new file mode 100644
@@ -0,0 +1,1235 @@
+/*
+ * c8sectpfe-core.c - C8SECTPFE STi DVB driver
+ *
+ * Copyright (c) STMicroelectronics 2015
+ *
+ * Author:Peter Bennett <peter.bennett@st.com>
+ * Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dvb/dmx.h>
+#include <linux/dvb/frontend.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/wait.h>
+
+#include "c8sectpfe-core.h"
+#include "c8sectpfe-common.h"
+#include "c8sectpfe-debugfs.h"
+#include "dmxdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#define FIRMWARE_MEMDMA "pti_memdma_h407.elf"
+MODULE_FIRMWARE(FIRMWARE_MEMDMA);
+
+#define PID_TABLE_SIZE 1024
+#define POLL_MSECS 50
+
+static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei);
+
+#define TS_PKT_SIZE 188
+#define HEADER_SIZE (4)
+#define PACKET_SIZE (TS_PKT_SIZE+HEADER_SIZE)
+
+#define FEI_ALIGNMENT (32)
+/* hw requires minimum of 8*PACKET_SIZE and padded to 8byte boundary */
+#define FEI_BUFFER_SIZE (8*PACKET_SIZE*340)
+
+#define FIFO_LEN 1024
+
+static void c8sectpfe_timer_interrupt(unsigned long ac8sectpfei)
+{
+ struct c8sectpfei *fei = (struct c8sectpfei *)ac8sectpfei;
+ struct channel_info *channel;
+ int chan_num;
+
+ /* iterate through input block channels */
+ for (chan_num = 0; chan_num < fei->tsin_count; chan_num++) {
+ channel = fei->channel_data[chan_num];
+
+ /* is this descriptor initialised and TP enabled */
+ if (channel->irec && readl(channel->irec + DMA_PRDS_TPENABLE))
+ tasklet_schedule(&channel->tsklet);
+ }
+
+ fei->timer.expires = jiffies + msecs_to_jiffies(POLL_MSECS);
+ add_timer(&fei->timer);
+}
+
+static void channel_swdemux_tsklet(unsigned long data)
+{
+ struct channel_info *channel = (struct channel_info *)data;
+ struct c8sectpfei *fei = channel->fei;
+ unsigned long wp, rp;
+ int pos, num_packets, n, size;
+ u8 *buf;
+
+ if (unlikely(!channel || !channel->irec))
+ return;
+
+ wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0));
+ rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0));
+
+ pos = rp - channel->back_buffer_busaddr;
+
+ /* has it wrapped */
+ if (wp < rp)
+ wp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE;
+
+ size = wp - rp;
+ num_packets = size / PACKET_SIZE;
+
+ /* manage cache so data is visible to CPU */
+ dma_sync_single_for_cpu(fei->dev,
+ rp,
+ size,
+ DMA_FROM_DEVICE);
+
+ buf = (u8 *) channel->back_buffer_aligned;
+
+ dev_dbg(fei->dev,
+ "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\t"
+ "rp=0x%lx, wp=0x%lx\n",
+ channel->tsin_id, channel, num_packets, buf, pos, rp, wp);
+
+ for (n = 0; n < num_packets; n++) {
+ dvb_dmx_swfilter_packets(
+ &fei->c8sectpfe[0]->
+ demux[channel->demux_mapping].dvb_demux,
+ &buf[pos], 1);
+
+ pos += PACKET_SIZE;
+ }
+
+ /* advance the read pointer */
+ if (wp == (channel->back_buffer_busaddr + FEI_BUFFER_SIZE))
+ writel(channel->back_buffer_busaddr, channel->irec +
+ DMA_PRDS_BUSRP_TP(0));
+ else
+ writel(wp, channel->irec + DMA_PRDS_BUSWP_TP(0));
+}
+
+static int c8sectpfe_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *demux = dvbdmxfeed->demux;
+ struct stdemux *stdemux = (struct stdemux *)demux->priv;
+ struct c8sectpfei *fei = stdemux->c8sectpfei;
+ struct channel_info *channel;
+ u32 tmp;
+ unsigned long *bitmap;
+
+ switch (dvbdmxfeed->type) {
+ case DMX_TYPE_TS:
+ break;
+ case DMX_TYPE_SEC:
+ break;
+ default:
+ dev_err(fei->dev, "%s:%d Error bailing\n"
+ , __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ if (dvbdmxfeed->type == DMX_TYPE_TS) {
+ switch (dvbdmxfeed->pes_type) {
+ case DMX_PES_VIDEO:
+ case DMX_PES_AUDIO:
