| Message ID | 1436186996-22528-3-git-send-email-eric.auger@linaro.org |
|---|---|
| State | New |
| Headers | show |
On 07/07/2015 03:41 PM, Andrew Jones wrote: > On Mon, Jul 06, 2015 at 02:49:56PM +0200, Eric Auger wrote: >> On halt, the guest is forced to exit and prevented from being >> re-entered. This is synchronous. >> >> Those two operations will be needed for IRQ forwarding setting. >> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> RFC v1 -> v2: >> - add __maybe_unused >> >> RFC: >> - rename the function and this latter becomes static >> - remove __KVM_HAVE_ARCH_HALT_GUEST >> >> v4 -> v5: add arm64 support >> - also defines __KVM_HAVE_ARCH_HALT_GUEST for arm64 >> - add pause field >> --- >> arch/arm/include/asm/kvm_host.h | 3 +++ >> arch/arm/kvm/arm.c | 35 ++++++++++++++++++++++++++++++++--- >> arch/arm64/include/asm/kvm_host.h | 3 +++ >> 3 files changed, 38 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h >> index 304004d..899ae27 100644 >> --- a/arch/arm/include/asm/kvm_host.h >> +++ b/arch/arm/include/asm/kvm_host.h >> @@ -132,6 +132,9 @@ struct kvm_vcpu_arch { >> /* vcpu power-off state */ >> bool power_off; >> >> + /* Don't run the guest */ >> + bool pause; >> + >> /* IO related fields */ >> struct kvm_decode mmio_decode; >> >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index 7537e68..46d4ef6 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c >> @@ -471,11 +471,39 @@ bool kvm_arch_intc_initialized(struct kvm *kvm) >> return vgic_initialized(kvm); >> } >> >> +static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused; >> +static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused; >> + >> +static void kvm_arm_halt_guest(struct kvm *kvm) >> +{ >> + int i; >> + struct kvm_vcpu *vcpu; >> + >> + kvm_for_each_vcpu(i, vcpu, kvm) >> + vcpu->arch.pause = true; >> + force_vm_exit(cpu_all_mask); >> +} >> + >> +static void kvm_arm_resume_guest(struct kvm *kvm) >> +{ >> + int i; >> + struct kvm_vcpu *vcpu; >> + >> + kvm_for_each_vcpu(i, vcpu, kvm) { >> + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); >> + >> + vcpu->arch.pause = false; >> + wake_up_interruptible(wq); >> + } >> +} >> + >> + >> static void vcpu_pause(struct kvm_vcpu *vcpu) >> { >> wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); >> >> - wait_event_interruptible(*wq, !vcpu->arch.power_off); >> + wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && >> + (!vcpu->arch.pause))); >> } >> >> static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) >> @@ -525,7 +553,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> >> update_vttbr(vcpu->kvm); >> >> - if (vcpu->arch.power_off) >> + if (vcpu->arch.power_off || vcpu->arch.pause) >> vcpu_pause(vcpu); >> >> /* >> @@ -551,7 +579,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> run->exit_reason = KVM_EXIT_INTR; >> } >> >> - if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { >> + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || >> + vcpu->arch.pause) { >> local_irq_enable(); >> preempt_enable(); >> kvm_vgic_sync_hwstate(vcpu); >> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h >> index 009da6b..69e3785 100644 >> --- a/arch/arm64/include/asm/kvm_host.h >> +++ b/arch/arm64/include/asm/kvm_host.h >> @@ -125,6 +125,9 @@ struct kvm_vcpu_arch { >> /* vcpu power-off state */ >> bool power_off; >> >> + /* Don't run the guest */ >> + bool pause; >> + >> /* IO related fields */ >> struct kvm_decode mmio_decode; > > So in the last patch, for cleanliness, maybe it would be better to > change the pause reference to a power_off reference in > kvm_arch_vcpu_ioctl_set_mpstate, and keep removing it. Or, maybe the > patch wouldn't look too bad if we just squashed this one into the > last one? yeah I need to think again about the patch structure and/or maybe adopt the lazy approach, putting both together. Thanks again Eric > > drew >
