@@ -16,19 +16,17 @@
*/
#include <linux/kernel.h>
-#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/devcoredump.h>
#include <linux/device.h>
-#include <linux/gpio/consumer.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
+#include <linux/pwrseq/consumer.h>
#include <linux/serdev.h>
#include <linux/mutex.h>
#include <asm/unaligned.h>
@@ -54,9 +52,6 @@
(MEMDUMP_TIMEOUT_MS + FW_DOWNLOAD_TIMEOUT_MS)
#define FW_DOWNLOAD_TIMEOUT_MS 3000
-/* susclk rate */
-#define SUSCLK_RATE_32KHZ 32768
-
/* Controller debug log header */
#define QCA_DEBUG_HANDLE 0x2EDC
@@ -200,28 +195,17 @@ struct qca_vreg {
struct qca_device_data {
enum qca_btsoc_type soc_type;
- struct qca_vreg *vregs;
- size_t num_vregs;
uint32_t capabilities;
};
/*
* Platform data for the QCA Bluetooth power driver.
*/
-struct qca_power {
- struct device *dev;
- struct regulator_bulk_data *vreg_bulk;
- int num_vregs;
- bool vregs_on;
-};
-
struct qca_serdev {
struct hci_uart serdev_hu;
- struct gpio_desc *bt_en;
- struct gpio_desc *sw_ctrl;
- struct clk *susclk;
enum qca_btsoc_type btsoc_type;
- struct qca_power *bt_power;
+ struct pwrseq *pwrseq;
+ bool vregs_on;
u32 init_speed;
u32 oper_speed;
const char *firmware_name;
@@ -1596,13 +1580,12 @@ static int qca_regulator_init(struct hci_uart *hu)
enum qca_btsoc_type soc_type = qca_soc_type(hu);
struct qca_serdev *qcadev;
int ret;
- bool sw_ctrl_state;
/* Check for vregs status, may be hci down has turned
* off the voltage regulator.
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (!qcadev->bt_power->vregs_on) {
+ if (!qcadev->vregs_on) {
serdev_device_close(hu->serdev);
ret = qca_regulator_enable(qcadev);
if (ret)
@@ -1623,19 +1606,9 @@ static int qca_regulator_init(struct hci_uart *hu)
return ret;
}
- /* For wcn6750 need to enable gpio bt_en */
- if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
- msleep(50);
- gpiod_set_value_cansleep(qcadev->bt_en, 1);
- msleep(50);
- if (qcadev->sw_ctrl) {
- sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
- bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
- }
- }
-
- qca_set_speed(hu, QCA_INIT_SPEED);
+ if (qca_is_wcn399x(soc_type) ||
+ qca_is_wcn6750(soc_type))
+ qca_set_speed(hu, QCA_INIT_SPEED);
if (qca_is_wcn399x(soc_type)) {
ret = qca_send_power_pulse(hu, true);
@@ -1655,7 +1628,9 @@ static int qca_regulator_init(struct hci_uart *hu)
return ret;
}
- hci_uart_set_flow_control(hu, false);
+ if (qca_is_wcn399x(soc_type) ||
+ qca_is_wcn6750(soc_type))
+ hci_uart_set_flow_control(hu, false);
return 0;
}
@@ -1663,8 +1638,6 @@ static int qca_regulator_init(struct hci_uart *hu)
static int qca_power_on(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
- enum qca_btsoc_type soc_type = qca_soc_type(hu);
- struct qca_serdev *qcadev;
struct qca_data *qca = hu->priv;
int ret = 0;
@@ -1674,17 +1647,7 @@ static int qca_power_on(struct hci_dev *hdev)
if (!hu->serdev)
return 0;
- if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type)) {
- ret = qca_regulator_init(hu);
- } else {
- qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 1);
- /* Controller needs time to bootup. */
- msleep(150);
- }
- }
+ ret = qca_regulator_init(hu);
clear_bit(QCA_BT_OFF, &qca->flags);
return ret;
@@ -1820,57 +1783,23 @@ static const struct hci_uart_proto qca_proto = {
static const struct qca_device_data qca_soc_data_wcn3990 = {
.soc_type = QCA_WCN3990,
- .vregs = (struct qca_vreg []) {
- { "vddio", 15000 },
- { "vddxo", 80000 },
- { "vddrf", 300000 },
- { "vddch0", 450000 },
- },
- .num_vregs = 4,
};
static const struct qca_device_data qca_soc_data_wcn3991 = {
.soc_type = QCA_WCN3991,
- .vregs = (struct qca_vreg []) {
- { "vddio", 15000 },
