diff mbox series

[1/3] dt-bindings: power: reset: Convert qcom,pon to DT schema

Message ID 20210704074045.21643-2-shawn.guo@linaro.org
State New
Headers show
Series Add 'qcom,mode-in-imem' support in PON driver | expand

Commit Message

Shawn Guo July 4, 2021, 7:40 a.m. UTC 
It converts qcom,pon DT bindings from legacy bare text to YAML format.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../bindings/power/reset/qcom,pon.txt         | 49 -------------------
 .../bindings/power/reset/qcom,pon.yaml        | 49 +++++++++++++++++++
 2 files changed, 49 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt
 create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a1e693..000000000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@ 
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
-	"qcom,pm8916-pon"
-	"qcom,pms405-pon"
-	"qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
-	pon@800 {
-		compatible = "qcom,pm8916-pon";
-
-		reg = <0x800>;
-		mode-bootloader = <0x2>;
-		mode-recovery = <0x1>;
-
-		pwrkey {
-			compatible = "qcom,pm8941-pwrkey";
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_POWER>;
-		};
-
-		resin {
-			compatible = "qcom,pm8941-resin";
-			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 000000000000..7764c804af1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,49 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+  and resin along with the Android reboot-mode.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8916-pon
+      - qcom,pms405-pon
+      - qcom,pm8998-pon
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8916-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+        };
+    };