@@ -18,6 +18,7 @@ / {
#size-cells = <2>;
aliases {
+ ethernet1 = &gmac1;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
@@ -344,6 +345,53 @@ sdmmc2: mmc@fe000000 {
status = "disabled";
};
+ gmac1: ethernet@fe010000 {
+ compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe010000 0x0 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>,
+ <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>,
+ <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>,
+ <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_refout",
+ "aclk_mac", "pclk_mac",
+ "clk_mac_speed", "ptp_ref";
+ resets = <&cru SRST_A_GMAC1>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ snps,mixed-burst;
+ snps,tso;
+ snps,axi-config = <&gmac1_stmmac_axi_setup>;
+ snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac1_stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <8>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+
+ gmac1_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ queue0 {};
+ };
+
+ gmac1_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ queue0 {};
+ };
+ };
+
qos_gpu: qos@fe128000 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe128000 0x0 0x20>;
Add the gmac1 controller to the rk356x device tree. This is the controller common to both the rk3568 and rk3566. Signed-off-by: Peter Geis <pgwipeout@gmail.com> --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 48 ++++++++++++++++++++++++ 1 file changed, 48 insertions(+)