- { "vddxo", 80000 },
- { "vddrf", 300000 },
- { "vddch0", 450000 },
- },
- .num_vregs = 4,
.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
};
static const struct qca_device_data qca_soc_data_wcn3998 = {
.soc_type = QCA_WCN3998,
- .vregs = (struct qca_vreg []) {
- { "vddio", 10000 },
- { "vddxo", 80000 },
- { "vddrf", 300000 },
- { "vddch0", 450000 },
- },
- .num_vregs = 4,
};
static const struct qca_device_data qca_soc_data_qca6390 = {
.soc_type = QCA_QCA6390,
- .num_vregs = 0,
};
static const struct qca_device_data qca_soc_data_wcn6750 = {
.soc_type = QCA_WCN6750,
- .vregs = (struct qca_vreg []) {
- { "vddio", 5000 },
- { "vddaon", 26000 },
- { "vddbtcxmx", 126000 },
- { "vddrfacmn", 12500 },
- { "vddrfa0p8", 102000 },
- { "vddrfa1p7", 302000 },
- { "vddrfa1p2", 257000 },
- { "vddrfa2p2", 1700000 },
- { "vddasd", 200 },
- },
- .num_vregs = 9,
.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
};
@@ -1880,7 +1809,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
struct qca_data *qca = hu->priv;
unsigned long flags;
enum qca_btsoc_type soc_type = qca_soc_type(hu);
- bool sw_ctrl_state;
/* From this point we go into power off state. But serial port is
* still open, stop queueing the IBS data and flush all the buffered
@@ -1902,19 +1830,10 @@ static void qca_power_shutdown(struct hci_uart *hu)
if (qca_is_wcn399x(soc_type)) {
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
- qca_regulator_disable(qcadev);
- } else if (soc_type == QCA_WCN6750) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
- msleep(100);
- qca_regulator_disable(qcadev);
- if (qcadev->sw_ctrl) {
- sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
- bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
- }
- } else if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
+ qca_regulator_disable(qcadev);
+
set_bit(QCA_BT_OFF, &qca->flags);
}
@@ -1940,75 +1859,34 @@ static int qca_power_off(struct hci_dev *hdev)
static int qca_regulator_enable(struct qca_serdev *qcadev)
{
- struct qca_power *power = qcadev->bt_power;
int ret;
/* Already enabled */
- if (power->vregs_on)
+ if (qcadev->vregs_on)
return 0;
- BT_DBG("enabling %d regulators)", power->num_vregs);
+ BT_DBG("enabling regulators)");
- ret = regulator_bulk_enable(power->num_vregs, power->vreg_bulk);
+ ret = pwrseq_full_power_on(qcadev->pwrseq);
if (ret)
return ret;
- power->vregs_on = true;
-
- ret = clk_prepare_enable(qcadev->susclk);
- if (ret)
- qca_regulator_disable(qcadev);
+ qcadev->vregs_on = true;
return ret;
}
static void qca_regulator_disable(struct qca_serdev *qcadev)
{
- struct qca_power *power;
-
if (!qcadev)
return;
- power = qcadev->bt_power;
-
/* Already disabled? */
- if (!power->vregs_on)
+ if (!qcadev->vregs_on)
return;
- regulator_bulk_disable(power->num_vregs, power->vreg_bulk);
- power->vregs_on = false;
-
- clk_disable_unprepare(qcadev->susclk);
-}
-
-static int qca_init_regulators(struct qca_power *qca,
- const struct qca_vreg *vregs, size_t num_vregs)
-{
- struct regulator_bulk_data *bulk;
- int ret;
- int i;
-
- bulk = devm_kcalloc(qca->dev, num_vregs, sizeof(*bulk), GFP_KERNEL);
- if (!bulk)
- return -ENOMEM;
-
- for (i = 0; i < num_vregs; i++)
- bulk[i].supply = vregs[i].name;
-
- ret = devm_regulator_bulk_get(qca->dev, num_vregs, bulk);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < num_vregs; i++) {
- ret = regulator_set_load(bulk[i].consumer, vregs[i].load_uA);
- if (ret)
- return ret;
- }
-
- qca->vreg_bulk = bulk;
- qca->num_vregs = num_vregs;
-
- return 0;
+ pwrseq_power_off(qcadev->pwrseq);
+ qcadev->vregs_on = false;
}
static int qca_serdev_probe(struct serdev_device *serdev)
