diff mbox series

[net-next,v4,3/6] vhost/vsock: support MSG_EOR bit processing

Message ID 20210903061541.3187840-1-arseny.krasnov@kaspersky.com
State New
Headers show
Series virtio/vsock: introduce MSG_EOR flag for SEQPACKET | expand

Commit Message

Arseny Krasnov Sept. 3, 2021, 6:15 a.m. UTC
'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present
in packet's header, reset it to 0. Then restore it back if packet
processing wasn't completed. Instead of bool variable for each
flag, bit mask variable was added: it has logical OR of 'MSG_EOR'
and 'MSG_EOM' if needed, to restore flags, this variable is ORed
with flags field of packet.

Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
---
 drivers/vhost/vsock.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

Comments

Stefano Garzarella Sept. 3, 2021, 6:55 a.m. UTC | #1
On Fri, Sep 03, 2021 at 09:15:38AM +0300, Arseny Krasnov wrote:
>'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present
>in packet's header, reset it to 0. Then restore it back if packet
>processing wasn't completed. Instead of bool variable for each
>flag, bit mask variable was added: it has logical OR of 'MSG_EOR'
>and 'MSG_EOM' if needed, to restore flags, this variable is ORed
>with flags field of packet.
>
>Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
>---
> drivers/vhost/vsock.c | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
>diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
>index feaf650affbe..93e8d635e18f 100644
>--- a/drivers/vhost/vsock.c
>+++ b/drivers/vhost/vsock.c
>@@ -114,7 +114,7 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
> 		size_t nbytes;
> 		size_t iov_len, payload_len;
> 		int head;
>-		bool restore_flag = false;
>+		u32 flags_to_restore = 0;
>
> 		spin_lock_bh(&vsock->send_pkt_list_lock);
> 		if (list_empty(&vsock->send_pkt_list)) {
>@@ -179,15 +179,20 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
> 			 * created dynamically and are initialized with header
> 			 * of current packet(except length). But in case of
> 			 * SOCK_SEQPACKET, we also must clear message delimeter
>-			 * bit(VIRTIO_VSOCK_SEQ_EOM). Otherwise, instead of one
>-			 * packet with delimeter(which marks end of message),
>-			 * there will be sequence of packets with delimeter
>-			 * bit set. After initialized header will be copied to
>-			 * rx buffer, this bit will be restored.
>+			 * bit (VIRTIO_VSOCK_SEQ_EOM) and MSG_EOR bit
>+			 * (VIRTIO_VSOCK_SEQ_EOR) if set. Otherwise,
>+			 * there will be sequence of packets with these
>+			 * bits set. After initialized header will be copied to
>+			 * rx buffer, these required bits will be restored.
> 			 */
> 			if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_SEQ_EOM) {
> 				pkt->hdr.flags &= ~cpu_to_le32(VIRTIO_VSOCK_SEQ_EOM);
>-				restore_flag = true;
>+				flags_to_restore |= VIRTIO_VSOCK_SEQ_EOM;
>+
>+				if (le32_to_cpu(pkt->hdr.flags & VIRTIO_VSOCK_SEQ_EOR)) {
>+					pkt->hdr.flags &= ~cpu_to_le32(VIRTIO_VSOCK_SEQ_EOR);
>+					flags_to_restore |= VIRTIO_VSOCK_SEQ_EOR;
>+				}
> 			}
> 		}
>
>@@ -224,8 +229,7 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
> 		 * to send it with the next available buffer.
> 		 */
> 		if (pkt->off < pkt->len) {
>-			if (restore_flag)
>-				pkt->hdr.flags |= cpu_to_le32(VIRTIO_VSOCK_SEQ_EOM);
>+			pkt->hdr.flags |= cpu_to_le32(flags_to_restore);
>
> 			/* We are queueing the same virtio_vsock_pkt to handle
> 			 * the remaining bytes, and we want to deliver it
>-- 
>2.25.1
>

