| Message ID | 20210828112640.7248-2-paul@crapouillou.net |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Sat, Aug 28, 2021 at 12:26:40PM +0100, Paul Cercueil wrote: > From: Christophe Branchereau <cbranchereau@gmail.com> > > Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 > 24-bit TFT LCD with non-square pixels and a delta-RGB 8-bit interface. > > Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > drivers/gpu/drm/panel/Kconfig | 8 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-auo-a030jtn01.c | 297 ++++++++++++++++++++ > 3 files changed, 306 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-auo-a030jtn01.c > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 0b3784941312..42d42f999266 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -8,6 +8,14 @@ config DRM_PANEL > menu "Display Panels" > depends on DRM && DRM_PANEL > > +config DRM_PANEL_AUO_A030JTN01 > + tristate "AUO A030JTN01" > + depends on OF && SPI > + select REGMAP_SPI > + help > + Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel > + as found in the YLM RS-97 handheld gaming console. > + It seems that these should be alphabetical order. > config DRM_PANEL_ABT_Y030XX067A > tristate "ABT Y030XX067A 320x480 LCD panel" > depends on OF && SPI > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 60c0149fc54a..edf62866e4af 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0 > +obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o > obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.o > diff --git a/drivers/gpu/drm/panel/panel-auo-a030jtn01.c b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c > new file mode 100644 > index 000000000000..804567a59d19 > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c > @@ -0,0 +1,297 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * AU Optronics A030JTN01.0 TFT LCD panel driver > + * > + * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net> > + * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com> Should these be 2021? Argillander > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/media-bus-format.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > +#include <linux/spi/spi.h> > + > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > + > +struct a030jtn01_info { > + const struct drm_display_mode *display_modes; > + unsigned int num_modes; > + u16 width_mm, height_mm; > + u32 bus_format, bus_flags; > +}; > + > +struct a030jtn01 { > + struct drm_panel panel; > + struct spi_device *spi; > + struct regmap *map; > + > + const struct a030jtn01_info *panel_info; > + > + struct regulator *supply; > + struct gpio_desc *reset_gpio; > +}; > + > +static inline struct a030jtn01 *to_a030jtn01(struct drm_panel *panel) > +{ > + return container_of(panel, struct a030jtn01, panel); > +} > + > +static int a030jtn01_prepare(struct drm_panel *panel) > +{ > + struct a030jtn01 *priv = to_a030jtn01(panel); > + struct device *dev = &priv->spi->dev; > + int err; > + > + err = regulator_enable(priv->supply); > + if (err) { > + dev_err(dev, "Failed to enable power supply: %d\n", err); > + return err; > + } > + > + usleep_range(1000, 8000); > + > + /* Reset the chip */ > + gpiod_set_value_cansleep(priv->reset_gpio, 1); > + usleep_range(100, 8000); > + gpiod_set_value_cansleep(priv->reset_gpio, 0); > + usleep_range(2000, 8000); > + > + /* > + * No idea why two writes are needed. If this write is commented, > + * the colors are wrong. Doesn't seem to be timing-related, since > + * a msleep(200) doesn't fix it. > + */ > + regmap_write(priv->map, 0x06, 0x00); > + > + /* Use (24 + 6) == 0x1e as the vertical back porch */ > + err = regmap_write(priv->map, 0x06, 0x1e); > + if (err) > + goto err_disable_regulator; > + > + /* Use (42 + 30) * 3 == 0xd8 as the horizontal back porch */ > + err = regmap_write(priv->map, 0x07, 0xd8); > + if (err) > + goto err_disable_regulator; > + > + regmap_write(priv->map, 0x05, 0x74); > + > + return 0; > + > +err_disable_regulator: > + gpiod_set_value_cansleep(priv->reset_gpio, 1); > + regulator_disable(priv->supply); > + return err; > +} > + > +static int a030jtn01_unprepare(struct drm_panel *panel) > +{ > + struct a030jtn01 *priv = to_a030jtn01(panel); > + > + gpiod_set_value_cansleep(priv->reset_gpio, 1); > + regulator_disable(priv->supply); > + > + return 0; > +} > + > +static