On Mon, Jul 06, 2015 at 02:49:56PM +0200, Eric Auger wrote: > On halt, the guest is forced to exit and prevented from being > re-entered. This is synchronous. > > Those two operations will be needed for IRQ forwarding setting. > > Signed-off-by: Eric Auger <eric.auger@linaro.org> > > --- > RFC v1 -> v2: > - add __maybe_unused > > RFC: > - rename the function and this latter becomes static > - remove __KVM_HAVE_ARCH_HALT_GUEST > > v4 -> v5: add arm64 support > - also defines __KVM_HAVE_ARCH_HALT_GUEST for arm64 > - add pause field > --- > arch/arm/include/asm/kvm_host.h | 3 +++ > arch/arm/kvm/arm.c | 35 ++++++++++++++++++++++++++++++++--- > arch/arm64/include/asm/kvm_host.h | 3 +++ > 3 files changed, 38 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h > index 304004d..899ae27 100644 > --- a/arch/arm/include/asm/kvm_host.h > +++ b/arch/arm/include/asm/kvm_host.h > @@ -132,6 +132,9 @@ struct kvm_vcpu_arch { > /* vcpu power-off state */ > bool power_off; > > + /* Don't run the guest */ > + bool pause; > + > /* IO related fields */ > struct kvm_decode mmio_decode; > > diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c > index 7537e68..46d4ef6 100644 > --- a/arch/arm/kvm/arm.c > +++ b/arch/arm/kvm/arm.c > @@ -471,11 +471,39 @@ bool kvm_arch_intc_initialized(struct kvm *kvm) > return vgic_initialized(kvm); > } > > +static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused; > +static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused; > + > +static void kvm_arm_halt_guest(struct kvm *kvm) > +{ > + int i; > + struct kvm_vcpu *vcpu; > + > + kvm_for_each_vcpu(i, vcpu, kvm) > + vcpu->arch.pause = true; > + force_vm_exit(cpu_all_mask); > +} > + > +static void kvm_arm_resume_guest(struct kvm *kvm) > +{ > + int i; > + struct kvm_vcpu *vcpu; > + > + kvm_for_each_vcpu(i, vcpu, kvm) { > + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); > + > + vcpu->arch.pause = false; > + wake_up_interruptible(wq); > + } > +} > + > + > static void vcpu_pause(struct kvm_vcpu *vcpu) > { > wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); > > - wait_event_interruptible(*wq, !vcpu->arch.power_off); > + wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && > + (!vcpu->arch.pause))); > } > > static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) > @@ -525,7 +553,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > > update_vttbr(vcpu->kvm); > > - if (vcpu->arch.power_off) > + if (vcpu->arch.power_off || vcpu->arch.pause) > vcpu_pause(vcpu); These two changes really make me feel like kvm_arch_vcpu_runnable() should be changed to check for both flags and all thes eplaces should check for runnable instead. To make the runnable function more robust, perhaps it should check: 1. The vcpu is neither paused nor powered off 2. The vcpu is not in a WFI state (vcpu->arch.wfi_request) OR there are pending interrupts (the current check). Then the logic would fit the name of the function, instead of being a specific check only called through handle_wfx. > > /* > @@ -551,7 +579,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) > run->exit_reason = KVM_EXIT_INTR; > } > > - if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { > + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || > + vcpu->arch.pause) { so why do we need to re-check the pause flag, but not the power_off flag? That is non-trivial for sure, so if it's correct, deserves a comment. Also see my comment on the last patch. > local_irq_enable(); > preempt_enable(); > kvm_vgic_sync_hwstate(vcpu); > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h > index 009da6b..69e3785 100644 > --- a/arch/arm64/include/asm/kvm_host.h > +++ b/arch/arm64/include/asm/kvm_host.h > @@ -125,6 +125,9 @@ struct kvm_vcpu_arch { > /* vcpu power-off state */ > bool power_off; > > + /* Don't run the guest */ Probably need to be more clear about this being an implementation requirement rather than being guest visible or related to any architectural concept. > + bool pause; > + > /* IO related fields */ > struct kvm_decode mmio_decode; > > -- > 1.9.1 > Thanks, -Christoffer