+ case DMX_PES_TELETEXT:
+ case DMX_PES_PCR:
+ case DMX_PES_OTHER:
+ break;
+ default:
+ dev_err(fei->dev, "%s:%d Error bailing\n"
+ , __func__, __LINE__);
+ return -EINVAL;
+ }
+ }
+
+ if (!atomic_read(&fei->fw_loaded)) {
+ dev_err(fei->dev, "%s: c8sectpfe fw not loaded\n", __func__);
+ return -EINVAL;
+ }
+
+ mutex_lock(&fei->lock);
+
+ channel = fei->channel_data[stdemux->tsin_index];
+
+ bitmap = (unsigned long *) channel->pid_buffer_aligned;
+
+ /* 8192 is a special PID */
+ if (dvbdmxfeed->pid == 8192) {
+ tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id));
+ tmp &= ~C8SECTPFE_PID_ENABLE;
+ writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id));
+
+ } else {
+ bitmap_set(bitmap, dvbdmxfeed->pid, 1);
+ }
+
+ /* manage cache so PID bitmap is visible to HW */
+ dma_sync_single_for_device(fei->dev,
+ channel->pid_buffer_busaddr,
+ PID_TABLE_SIZE,
+ DMA_TO_DEVICE);
+
+ channel->active = 1;
+
+ if (fei->global_feed_count == 0) {
+ fei->timer.expires = jiffies +
+ msecs_to_jiffies(msecs_to_jiffies(POLL_MSECS));
+
+ add_timer(&fei->timer);
+ }
+
+ if (stdemux->running_feed_count == 0) {
+
+ dev_dbg(fei->dev, "Starting channel=%p\n", channel);
+
+ tasklet_init(&channel->tsklet, channel_swdemux_tsklet,
+ (unsigned long) channel);
+
+ /* Reset the internal inputblock sram pointers */
+ writel(channel->fifo,
+ fei->io + C8SECTPFE_IB_BUFF_STRT(channel->tsin_id));
+ writel(channel->fifo + FIFO_LEN - 1,
+ fei->io + C8SECTPFE_IB_BUFF_END(channel->tsin_id));
+
+ writel(channel->fifo,
+ fei->io + C8SECTPFE_IB_READ_PNT(channel->tsin_id));
+ writel(channel->fifo,
+ fei->io + C8SECTPFE_IB_WRT_PNT(channel->tsin_id));
+
+
+ /* reset read / write memdma ptrs for this channel */
+ writel(channel->back_buffer_busaddr, channel->irec +
+ DMA_PRDS_BUSBASE_TP(0));
+
+ tmp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE - 1;
+ writel(tmp, channel->irec + DMA_PRDS_BUSTOP_TP(0));
+
+ writel(channel->back_buffer_busaddr, channel->irec +
+ DMA_PRDS_BUSWP_TP(0));
+
+ /* Issue a reset and enable InputBlock */
+ writel(C8SECTPFE_SYS_ENABLE | C8SECTPFE_SYS_RESET
+ , fei->io + C8SECTPFE_IB_SYS(channel->tsin_id));
+
+ /* and enable the tp */
+ writel(0x1, channel->irec + DMA_PRDS_TPENABLE);
+
+ dev_dbg(fei->dev, "%s:%d Starting DMA feed on stdemux=%p\n"
+ , __func__, __LINE__, stdemux);
+ }
+
+ stdemux->running_feed_count++;
+ fei->global_feed_count++;
+
+ mutex_unlock(&fei->lock);
+
+ return 0;
+}
+
+static int c8sectpfe_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+
+ struct dvb_demux *demux = dvbdmxfeed->demux;
+ struct stdemux *stdemux = (struct stdemux *)demux->priv;
+ struct c8sectpfei *fei = stdemux->c8sectpfei;
+ struct channel_info *channel;
+ int idlereq;
+ u32 tmp;
+ int ret;
+ unsigned long *bitmap;
+
+ if (!atomic_read(&fei->fw_loaded)) {
+ dev_err(fei->dev, "%s: c8sectpfe fw not loaded\n", __func__);
+ return -EINVAL;
+ }
+
+ mutex_lock(&fei->lock);
+
+ channel = fei->channel_data[stdemux->tsin_index];
+
+ bitmap = (unsigned long *) channel->pid_buffer_aligned;
+
+ if (dvbdmxfeed->pid == 8192) {
+ tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id));
+ tmp |= C8SECTPFE_PID_ENABLE;
+ writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id));
+ } else {
+ bitmap_clear(bitmap, dvbdmxfeed->pid, 1);
+ }
+
+ /* manage cache so data is visible to HW */
+ dma_sync_single_for_device(fei->dev,
+ channel->pid_buffer_busaddr,
+ PID_TABLE_SIZE,
+ DMA_TO_DEVICE);
+
+ if (--stdemux->running_feed_count == 0) {
+
+ channel = fei->channel_data[stdemux->tsin_index];
+
