+  This regulator controls VBUS and belongs to USB3 glue layer. Before using
+  the regulator, it is necessary to control the clocks and resets to enable
+  this layer. These clocks and resets should be described in each property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+# USB3 Controller
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-regulator
+      - socionext,uniphier-pro5-usb3-regulator
+      - socionext,uniphier-pxs2-usb3-regulator
+      - socionext,uniphier-ld20-usb3-regulator
+      - socionext,uniphier-pxs3-usb3-regulator
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:          # for others
+          - const: link
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:
+          - const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_vbus0: regulators@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
deleted file mode 100644
index 94fd38b..0000000
--- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
+++ /dev/null
@@ -1,58 +0,0 @@ 
-Socionext UniPhier Regulator Controller
-
-This describes the devicetree bindings for regulator controller implemented
-on Socionext UniPhier SoCs.
-
-USB3 Controller
----------------
-
-This regulator controls VBUS and belongs to USB3 glue layer. Before using
-the regulator, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
-    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
-    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
-    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_vbus0: regulators@100 {
-			compatible = "socionext,uniphier-ld20-usb3-regulator";
-			reg = <0x100 0x10>;
-			clock-names = "link";
-			clocks = <&sys_clk 14>;
-			reset-names = "link";
-			resets = <&sys_rst 14>;
-		};
-
-		phy {
-			...
-			phy-supply = <&usb_vbus0>;
-		};
-		...
-	};