On 07/18/2015 11:18 AM, Christoffer Dall wrote: > On Mon, Jul 06, 2015 at 02:49:56PM +0200, Eric Auger wrote: >> On halt, the guest is forced to exit and prevented from being >> re-entered. This is synchronous. >> >> Those two operations will be needed for IRQ forwarding setting. >> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> RFC v1 -> v2: >> - add __maybe_unused >> >> RFC: >> - rename the function and this latter becomes static >> - remove __KVM_HAVE_ARCH_HALT_GUEST >> >> v4 -> v5: add arm64 support >> - also defines __KVM_HAVE_ARCH_HALT_GUEST for arm64 >> - add pause field >> --- >> arch/arm/include/asm/kvm_host.h | 3 +++ >> arch/arm/kvm/arm.c | 35 ++++++++++++++++++++++++++++++++--- >> arch/arm64/include/asm/kvm_host.h | 3 +++ >> 3 files changed, 38 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h >> index 304004d..899ae27 100644 >> --- a/arch/arm/include/asm/kvm_host.h >> +++ b/arch/arm/include/asm/kvm_host.h >> @@ -132,6 +132,9 @@ struct kvm_vcpu_arch { >> /* vcpu power-off state */ >> bool power_off; >> >> + /* Don't run the guest */ >> + bool pause; >> + >> /* IO related fields */ >> struct kvm_decode mmio_decode; >> >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index 7537e68..46d4ef6 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c >> @@ -471,11 +471,39 @@ bool kvm_arch_intc_initialized(struct kvm *kvm) >> return vgic_initialized(kvm); >> } >> >> +static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused; >> +static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused; >> + >> +static void kvm_arm_halt_guest(struct kvm *kvm) >> +{ >> + int i; >> + struct kvm_vcpu *vcpu; >> + >> + kvm_for_each_vcpu(i, vcpu, kvm) >> + vcpu->arch.pause = true; >> + force_vm_exit(cpu_all_mask); >> +} >> + >> +static void kvm_arm_resume_guest(struct kvm *kvm) >> +{ >> + int i; >> + struct kvm_vcpu *vcpu; >> + >> + kvm_for_each_vcpu(i, vcpu, kvm) { >> + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); >> + >> + vcpu->arch.pause = false; >> + wake_up_interruptible(wq); >> + } >> +} >> + >> + >> static void vcpu_pause(struct kvm_vcpu *vcpu) >> { >> wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); >> >> - wait_event_interruptible(*wq, !vcpu->arch.power_off); >> + wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && >> + (!vcpu->arch.pause))); >> } >> >> static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) >> @@ -525,7 +553,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> >> update_vttbr(vcpu->kvm); >> >> - if (vcpu->arch.power_off) >> + if (vcpu->arch.power_off || vcpu->arch.pause) >> vcpu_pause(vcpu); > > These two changes really make me feel like kvm_arch_vcpu_runnable() > should be changed to check for both flags and all thes eplaces should > check for runnable instead. > > To make the runnable function more robust, perhaps it should check: > > 1. The vcpu is neither paused nor powered off > 2. The vcpu is not in a WFI state (vcpu->arch.wfi_request) OR there are > pending interrupts (the current check). > > Then the logic would fit the name of the function, instead of being a > specific check only called through handle_wfx. Reading this again, I reconsider what I said in previous comment answer and this definitively makes sense to update the runnable function. I was/am afraid by this vcpu_block function and I need to better undertand it - I think what I said previously is not correct - . I will investigate that direction. Eric > >> >> /* >> @@ -551,7 +579,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> run->exit_reason = KVM_EXIT_INTR; >> } >> >> - if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { >> + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || >> + vcpu->arch.pause) { > > so why do we need to re-check the pause flag, but not the power_off > flag? That is non-trivial for sure, so if it's correct, deserves a > comment. Also see my comment on the last patch. > >> local_irq_enable(); >> preempt_enable(); >> kvm_vgic_sync_hwstate(vcpu); >> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h >> index 009da6b..69e3785 100644 >> --- a/arch/arm64/include/asm/kvm_host.h >> +++ b/arch/arm64/include/asm/kvm_host.h >> @@ -125,6 +125,9 @@ struct kvm_vcpu_arch { >> /* vcpu power-off state */ >> bool power_off; >> >> + /* Don't run the guest */ > > Probably need to be more clear about this being an implementation > requirement rather than being guest visible or related to any > architectural concept. > >> + bool pause; >> + >> /* IO related fields */ >> struct kvm_decode mmio_decode; >> >> -- >> 1.9.1 >> > > Thanks, > -Christoffer >
