@@ -32,6 +32,8 @@
* An IPA clock reference must be held for any access to IPA hardware.
*/
+#define IPA_AUTOSUSPEND_DELAY 500 /* milliseconds */
+
/**
* struct ipa_interconnect - IPA interconnect information
* @path: Interconnect path
@@ -267,11 +269,6 @@ static int ipa_runtime_resume(struct device *dev)
return 0;
}
-static int ipa_runtime_idle(struct device *dev)
-{
- return -EAGAIN;
-}
-
static int ipa_suspend(struct device *dev)
{
struct ipa *ipa = dev_get_drvdata(dev);
@@ -443,7 +440,8 @@ ipa_clock_init(struct device *dev, const struct ipa_clock_data *data)
if (ret)
goto err_kfree;
- pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_set_autosuspend_delay(dev, IPA_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(dev);
pm_runtime_enable(dev);
return clock;
@@ -459,9 +457,11 @@ ipa_clock_init(struct device *dev, const struct ipa_clock_data *data)
/* Inverse of ipa_clock_init() */
void ipa_clock_exit(struct ipa_clock *clock)
{
+ struct device *dev = clock->dev;
struct clk *clk = clock->core;
- pm_runtime_disable(clock->dev);
+ pm_runtime_disable(dev);
+ pm_runtime_dont_use_autosuspend(dev);
ipa_interconnect_exit(clock);
kfree(clock);
clk_put(clk);
@@ -472,5 +472,4 @@ const struct dev_pm_ops ipa_pm_ops = {
.resume = ipa_resume,
.runtime_suspend = ipa_runtime_suspend,
.runtime_resume = ipa_runtime_resume,
- .runtime_idle = ipa_runtime_idle,
};
@@ -116,7 +116,8 @@ static irqreturn_t ipa_isr_thread(int irq, void *dev_id)
iowrite32(pending, ipa->reg_virt + offset);
}
out_power_put:
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
return IRQ_HANDLED;
}
@@ -766,14 +766,15 @@ static int ipa_probe(struct platform_device *pdev)
if (ret)
goto err_deconfig;
done:
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
return 0;
err_deconfig:
ipa_deconfig(ipa);
err_power_put:
- (void)pm_runtime_put(dev);
+ pm_runtime_put_noidle(dev);
ipa_modem_exit(ipa);
err_table_exit:
ipa_table_exit(ipa);
@@ -797,9 +798,10 @@ static int ipa_remove(struct platform_device *pdev)
{
struct ipa *ipa = dev_get_drvdata(&pdev->dev);
struct ipa_clock *clock = ipa->clock;
+ struct device *dev = &pdev->dev;
int ret;
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_get_sync(dev);
if (WARN_ON(ret < 0))
goto out_power_put;
@@ -818,8 +820,7 @@ static int ipa_remove(struct platform_device *pdev)
ipa_deconfig(ipa);
out_power_put:
- (void)pm_runtime_put(&pdev->dev);
-
+ pm_runtime_put_noidle(dev);
ipa_modem_exit(ipa);
ipa_table_exit(ipa);
ipa_endpoint_exit(ipa);
@@ -67,14 +67,15 @@ static int ipa_open(struct net_device *netdev)
netif_start_queue(netdev);
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
return 0;
err_disable_tx:
ipa_endpoint_disable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]);
err_power_put:
- (void)pm_runtime_put(dev);
+ pm_runtime_put_noidle(dev);
return ret;
}
@@ -97,7 +98,8 @@ static int ipa_stop(struct net_device *netdev)
ipa_endpoint_disable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_RX]);
ipa_endpoint_disable_one(ipa->name_map[IPA_ENDPOINT_AP_MODEM_TX]);
out_power_put:
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
return 0;
}
@@ -145,7 +147,7 @@ ipa_start_xmit(struct sk_buff *skb, struct net_device *netdev)
*/
ipa_power_modem_queue_stop(ipa);
- (void)pm_runtime_put(dev);
+ pm_runtime_put_noidle(dev);
return NETDEV_TX_BUSY;
}
@@ -154,7 +156,8 @@ ipa_start_xmit(struct sk_buff *skb, struct net_device *netdev)
ret = ipa_endpoint_skb_tx(endpoint, skb);
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
if (ret) {
if (ret != -E2BIG)
@@ -398,7 +401,8 @@ static void ipa_modem_crashed(struct ipa *ipa)
dev_err(dev, "error %d zeroing modem memory regions\n", ret);
out_power_put:
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
}
static int ipa_modem_notify(struct notifier_block *nb, unsigned long action,
@@ -174,7 +174,8 @@ static irqreturn_t ipa_smp2p_modem_setup_ready_isr(int irq, void *dev_id)
WARN(ret != 0, "error %d from ipa_setup()\n", ret);
out_power_put:
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
out_mutex_unlock:
mutex_unlock(&smp2p->mutex);
@@ -211,10 +212,13 @@ static void ipa_smp2p_irq_exit(struct ipa_smp2p *smp2p, u32 irq)
/* Drop the clock reference if it was taken in ipa_smp2p_notify() */
static void ipa_smp2p_clock_release(struct ipa *ipa)
{
+ struct device *dev = &ipa->pdev->dev;
+
if (!ipa->smp2p->clock_on)
return;
- (void)pm_runtime_put(&ipa->pdev->dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
ipa->smp2p->clock_on = false;
}
@@ -154,7 +154,8 @@ static void ipa_uc_response_hdlr(struct ipa *ipa, enum ipa_irq_id irq_id)
case IPA_UC_RESPONSE_INIT_COMPLETED:
if (ipa->uc_clocked) {
ipa->uc_loaded = true;
- (void)pm_runtime_put(dev);
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
ipa->uc_clocked = false;
} else {
dev_warn(dev, "unexpected init_completed response\n");
@@ -179,10 +180,15 @@ void ipa_uc_config(struct ipa *ipa)
/* Inverse of ipa_uc_config() */
void ipa_uc_deconfig(struct ipa *ipa)
{
+ struct device *dev = &ipa->pdev->dev;
+
ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_UC_1);
ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_UC_0);
- if (ipa->uc_clocked)
- (void)pm_runtime_put(&ipa->pdev->dev);
+ if (!ipa->uc_clocked)
+ return;
+
+ pm_runtime_mark_last_busy(dev);
+ (void)pm_runtime_put_autosuspend(dev);
}
/* Take a proxy clock reference for the microcontroller */
Use runtime power management autosuspend. Up until this point, we only suspended the IPA hardware for system suspend; now we'll suspend it aggressively using runtime power management, setting the initial autosuspend delay to half a second of inactivity. Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(), call pm_runtime_mark_last_busy() before each of those. In places where we're shutting things down, or decrementing power references for errors, use pm_runtime_put_noidle() instead. Finally, remove ipa_runtime_idle(), so the ->runtime_suspend callback will occur if idle. Signed-off-by: Alex Elder <elder@linaro.org> --- drivers/net/ipa/ipa_clock.c | 15 +++++++-------- drivers/net/ipa/ipa_interrupt.c | 3 ++- drivers/net/ipa/ipa_main.c | 11 ++++++----- drivers/net/ipa/ipa_modem.c | 16 ++++++++++------ drivers/net/ipa/ipa_smp2p.c | 8 ++++++-- drivers/net/ipa/ipa_uc.c | 12 +++++++++--- 6 files changed, 40 insertions(+), 25 deletions(-) -- 2.27.0