int a030jtn01_enable(struct drm_panel *panel) > +{ > + struct a030jtn01 *priv = to_a030jtn01(panel); > + int ret; > + > + ret = regmap_write(priv->map, 0x05, 0x75); > + if (ret) > + return ret; > + > + /* Wait for the picture to be stable */ > + if (panel->backlight) > + msleep(100); > + > + return 0; > +} > + > +static int a030jtn01_disable(struct drm_panel *panel) > +{ > + struct a030jtn01 *priv = to_a030jtn01(panel); > + > + return regmap_write(priv->map, 0x05, 0x74); > +} > + > +static int a030jtn01_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + struct a030jtn01 *priv = to_a030jtn01(panel); > + const struct a030jtn01_info *panel_info = priv->panel_info; > + struct drm_display_mode *mode; > + unsigned int i; > + > + for (i = 0; i < panel_info->num_modes; i++) { > + mode = drm_mode_duplicate(connector->dev, > + &panel_info->display_modes[i]); > + if (!mode) > + return -ENOMEM; > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER; > + if (panel_info->num_modes == 1) > + mode->type |= DRM_MODE_TYPE_PREFERRED; > + > + drm_mode_probed_add(connector, mode); > + } > + > + connector->display_info.bpc = 8; > + connector->display_info.width_mm = panel_info->width_mm; > + connector->display_info.height_mm = panel_info->height_mm; > + > + drm_display_info_set_bus_formats(&connector->display_info, > + &panel_info->bus_format, 1); > + connector->display_info.bus_flags = panel_info->bus_flags; > + > + return panel_info->num_modes; > +} > + > +static const struct drm_panel_funcs a030jtn01_funcs = { > + .prepare = a030jtn01_prepare, > + .unprepare = a030jtn01_unprepare, > + .enable = a030jtn01_enable, > + .disable = a030jtn01_disable, > + .get_modes = a030jtn01_get_modes, > +}; > + > +static bool a030jtn01_has_reg(struct device *dev, unsigned int reg) > +{ > + static const u32 a030jtn01_regs_mask = 0x001823f1fb; > + > + return a030jtn01_regs_mask & BIT(reg); > +}; > + > +static const struct regmap_config a030jtn01_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .read_flag_mask = 0x40, > + .max_register = 0x1c, > + .readable_reg = a030jtn01_has_reg, > + .writeable_reg = a030jtn01_has_reg, > +}; > + > +static int a030jtn01_probe(struct spi_device *spi) > +{ > + struct device *dev = &spi->dev; > + struct a030jtn01 *priv; > + int err; > + > + spi->mode |= SPI_MODE_3 | SPI_3WIRE; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->spi = spi; > + spi_set_drvdata(spi, priv); > + > + priv->map = devm_regmap_init_spi(spi, &a030jtn01_regmap_config); > + if (IS_ERR(priv->map)) { > + dev_err(dev, "Unable to init regmap\n"); > + return PTR_ERR(priv->map); > + } > + > + priv->panel_info = of_device_get_match_data(dev); > + if (!priv->panel_info) > + return -EINVAL; > + > + priv->supply = devm_regulator_get(dev, "power"); > + if (IS_ERR(priv->supply)) { > + dev_err(dev, "Failed to get power supply\n"); > + return PTR_ERR(priv->supply); > + } > + > + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(priv->reset_gpio)) { > + dev_err(dev, "Failed to get reset GPIO\n"); > + return PTR_ERR(priv->reset_gpio); > + } > + > + drm_panel_init(&priv->panel, dev, &a030jtn01_funcs, > + DRM_MODE_CONNECTOR_DPI); > + > + err = drm_panel_of_backlight(&priv->panel); > + if (err) > + return err; > + > + drm_panel_add(&priv->panel); > + > + return 0; > +} > + > +static int a030jtn01_remove(struct spi_device *spi) > +{ > + struct a030jtn01 *priv = spi_get_drvdata(spi); > + > + drm_panel_remove(&priv->panel); > + drm_panel_disable(&priv->panel); > + drm_panel_unprepare(&priv->panel); > + > + return 0; > +} > + > +static const struct drm_display_mode a030jtn01_modes[] = { > + { /* 60 Hz */ > + .clock = 14400, > + .hdisplay = 320, > + .hsync_start = 320 + 8, > + .hsync_end = 320 + 8 + 42, > + .htotal = 320 + 8 + 42 + 30, > + .vdisplay = 480, > + .vsync_start = 480 + 90, > + .vsync_end = 480 + 90 + 24, > + .vtotal = 480 + 90 + 24 + 6, > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, > + }, > + { /* 50 Hz */ > + .clock = 12000, > + .hdisplay = 320, > + .hsync_start = 320 + 8, > + .hsync_end = 320 + 8 + 42, > + .htotal = 320 + 8 + 42 + 30, > + .vdisplay = 480, > + .vsync_start = 480 + 90, > + .vsync_end = 480 + 90 + 24, > + .vtotal = 480 + 90 + 24 + 6, > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, > + }, > +}; > + > +static const struct a030jtn01_info a030jtn01_info = { > + .display_modes = a030jtn01_modes, > + .num_modes = ARRAY_SIZE(a030jtn01_modes), > + .width_mm = 70, > + .height_mm = 51, > + .