Hi Chistoffer, On 07/18/2015 11:18 AM, Christoffer Dall wrote: > On Mon, Jul 06, 2015 at 02:49:56PM +0200, Eric Auger wrote: >> On halt, the guest is forced to exit and prevented from being >> re-entered. This is synchronous. >> >> Those two operations will be needed for IRQ forwarding setting. >> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> RFC v1 -> v2: >> - add __maybe_unused >> >> RFC: >> - rename the function and this latter becomes static >> - remove __KVM_HAVE_ARCH_HALT_GUEST >> >> v4 -> v5: add arm64 support >> - also defines __KVM_HAVE_ARCH_HALT_GUEST for arm64 >> - add pause field >> --- >> arch/arm/include/asm/kvm_host.h | 3 +++ >> arch/arm/kvm/arm.c | 35 ++++++++++++++++++++++++++++++++--- >> arch/arm64/include/asm/kvm_host.h | 3 +++ >> 3 files changed, 38 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h >> index 304004d..899ae27 100644 >> --- a/arch/arm/include/asm/kvm_host.h >> +++ b/arch/arm/include/asm/kvm_host.h >> @@ -132,6 +132,9 @@ struct kvm_vcpu_arch { >> /* vcpu power-off state */ >> bool power_off; >> >> + /* Don't run the guest */ >> + bool pause; >> + >> /* IO related fields */ >> struct kvm_decode mmio_decode; >> >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index 7537e68..46d4ef6 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c >> @@ -471,11 +471,39 @@ bool kvm_arch_intc_initialized(struct kvm *kvm) >> return vgic_initialized(kvm); >> } >> >> +static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused; >> +static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused; >> + >> +static void kvm_arm_halt_guest(struct kvm *kvm) >> +{ >> + int i; >> + struct kvm_vcpu *vcpu; >> + >> + kvm_for_each_vcpu(i, vcpu, kvm) >> + vcpu->arch.pause = true; >> + force_vm_exit(cpu_all_mask); >> +} >> + >> +static void kvm_arm_resume_guest(struct kvm *kvm) >> +{ >> + int i; >> + struct kvm_vcpu *vcpu; >> + >> + kvm_for_each_vcpu(i, vcpu, kvm) { >> + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); >> + >> + vcpu->arch.pause = false; >> + wake_up_interruptible(wq); >> + } >> +} >> + >> + >> static void vcpu_pause(struct kvm_vcpu *vcpu) >> { >> wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); >> >> - wait_event_interruptible(*wq, !vcpu->arch.power_off); >> + wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && >> + (!vcpu->arch.pause))); >> } >> >> static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) >> @@ -525,7 +553,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> >> update_vttbr(vcpu->kvm); >> >> - if (vcpu->arch.power_off) >> + if (vcpu->arch.power_off || vcpu->arch.pause) >> vcpu_pause(vcpu); > > These two changes really make me feel like kvm_arch_vcpu_runnable() > should be changed to check for both flags and all thes eplaces should > check for runnable instead. > > To make the runnable function more robust, perhaps it should check: > > 1. The vcpu is neither paused nor powered off > 2. The vcpu is not in a WFI state (vcpu->arch.wfi_request) OR there are > pending interrupts (the current check). I did not understand what you meant by this vcpu->arch.wfi_request, which I could not find. In case we call runnable from kvm_vcpu_block/kvm_vcpu_check_block we sometimes are in WFI (kvm_handle_wfx)? Thanks Eric > > Then the logic would fit the name of the function, instead of being a > specific check only called through handle_wfx. > >> >> /* >> @@ -551,7 +579,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) >> run->exit_reason = KVM_EXIT_INTR; >> } >> >> - if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { >> + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || >> + vcpu->arch.pause) { > > so why do we need to re-check the pause flag, but not the power_off > flag? That is non-trivial for sure, so if it's correct, deserves a > comment. Also see my comment on the last patch. > >> local_irq_enable(); >> preempt_enable(); >> kvm_vgic_sync_hwstate(vcpu); >> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h >> index 009da6b..69e3785 100644 >> --- a/arch/arm64/include/asm/kvm_host.h >> +++ b/arch/arm64/include/asm/kvm_host.h >> @@ -125,6 +125,9 @@ struct kvm_vcpu_arch { >> /* vcpu power-off state */ >> bool power_off; >> >> + /* Don't run the guest */ > > Probably need to be more clear about this being an implementation > requirement rather than being guest visible or related to any > architectural concept. > >> + bool pause; >> + >> /* IO related fields */ >> struct kvm_decode mmio_decode; >> >> -- >> 1.9.1 >> > > Thanks, > -Christoffer >
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 304004d..899ae27 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -132,6 +132,9 @@ struct kvm_vcpu_arch { /* vcpu power-off state */ bool power_off; + /* Don't run the guest */ + bool pause; + /* IO related fields */ struct kvm_decode mmio_decode; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 7537e68..46d4ef6 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -471,11 +471,39 @@ bool kvm_arch_intc_initialized(struct kvm *kvm) return vgic_initialized(kvm); } +static void kvm_arm_halt_guest(struct kvm *kvm) __maybe_unused; +static void kvm_arm_resume_guest(struct kvm *kvm) __maybe_unused; + +static void kvm_arm_halt_guest(struct kvm *kvm) +{ + int i; + struct kvm_vcpu *vcpu; + + kvm_for_each_vcpu(i, vcpu, kvm) + vcpu->arch.pause = true; + force_vm_exit(cpu_all_mask); +} + +static void kvm_arm_resume_guest(struct kvm *kvm) +{ + int i; + struct kvm_vcpu *vcpu; + + kvm_for_each_vcpu(i, vcpu, kvm) { + wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); + + vcpu->arch.pause = false; + wake_up_interruptible(wq); + } +} + + static void vcpu_pause(struct kvm_vcpu *vcpu) { wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu); - wait_event_interruptible(*wq, !vcpu->arch.power_off); + wait_event_interruptible(*wq, ((!vcpu->arch.power_off) && + (!vcpu->arch.pause))); } static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) @@ -525,7 +553,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) update_vttbr(vcpu->kvm); - if (vcpu->arch.power_off) + if (vcpu->arch.power_off || vcpu->arch.pause) vcpu_pause(vcpu); /* @@ -551,7 +579,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) run->exit_reason = KVM_EXIT_INTR; } - if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { + if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) || + vcpu->arch.pause) { local_irq_enable(); preempt_enable(); kvm_vgic_sync_hwstate(vcpu); diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 009da6b..69e3785 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -125,6 +125,9 @@ struct kvm_vcpu_arch { /* vcpu power-off state */ bool power_off; + /* Don't run the guest */ + bool pause; + /* IO related fields */ struct kvm_decode mmio_decode;
On halt, the guest is forced to exit and prevented from being re-entered. This is synchronous. Those two operations will be needed for IRQ forwarding setting. Signed-off-by: Eric Auger <eric.auger@linaro.org> --- RFC v1 -> v2: - add __maybe_unused RFC: - rename the function and this latter becomes static - remove __KVM_HAVE_ARCH_HALT_GUEST v4 -> v5: add arm64 support - also defines __KVM_HAVE_ARCH_HALT_GUEST for arm64 - add pause field --- arch/arm/include/asm/kvm_host.h | 3 +++ arch/arm/kvm/arm.c | 35 ++++++++++++++++++++++++++++++++--- arch/arm64/include/asm/kvm_host.h | 3 +++ 3 files changed, 38 insertions(+), 3 deletions(-)