@@ -2017,7 +1895,6 @@ static int qca_serdev_probe(struct serdev_device *serdev)
struct hci_dev *hdev;
const struct qca_device_data *data;
int err;
- bool power_ctrl_enabled = true;
qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
if (!qcadev)
@@ -2033,89 +1910,29 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->oper_speed)
BT_DBG("UART will pick default operating speed");
- if (data &&
- (qca_is_wcn399x(data->soc_type) ||
- qca_is_wcn6750(data->soc_type))) {
- qcadev->btsoc_type = data->soc_type;
- qcadev->bt_power = devm_kzalloc(&serdev->dev,
- sizeof(struct qca_power),
- GFP_KERNEL);
- if (!qcadev->bt_power)
- return -ENOMEM;
-
- qcadev->bt_power->dev = &serdev->dev;
- err = qca_init_regulators(qcadev->bt_power, data->vregs,
- data->num_vregs);
- if (err) {
- BT_ERR("Failed to init regulators:%d", err);
- return err;
- }
-
- qcadev->bt_power->vregs_on = false;
-
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
- dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
- power_ctrl_enabled = false;
- }
- qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
- GPIOD_IN);
- if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
- dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
-
- qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (IS_ERR(qcadev->susclk)) {
- dev_err(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
-
- err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
- if (err) {
- BT_ERR("wcn3990 serdev registration failed");
- return err;
- }
- } else {
- if (data)
- qcadev->btsoc_type = data->soc_type;
- else
- qcadev->btsoc_type = QCA_ROME;
+ if (data)
+ qcadev->btsoc_type = data->soc_type;
+ else
+ qcadev->btsoc_type = QCA_ROME;
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
- dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
- power_ctrl_enabled = false;
- }
+ qcadev->pwrseq = devm_pwrseq_get(&serdev->dev, "bt");
+ if (IS_ERR(qcadev->pwrseq)) {
+ dev_err(&serdev->dev, "failed to acquire pwrseq\n");
+ return PTR_ERR(qcadev->pwrseq);
+ }
+ qcadev->vregs_on = false;
- qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (IS_ERR(qcadev->susclk)) {
- dev_warn(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
- err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
- if (err)
- return err;
-
- err = clk_prepare_enable(qcadev->susclk);
- if (err)
- return err;
-
- err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
- if (err) {
- BT_ERR("Rome serdev registration failed");
- clk_disable_unprepare(qcadev->susclk);
- return err;
- }
+ err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+ if (err) {
+ BT_ERR("wcn3990 serdev registration failed");
+ return err;
}
hdev = qcadev->serdev_hu.hdev;
- if (power_ctrl_enabled) {
- set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
- hdev->shutdown = qca_power_off;
- }
+ set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ hdev->shutdown = qca_power_off;
if (data) {
/* Wideband speech support must be set per driver since it can't
@@ -2135,14 +1952,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
static void qca_serdev_remove(struct serdev_device *serdev)
{
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
- struct qca_power *power = qcadev->bt_power;
if ((qca_is_wcn399x(qcadev->btsoc_type) ||
qca_is_wcn6750(qcadev->btsoc_type)) &&
- power->vregs_on)
+ qcadev->vregs_on)
qca_power_shutdown(&qcadev->serdev_hu);
- else if (qcadev->susclk)
- clk_disable_unprepare(qcadev->susclk);
hci_uart_unregister_device(&qcadev->serdev_hu);
}
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/bluetooth/hci_qca.c | 260 +++++------------------------------- 1 file changed, 37 insertions(+), 223 deletions(-) -- 2.33.0