@@ -38,6 +38,7 @@
* @voltage_mask: mask to control regulator voltage
* @voltages: supported voltage table
* @voltages_len: number of supported voltages for the regulator
+ * @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
struct device *dev;
@@ -55,6 +56,7 @@ struct ab8500_regulator_info {
u8 voltage_mask;
int const *voltages;
int voltages_len;
+ unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
@@ -290,6 +292,29 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
return ret;
}
+static int ab8500_regulator_enable_time(struct regulator_dev *rdev)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ return info->delay;
+}
+
+static int ab8500_regulator_set_voltage_time(struct regulator_dev *rdev,
+ int old_voltage,
+ int new_voltage)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ int ret;
+
+ /* If the regulator isn't on, it won't take time here */
+ ret = ab8500_regulator_is_enabled(rdev);
+ if (ret < 0)
+ return ret;
+ if (!ret)
+ return 0;
+ return info->delay;
+}
+
static struct regulator_ops ab8500_regulator_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
@@ -297,6 +322,8 @@ static struct regulator_ops ab8500_regulator_ops = {
.get_voltage = ab8500_regulator_get_voltage,
.set_voltage = ab8500_regulator_set_voltage,
.list_voltage = ab8500_list_voltage,
+ .enable_time = ab8500_regulator_enable_time,
+ .set_voltage_time = ab8500_regulator_set_voltage_time,
};
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
@@ -317,6 +344,8 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage = ab8500_fixed_get_voltage,
.list_voltage = ab8500_list_voltage,
+ .enable_time = ab8500_regulator_enable_time,
+ .set_voltage_time = ab8500_regulator_set_voltage_time,
};
static struct ab8500_regulator_info
@@ -426,6 +455,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
},
+ .delay = 10000,
.fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x80,