@@ -1444,10 +1444,6 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_OPT_CLKS_IN_RESET),
SYSC_QUIRK("sham", 0, 0x100, 0x110, 0x114, 0x40000c03, 0xffffffff,
SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x24, -ENODEV, 0x00000000, 0xffffffff,
- SYSC_QUIRK_LEGACY_IDLE),
- SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x38, -ENODEV, 0x00000000, 0xffffffff,
- SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
@@ -1583,6 +1579,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("sdma", 0, 0, 0x2c, 0x28, 0x00010900, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40000902, 0xffffffff, 0),
SYSC_QUIRK("slimbus", 0, 0, 0x10, -ENODEV, 0x40002903, 0xffffffff, 0),
+ SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x24, -ENODEV, 0x00000000, 0xffffffff, 0),
+ SYSC_QUIRK("smartreflex", 0, -ENODEV, 0x38, -ENODEV, 0x00000000, 0xffffffff, 0),
SYSC_QUIRK("spinlock", 0, 0, 0x10, -ENODEV, 0x50020000, 0xffffffff, 0),
SYSC_QUIRK("rng", 0, 0x1fe0, 0x1fe4, -ENODEV, 0x00000020, 0xffffffff, 0),
SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000013, 0xffffffff, 0),
@@ -126,23 +126,13 @@ static irqreturn_t sr_interrupt(int irq, void *data)
static void sr_set_clk_length(struct omap_sr *sr)
{
- struct clk *fck;
u32 fclk_speed;
/* Try interconnect target module fck first if it already exists */
- fck = clk_get(sr->pdev->dev.parent, "fck");
- if (IS_ERR(fck)) {
- fck = clk_get(&sr->pdev->dev, "fck");
- if (IS_ERR(fck)) {
- dev_err(&sr->pdev->dev,
- "%s: unable to get fck for device %s\n",
- __func__, dev_name(&sr->pdev->dev));
- return;
- }
- }
+ if (IS_ERR(sr->fck))
+ return;
- fclk_speed = clk_get_rate(fck);
- clk_put(fck);
+ fclk_speed = clk_get_rate(sr->fck);
switch (fclk_speed) {
case 12000000:
@@ -587,21 +577,25 @@ int sr_enable(struct omap_sr *sr, unsigned long volt)
/* errminlimit is opp dependent and hence linked to voltage */
sr->err_minlimit = nvalue_row->errminlimit;
- pm_runtime_get_sync(&sr->pdev->dev);
+ clk_enable(sr->fck);
/* Check if SR is already enabled. If yes do nothing */
if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
- return 0;
+ goto out_enabled;
/* Configure SR */
ret = sr_class->configure(sr);
if (ret)
- return ret;
+ goto out_enabled;
sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
/* SRCONFIG - enable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+
+out_enabled:
+ sr->enabled = 1;
+
return 0;
}
@@ -621,7 +615,7 @@ void sr_disable(struct omap_sr *sr)
}
/* Check if SR clocks are already disabled. If yes do nothing */
- if (pm_runtime_suspended(&sr->pdev->dev))
+ if (!sr->enabled)
return;
/*
@@ -642,7 +636,8 @@ void sr_disable(struct omap_sr *sr)
}
}
- pm_runtime_put_sync_suspend(&sr->pdev->dev);
+ clk_disable(sr->fck);
+ sr->enabled = 0;
}
/**
@@ -851,8 +846,12 @@ static int omap_sr_probe(struct platform_device *pdev)
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ sr_info->fck = devm_clk_get(pdev->dev.parent, "fck");
+ if (IS_ERR(sr_info->fck))
+ return PTR_ERR(sr_info->fck);
+ clk_prepare(sr_info->fck);
+
pm_runtime_enable(&pdev->dev);
- pm_runtime_irq_safe(&pdev->dev);
snprintf(sr_info->name, SMARTREFLEX_NAME_LEN, "%s", pdata->name);
@@ -878,12 +877,6 @@ static int omap_sr_probe(struct platform_device *pdev)
list_add(&sr_info->node, &sr_list);
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
- pm_runtime_put_noidle(&pdev->dev);
- goto err_list_del;
- }
-
/*
* Call into late init to do initializations that require
* both sr driver and sr class driver to be initiallized.
@@ -933,16 +926,13 @@ static int omap_sr_probe(struct platform_device *pdev)
}
- pm_runtime_put_sync(&pdev->dev);
-
return ret;
err_debugfs:
debugfs_remove_recursive(sr_info->dbg_dir);
err_list_del:
list_del(&sr_info->node);
-
- pm_runtime_put_sync(&pdev->dev);
+ clk_unprepare(sr_info->fck);
return ret;
}
@@ -950,6 +940,7 @@ static int omap_sr_probe(struct platform_device *pdev)
static int omap_sr_remove(struct platform_device *pdev)
{
struct omap_sr_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
struct omap_sr *sr_info;
if (!pdata) {
@@ -968,7 +959,8 @@ static int omap_sr_remove(struct platform_device *pdev)
sr_stop_vddautocomp(sr_info);
debugfs_remove_recursive(sr_info->dbg_dir);
- pm_runtime_disable(&pdev->dev);
+ pm_runtime_disable(dev);
+ clk_unprepare(sr_info->fck);
list_del(&sr_info->node);
return 0;
}
@@ -155,6 +155,7 @@ struct omap_sr {
struct voltagedomain *voltdm;
struct dentry *dbg_dir;
unsigned int irq;
+ struct clk *fck;
int srid;
int ip_type;
int nvalue_count;
@@ -169,6 +170,7 @@ struct omap_sr {
u32 senp_mod;
u32 senn_mod;
void __iomem *base;
+ unsigned long enabled:1;
};
/**
For the smartreflex device, we need to disable smartreflex on SoC idle, and have been using pm_runtime_irq_safe() to do that. But we want to remove the irq_safe usage as PM runtime takes a permanent usage count on the parent device with it. In order to remove the need for pm_runtime_irq_safe(), let's gate the clock directly in the driver. This removes the need to call PM runtime during idle, and allows us to switch to using CPU_PM in the following patch. Note that the smartreflex interconnect target module is configured for smart idle, but the clock does not have autoidle capability, and needs to be gated manually. If the clock supported autoidle, we would not need to even gate the clock. With this change, we can now remove the related quirk flags for ti-sysc also. Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/bus/ti-sysc.c | 6 ++-- drivers/soc/ti/smartreflex.c | 52 +++++++++++++------------------ include/linux/power/smartreflex.h | 2 ++ 3 files changed, 26 insertions(+), 34 deletions(-)