diff mbox series

[v2,07/12] iwlwifi: mvm: don't use FW key ID in beacon protection

Message ID iwlwifi.20210826224715.30e665d39b07.I78bf7d304ef5a80cecf5fa1c1fca0b51b956cceb@changeid
State New
Headers show
Series iwlwifi: updates intended for v5.15 2021-08-20 v2 | expand

Commit Message

Luca Coelho Aug. 26, 2021, 7:47 p.m. UTC 
From: Johannes Berg <johannes.berg@intel.com>

To check beacon protection had a mismatch of the key ID we
currently use the key ID from the firmware, but firmware
side we want to clean up the API to stop reporting this.

Instead, check the IWL_RX_MPDU_STATUS_KEY_VALID bit that
indicates that the firmware used the correct key, and if
that's set but we get invalid MIC/replay use the key ID
from the frame to look up the key and notify mac80211 of
MIC error or replay. Since both keys must have the same
cipher and thus MIC length, we can use either of them to
look up the MIC length.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 41 ++++++++++++-------
 1 file changed, 27 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 06cc03820dd5..c12f303cf652 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -279,7 +279,6 @@  static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 {
 	struct iwl_mvm_sta *mvmsta;
 	struct iwl_mvm_vif *mvmvif;
-	u8 fwkeyid = u32_get_bits(status, IWL_RX_MPDU_STATUS_KEY);
 	u8 keyid;
 	struct ieee80211_key_conf *key;
 	u32 len = le16_to_cpu(desc->mpdu_len);
@@ -299,6 +298,10 @@  static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 	if (!ieee80211_is_beacon(hdr->frame_control))
 		return 0;
 
+	/* key mismatch - will also report !MIC_OK but we shouldn't count it */
+	if (!(status & IWL_RX_MPDU_STATUS_KEY_VALID))
+		return -1;
+
 	/* good cases */
 	if (likely(status & IWL_RX_MPDU_STATUS_MIC_OK &&
 		   !(status & IWL_RX_MPDU_STATUS_REPLAY_ERROR)))
@@ -309,26 +312,36 @@  static int iwl_mvm_rx_mgmt_prot(struct ieee80211_sta *sta,
 
 	mvmsta = iwl_mvm_sta_from_mac80211(sta);
 
-	/* what? */
-	if (fwkeyid != 6 && fwkeyid != 7)
-		return -1;
-
 	mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif);
 
-	key = rcu_dereference(mvmvif->bcn_prot.keys[fwkeyid - 6]);
-	if (!key)
-		return -1;
+	/*
+	 * both keys will have the same cipher and MIC length, use
+	 * whichever one is available
+	 */
+	key = rcu_dereference(mvmvif->bcn_prot.keys[0]);
+	if (!key) {
+		key = rcu_dereference(mvmvif->bcn_prot.keys[1]);
+		if (!key)
+			return -1;
+	}
 
 	if (len < key->icv_len + IEEE80211_GMAC_PN_LEN + 2)
 		return -1;
 
-	/*
-	 * See if the key ID matches - if not this may be due to a
-	 * switch and the firmware may erroneously report !MIC_OK.
-	 */
+	/* get the real key ID */
 	keyid = frame[len - key->icv_len - IEEE80211_GMAC_PN_LEN - 2];
-	if (keyid != fwkeyid)
-		return -1;
+	/* and if that's the other key, look it up */
+	if (keyid != key->keyidx) {
+		/*
+		 * shouldn't happen since firmware checked, but be safe
+		 * in case the MIC length is wrong too, for example
+		 */
+		if (keyid != 6 && keyid != 7)
+			return -1;
+		key = rcu_dereference(mvmvif->bcn_prot.keys[keyid - 6]);
+		if (!key)
+			return -1;
+	}
 
 	/* Report status to mac80211 */
 	if (!(status & IWL_RX_MPDU_STATUS_MIC_OK))