| Message ID | 1631167288-27627-3-git-send-email-skakit@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add Vol+ support for sc7280-idp | expand |
Quoting satya priya (2021-09-08 23:01:28) > diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > index 371a2a9..434c1c6 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > @@ -239,6 +239,26 @@ > cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; > }; > > +&soc { > + gpio_keys { Should be gpio-keys. Node names shouldn't have underscores. Typically underscores are replaced with dashes. > + compatible = "gpio-keys"; > + label = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&key_vol_up_default>; > + > + vol_up { Should be vol-up or volume-up. > + label = "volume_up"; > + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; > + linux,input-type = <1>; > + linux,code = <KEY_VOLUMEUP>; > + gpio-key,wakeup; > + debounce-interval = <15>; > + linux,can-disable; > + }; > + }; > +}; > + > &uart5 { > status = "okay"; > }; > @@ -284,6 +304,17 @@ > > /* PINCTRL - additions to nodes defined in sc7280.dtsi */ > > +&pm7325_gpios { > + key_vol_up_default: key_vol_up_default { Should be key_vol_up_default: key-vol-up-default { > + pins = "gpio6"; > + function = "normal"; > + input-enable; > + bias-pull-up; > + power-source = <0>; > + qcom,drive-strength = <3>; > + }; > +}; > + > &qup_uart5_default { > tx { > pins = "gpio46";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 371a2a9..434c1c6 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -239,6 +239,26 @@ cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; }; +&soc { + gpio_keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + vol_up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; +}; + &uart5 { status = "okay"; }; @@ -284,6 +304,17 @@ /* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pm7325_gpios { + key_vol_up_default: key_vol_up_default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + &qup_uart5_default { tx { pins = "gpio46";
Add pm7325 PMIC gpio support for vol+ on sc7280-idp. Signed-off-by: satya priya <skakit@codeaurora.org> --- Changes in V2: - No changes. Changes in V3: - Sorted the nodes alphabetically. arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)