diff mbox

[1/6] spi/pl022: only enable RX interrupts when TX is complete

Message ID 1320835130-31201-1-git-send-email-linus.walleij@stericsson.com
State Superseded
Headers show

Commit Message

Linus Walleij Nov. 9, 2011, 10:38 a.m. UTC 
From: Chris Blair <chris.blair@stericsson.com>

For interrupt mode transfers, start with only TX interrupts enabled
to reduce the overall number of interrupts received. Once TX is
complete, enable RX interrupts to complete the transfer.

Signed-off-by: Chris Blair <chris.blair@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/spi/spi-pl022.c |   14 +++++++++-----
 1 files changed, 9 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 5559b22..b251926 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1244,9 +1244,9 @@  static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 
 	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
 		flag = 1;
-		/* Disable Transmit interrupt */
-		writew(readw(SSP_IMSC(pl022->virtbase)) &
-		       (~SSP_IMSC_MASK_TXIM),
+		/* Disable Transmit interrupt, enable receive interrupt */
+		writew((readw(SSP_IMSC(pl022->virtbase)) &
+		       ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM,
 		       SSP_IMSC(pl022->virtbase));
 	}
 
@@ -1379,12 +1379,16 @@  static void pump_transfers(unsigned long data)
 	}
 
 err_config_dma:
-	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	/* enable all interrupts except RX */
+	writew(ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM, SSP_IMSC(pl022->virtbase));
 }
 
 static void do_interrupt_dma_transfer(struct pl022 *pl022)
 {
-	u32 irqflags = ENABLE_ALL_INTERRUPTS;
+	/* default is to enable all interrupts except RX -
+	 * this will be enabled once TX is complete
+	 */
+	u32 irqflags = ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM;
 
 	/* Enable target chip */
 	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);