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Arseny Krasnov Sept. 3, 2021, 12:34 p.m. UTC | #2
On 03.09.2021 15:14, Stefano Garzarella wrote:
> On Fri, Sep 03, 2021 at 08:55:39AM +0200, Stefano Garzarella wrote:
>> On Fri, Sep 03, 2021 at 09:15:38AM +0300, Arseny Krasnov wrote:
>>> 'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present
>>> in packet's header, reset it to 0. Then restore it back if packet
>>> processing wasn't completed. Instead of bool variable for each
>>> flag, bit mask variable was added: it has logical OR of 'MSG_EOR'
>>> and 'MSG_EOM' if needed, to restore flags, this variable is ORed
>>> with flags field of packet.
>>>
>>> Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
>>> ---
>>> drivers/vhost/vsock.c | 22 +++++++++++++---------
>>> 1 file changed, 13 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
>>> index feaf650affbe..93e8d635e18f 100644
>>> --- a/drivers/vhost/vsock.c
>>> +++ b/drivers/vhost/vsock.c
>>> @@ -114,7 +114,7 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
>>> 		size_t nbytes;
>>> 		size_t iov_len, payload_len;
>>> 		int head;
>>> -		bool restore_flag = false;
>>> +		u32 flags_to_restore = 0;
>>>
>>> 		spin_lock_bh(&vsock->send_pkt_list_lock);
>>> 		if (list_empty(&vsock->send_pkt_list)) {
>>> @@ -179,15 +179,20 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
>>> 			 * created dynamically and are initialized with header
>>> 			 * of current packet(except length). But in case of
>>> 			 * SOCK_SEQPACKET, we also must clear message delimeter
>>> -			 * bit(VIRTIO_VSOCK_SEQ_EOM). Otherwise, instead of one
>>> -			 * packet with delimeter(which marks end of message),
>>> -			 * there will be sequence of packets with delimeter
>>> -			 * bit set. After initialized header will be copied to
>>> -			 * rx buffer, this bit will be restored.
>>> +			 * bit (VIRTIO_VSOCK_SEQ_EOM) and MSG_EOR bit
>>> +			 * (VIRTIO_VSOCK_SEQ_EOR) if set. Otherwise,
>>> +			 * there will be sequence of packets with these
>>> +			 * bits set. After initialized header will be copied to
>>> +			 * rx buffer, these required bits will be restored.
>>> 			 */
>>> 			if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_SEQ_EOM) {
>>> 				pkt->hdr.flags &= ~cpu_to_le32(VIRTIO_VSOCK_SEQ_EOM);
>>> -				restore_flag = true;
>>> +				flags_to_restore |= VIRTIO_VSOCK_SEQ_EOM;
>>> +
>>> +				if (le32_to_cpu(pkt->hdr.flags & VIRTIO_VSOCK_SEQ_EOR)) {
>                                                                ^
> Ooops, le32_to_cpu() should close before bitwise and operator.
> I missed this, but kernel test robot discovered :-)
Sorry ><
>
>>> +					pkt->hdr.flags &= ~cpu_to_le32(VIRTIO_VSOCK_SEQ_EOR);
>>> +					flags_to_restore |= VIRTIO_VSOCK_SEQ_EOR;
>>> +				}
>>> 			}
>>> 		}
>>>
>>> @@ -224,8 +229,7 @@ vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
>>> 		 * to send it with the next available buffer.
>>> 		 */
>>> 		if (pkt->off < pkt->len) {
>>> -			if (restore_flag)
>>> -				pkt->hdr.flags |= cpu_to_le32(VIRTIO_VSOCK_SEQ_EOM);
>>> +			pkt->hdr.flags |= cpu_to_le32(flags_to_restore);
>>>
>>> 			/* We are queueing the same virtio_vsock_pkt to handle
>>> 			 * the remaining bytes, and we want to deliver it
>>> -- 2.25.1
>>>
>> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
> NACK
>
> Please resend fixing the issue.
Done, v5 is sent
>
> Stefano
>
>
diff mbox series

Patch

diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index feaf650affbe..93e8d635e18f 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -114,7 +114,7 @@  vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
 		size_t nbytes;
 		size_t iov_len, payload_len;
 		int head;
-		bool restore_flag = false;
+		u32 flags_to_restore = 0;
 
 		spin_lock_bh(&vsock->send_pkt_list_lock);
 		if (list_empty(&vsock->send_pkt_list)) {
@@ -179,15 +179,20 @@  vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
 			 * created dynamically and are initialized with header
 			 * of current packet(except length). But in case of
 			 * SOCK_SEQPACKET, we also must clear message delimeter
-			 * bit(VIRTIO_VSOCK_SEQ_EOM). Otherwise, instead of one
-			 * packet with delimeter(which marks end of message),
-			 * there will be sequence of packets with delimeter
-			 * bit set. After initialized header will be copied to
-			 * rx buffer, this bit will be restored.
+			 * bit (VIRTIO_VSOCK_SEQ_EOM) and MSG_EOR bit
+			 * (VIRTIO_VSOCK_SEQ_EOR) if set. Otherwise,
+			 * there will be sequence of packets with these
+			 * bits set. After initialized header will be copied to
+			 * rx buffer, these required bits will be restored.
 			 */
 			if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_SEQ_EOM) {
 				pkt->hdr.flags &= ~cpu_to_le32(VIRTIO_VSOCK_SEQ_EOM);
-				restore_flag = true;
+				flags_to_restore |= VIRTIO_VSOCK_SEQ_EOM;
+
+				if (le32_to_cpu(pkt->hdr.flags & VIRTIO_VSOCK_SEQ_EOR)) {
+					pkt->hdr.flags &= ~cpu_to_le32(VIRTIO_VSOCK_SEQ_EOR);
+					flags_to_restore |= VIRTIO_VSOCK_SEQ_EOR;
+				}
 			}
 		}
 
@@ -224,8 +229,7 @@  vhost_transport_do_send_pkt(struct vhost_vsock *vsock,
 		 * to send it with the next available buffer.
 		 */
 		if (pkt->off < pkt->len) {
-			if (restore_flag)
-				pkt->hdr.flags |= cpu_to_le32(VIRTIO_VSOCK_SEQ_EOM);
+			pkt->hdr.flags |= cpu_to_le32(flags_to_restore);
 
 			/* We are queueing the same virtio_vsock_pkt to handle
 			 * the remaining bytes, and we want to deliver it