| Message ID | 1438276141-16902-6-git-send-email-peter.griffin@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
Hi Mauro, On Mon, 17 Aug 2015, Mauro Carvalho Chehab wrote: > Em Thu, 30 Jul 2015 18:08:55 +0100 > Peter Griffin <peter.griffin@linaro.org> escreveu: > > > This patch adds in the required DT node for the c8sectpfe > > Linux DVB demux driver which allows the tsin channels > > to be used on an upstream kernel. > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > --- > > arch/arm/boot/dts/stihxxx-b2120.dtsi | 38 ++++++++++++++++++++++++++++++++++++ > > 1 file changed, 38 insertions(+) > > > > diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi > > index 62994ae..1bc018e 100644 > > --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi > > +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi > > @@ -6,6 +6,10 @@ > > * it under the terms of the GNU General Public License version 2 as > > * published by the Free Software Foundation. > > */ > > + > > +#include <dt-bindings/clock/stih407-clks.h> > > +#include <dt-bindings/media/c8sectpfe.h> > > + > > / { > > soc { > > sbc_serial0: serial@9530000 { > > @@ -85,5 +89,39 @@ > > status = "okay"; > > }; > > > > + c8sectpfe@08a20000 { > > + compatible = "st,stih407-c8sectpfe"; > > + status = "okay"; > > + reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; > > + reg-names = "c8sectpfe", "c8sectpfe-ram"; > > + > > + interrupts = <0 34 0>, <0 35 0>; > > + interrupt-names = "c8sectpfe-error-irq", > > + "c8sectpfe-idle-irq"; > > + > > + pinctrl-names = "tsin0-serial", "tsin0-parallel", > > + "tsin3-serial", "tsin4-serial", > > + "tsin5-serial"; > > + > > + pinctrl-0 = <&pinctrl_tsin0_serial>; > > + pinctrl-1 = <&pinctrl_tsin0_parallel>; > > + pinctrl-2 = <&pinctrl_tsin3_serial>; > > + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; > > + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; > > + > > + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; > > + clock-names = "c8sectpfe"; > > + > > + /* tsin0 is TSA on NIMA */ > > + tsin0: port@0 { > > + > > + tsin-num = <0>; > > + serial-not-parallel; > > + i2c-bus = <&ssc2>; > > There's no ssc2 defined at the device tree. Whoops, I missed one patch off from the series in v2. > > I'll revert this patch and mark the driver as broken until this gets > fixed. I just sent you another series here https://lkml.org/lkml/2015/8/25/499 which includes this patch, and also the patch which adds ssc2/3, along with a fix to the Kconfig file spotted by Valentin Rothberg. regards, Peter. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 62994ae..1bc018e 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -6,6 +6,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih407-clks.h> +#include <dt-bindings/media/c8sectpfe.h> + / { soc { sbc_serial0: serial@9530000 { @@ -85,5 +89,39 @@ status = "okay"; }; + c8sectpfe@08a20000 { + compatible = "st,stih407-c8sectpfe"; + status = "okay"; + reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; + reg-names = "c8sectpfe", "c8sectpfe-ram"; + + interrupts = <0 34 0>, <0 35 0>; + interrupt-names = "c8sectpfe-error-irq", + "c8sectpfe-idle-irq"; + + pinctrl-names = "tsin0-serial", "tsin0-parallel", + "tsin3-serial", "tsin4-serial", + "tsin5-serial"; + + pinctrl-0 = <&pinctrl_tsin0_serial>; + pinctrl-1 = <&pinctrl_tsin0_parallel>; + pinctrl-2 = <&pinctrl_tsin3_serial>; + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; + + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; + clock-names = "c8sectpfe"; + + /* tsin0 is TSA on NIMA */ + tsin0: port@0 { + + tsin-num = <0>; + serial-not-parallel; + i2c-bus = <&ssc2>; + rst-gpio = <&pio15 4 0>; + + dvb-card = <STV0367_TDA18212_NIMA_1>; + }; + }; }; };
This patch adds in the required DT node for the c8sectpfe Linux DVB demux driver which allows the tsin channels to be used on an upstream kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm/boot/dts/stihxxx-b2120.dtsi | 38 ++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)