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA, > + .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, > +}; > + > +static const struct of_device_id a030jtn01_of_match[] = { > + { .compatible = "auo,a030jtn01", .data = &a030jtn01_info }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, a030jtn01_of_match); > + > +static struct spi_driver a030jtn01_driver = { > + .driver = { > + .name = "auo-a030jtn01", > + .of_match_table = a030jtn01_of_match, > + }, > + .probe = a030jtn01_probe, > + .remove = a030jtn01_remove, > +}; > +module_spi_driver(a030jtn01_driver); > + > +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); > +MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); > +MODULE_LICENSE("GPL v2"); > -- > 2.33.0 >
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 0b3784941312..42d42f999266 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -8,6 +8,14 @@ config DRM_PANEL menu "Display Panels" depends on DRM && DRM_PANEL +config DRM_PANEL_AUO_A030JTN01 + tristate "AUO A030JTN01" + depends on OF && SPI + select REGMAP_SPI + help + Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel + as found in the YLM RS-97 handheld gaming console. + config DRM_PANEL_ABT_Y030XX067A tristate "ABT Y030XX067A 320x480 LCD panel" depends on OF && SPI diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 60c0149fc54a..edf62866e4af 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.o diff --git a/drivers/gpu/drm/panel/panel-auo-a030jtn01.c b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c new file mode 100644 index 000000000000..804567a59d19 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-auo-a030jtn01.c @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AU Optronics A030JTN01.0 TFT LCD panel driver + * + * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net> + * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com> + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +struct a030jtn01_info { + const struct drm_display_mode *display_modes; + unsigned int num_modes; + u16 width_mm, height_mm; + u32 bus_format, bus_flags; +}; + +struct a030jtn01 { + struct drm_panel panel; + struct spi_device *spi; + struct regmap *map; + + const struct a030jtn01_info *panel_info; + + struct regulator *supply; + struct gpio_desc *reset_gpio; +}; + +static inline struct a030jtn01 *to_a030jtn01(struct drm_panel *panel) +{ + return container_of(panel, struct a030jtn01, panel); +} + +static int a030jtn01_prepare(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + struct device *dev = &priv->spi->dev; + int err; + + err = regulator_enable(priv->supply); + if (err) { + dev_err(dev, "Failed to enable power supply: %d\n", err); + return err; + } + + usleep_range(1000, 8000); + + /* Reset the chip */ + gpiod_set_value_cansleep(priv->reset_gpio, 1); + usleep_range(100, 8000); + gpiod_set_value_cansleep(priv->reset_gpio, 0); + usleep_range(2000, 8000); + + /* + * No idea why two writes are needed. If this write is commented, + * the colors are wrong. Doesn't seem to be timing-related, since + * a msleep(200) doesn't fix it. + */ + regmap_write(priv->map, 0x06, 0x00); + + /* Use (24 + 6) == 0x1e as the vertical back porch */ + err = regmap_write(priv->map, 0x06, 0x1e); + if (err) + goto err_disable_regulator; + + /* Use (42 + 30) * 3 == 0xd8 as the horizontal back porch */ + err = regmap_write(priv->map, 0x07, 0xd8); + if (err) + goto err_disable_regulator; + + regmap_write(priv->map, 0x05, 0x74); + + return 0; + +err_disable_regulator: + gpiod_set_value_cansleep(priv->reset_gpio, 1); + regulator_disable(priv->supply); + return err; +} + +static int a030jtn01_unprepare(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + + gpiod_set_value_cansleep(priv->reset_gpio, 1); + regulator_disable(priv->supply); + + return 0; +} + +static int a030jtn01_enable(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + int ret; + + ret = regmap_write(priv->map, 0x05, 0x75); + if (ret) + return ret; + + /* Wait for the picture to be stable */ + if (panel->backlight) + msleep(100); + + return 0; +} + +static int a030jtn01_disable(struct drm_panel *panel) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + + return regmap_write(priv->map, 0x05, 0x74); +} + +static int a030jtn01_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct a030jtn01 *priv = to_a030jtn01(panel); + const struct a030jtn01_info *panel_info = priv->panel_info; + struct drm_display_mode *mode; + unsigned int i; + + for (i = 0; i < panel_info->num_modes; i++) { + mode = drm_mode_duplicate(connector->dev, + &panel_info->display_modes[i]); + if (!mode) + return -ENOMEM; + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER; + if (panel_info->num_modes == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + } + + connector->display_info.bpc = 8; + connector->display_info.width_mm = panel_info->width_mm; + connector->display_info.height_mm = panel_info->height_mm; + + drm_display_info_set_bus_formats(&connector->display_info, + &panel_info->bus_format, 1); + connector->display_info.bus_flags = panel_info->bus_flags; + + return panel_info->num_modes; +} + +static const struct drm_panel_funcs a030jtn01_funcs = { + .prepare = a030jtn01_prepare, + .unprepare = a030jtn01_unprepare, + .enable = a030jtn01_enable, + .disable = a030jtn01_disable, + .get_modes = a030jtn01_get_modes, +}; + +static bool a030jtn01_has_reg(struct device *dev, unsigned int reg) +{ + static const u32 a030jtn01_regs_mask = 0x001823f1fb; + + return a030jtn01_regs_mask & BIT(reg); +}; + +static const struct regmap_config a030jtn01_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = 0x40, + .max_register = 0x1c, + .readable_reg = a030jtn01_has_reg, + .writeable_reg = a030jtn01_has_reg, +}; + +static int a030jtn01_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct a030jtn01 *priv; + int err; + + spi->mode |= SPI_MODE_3 | SPI_3WIRE; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->spi = spi; + spi_set_drvdata(spi, priv); + + priv->map = devm_regmap_init_spi(spi, &a030jtn01_regmap_config); + if (IS_ERR(priv->map)) { + dev_err(dev, "Unable to init regmap\n"); + return PTR_ERR(priv->map); + } + + priv->panel_info = of_device_get_match_data(dev); + if (!priv->panel_info) + return -EINVAL; + + priv->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(priv->supply)) { + dev_err(dev, "Failed to get power supply\n"); + return PTR_ERR(priv->supply); + } + + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset_gpio)) { + dev_err(dev, "Failed to get reset GPIO\n"); + return PTR_ERR(priv->reset_gpio); + } + + drm_panel_init(&priv->panel, dev, &a030jtn01_funcs, + DRM_MODE_CONNECTOR_DPI); + + err = drm_panel_of_backlight(&priv->panel); + if (err) + return err; + + drm_panel_add(&priv->panel); + + return 0; +} + +static int a030jtn01_remove(struct spi_device *spi) +{ + struct a030jtn01 *priv = spi_get_drvdata(spi); + + drm_panel_remove(&priv->panel); + drm_panel_disable(&priv->panel); + drm_panel_unprepare(&priv->panel); + + return 0; +} + +static const struct drm_display_mode a030jtn01_modes[] = { + { /* 60 Hz */ + .clock = 14400, + .hdisplay = 320, + .hsync_start = 320 + 8, + .hsync_end = 320 + 8 + 42, + .htotal = 320 + 8 + 42 + 30, + .vdisplay = 480, + .vsync_start = 480 + 90, + .vsync_end = 480 + 90 + 24, + .vtotal = 480 + 90 + 24 + 6, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, + { /* 50 Hz */ + .clock = 12000, + .hdisplay = 320, + .hsync_start = 320 + 8, + .hsync_end = 320 + 8 + 42, + .htotal = 320 + 8 + 42 + 30, + .vdisplay = 480, + .vsync_start = 480 + 90, + .vsync_end = 480 + 90 + 24, + .vtotal = 480 + 90 + 24 + 6, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + }, +}; + +static const struct a030jtn01_info a030jtn01_info = { + .display_modes = a030jtn01_modes, + .num_modes = ARRAY_SIZE(a030jtn01_modes), + .width_mm = 70, + .height_mm = 51, + .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA, + .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, +}; + +static const struct of_device_id a030jtn01_of_match[] = { + { .compatible = "auo,a030jtn01", .data = &a030jtn01_info }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, a030jtn01_of_match); + +static struct spi_driver a030jtn01_driver = { + .driver = { + .name = "auo-a030jtn01", + .of_match_table = a030jtn01_of_match, + }, + .probe = a030jtn01_probe, + .remove = a030jtn01_remove, +}; +module_spi_driver(a030jtn01_driver); + +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); +MODULE_LICENSE("GPL v2");