+ /* TP re-configuration on page 168 of functional spec */
+
+ /* disable IB (prevents more TS data going to memdma) */
+ writel(0, fei->io + C8SECTPFE_IB_SYS(channel->tsin_id));
+
+ /* disable this channels descriptor */
+ writel(0, channel->irec + DMA_PRDS_TPENABLE);
+
+ tasklet_disable(&channel->tsklet);
+
+ /* now request memdma channel goes idle */
+ idlereq = (1 << channel->tsin_id) | IDLEREQ;
+ writel(idlereq, fei->io + DMA_IDLE_REQ);
+
+ /* wait for idle irq handler to signal completion */
+ ret = wait_for_completion_timeout(&channel->idle_completion,
+ msecs_to_jiffies(100));
+
+ if (ret == 0)
+ dev_warn(fei->dev,
+ "Timeout waiting for idle irq on tsin%d\n",
+ channel->tsin_id);
+
+ reinit_completion(&channel->idle_completion);
+
+ /* reset read / write ptrs for this channel */
+
+ writel(channel->back_buffer_busaddr,
+ channel->irec + DMA_PRDS_BUSBASE_TP(0));
+
+ tmp = channel->back_buffer_busaddr + FEI_BUFFER_SIZE - 1;
+ writel(tmp, channel->irec + DMA_PRDS_BUSTOP_TP(0));
+
+ writel(channel->back_buffer_busaddr,
+ channel->irec + DMA_PRDS_BUSWP_TP(0));
+
+ dev_dbg(fei->dev,
+ "%s:%d stopping DMA feed on stdemux=%p channel=%d\n",
+ __func__, __LINE__, stdemux, channel->tsin_id);
+
+ /* turn off all PIDS in the bitmap */
+ memset((void *)channel->pid_buffer_aligned
+ , 0x00, PID_TABLE_SIZE);
+
+ /* manage cache so data is visible to HW */
+ dma_sync_single_for_device(fei->dev,
+ channel->pid_buffer_busaddr,
+ PID_TABLE_SIZE,
+ DMA_TO_DEVICE);
+
+ channel->active = 0;
+ }
+
+ if (--fei->global_feed_count == 0) {
+ dev_dbg(fei->dev, "%s:%d global_feed_count=%d\n"
+ , __func__, __LINE__, fei->global_feed_count);
+
+ del_timer(&fei->timer);
+ }
+
+ mutex_unlock(&fei->lock);
+
+ return 0;
+}
+
+static struct channel_info *find_channel(struct c8sectpfei *fei, int tsin_num)
+{
+ int i;
+
+ for (i = 0; i < C8SECTPFE_MAXCHANNEL; i++) {
+ if (!fei->channel_data[i])
+ continue;
+
+ if (fei->channel_data[i]->tsin_id == tsin_num)
+ return fei->channel_data[i];
+ }
+
+ return NULL;
+}
+
+static void c8sectpfe_getconfig(struct c8sectpfei *fei)
+{
+ struct c8sectpfe_hw *hw = &fei->hw_stats;
+
+ hw->num_ib = readl(fei->io + SYS_CFG_NUM_IB);
+ hw->num_mib = readl(fei->io + SYS_CFG_NUM_MIB);
+ hw->num_swts = readl(fei->io + SYS_CFG_NUM_SWTS);
+ hw->num_tsout = readl(fei->io + SYS_CFG_NUM_TSOUT);
+ hw->num_ccsc = readl(fei->io + SYS_CFG_NUM_CCSC);
+ hw->num_ram = readl(fei->io + SYS_CFG_NUM_RAM);
+ hw->num_tp = readl(fei->io + SYS_CFG_NUM_TP);
+
+ dev_info(fei->dev, "C8SECTPFE hw supports the following:\n");
+ dev_info(fei->dev, "Input Blocks: %d\n", hw->num_ib);
+ dev_info(fei->dev, "Merged Input Blocks: %d\n", hw->num_mib);
+ dev_info(fei->dev, "Software Transport Stream Inputs: %d\n"
+ , hw->num_swts);
+ dev_info(fei->dev, "Transport Stream Output: %d\n", hw->num_tsout);
+ dev_info(fei->dev, "Cable Card Converter: %d\n", hw->num_ccsc);
+ dev_info(fei->dev, "RAMs supported by C8SECTPFE: %d\n", hw->num_ram);
+ dev_info(fei->dev, "Tango TPs supported by C8SECTPFE: %d\n"
+ , hw->num_tp);
+}
+
+static irqreturn_t c8sectpfe_idle_irq_handler(int irq, void *priv)
+{
+ struct c8sectpfei *fei = priv;
+ struct channel_info *chan;
+ int bit;
+ unsigned long tmp = readl(fei->io + DMA_IDLE_REQ);
+
+ /* page 168 of functional spec: Clear the idle request
+ by writing 0 to the C8SECTPFE_DMA_IDLE_REQ register. */
+
+ /* signal idle completion */
+ for_each_set_bit(bit, &tmp, fei->hw_stats.num_ib) {
+
+ chan = find_channel(fei, bit);
+
+ if (chan)
+ complete(&chan->idle_completion);
+ }
+
+ writel(0, fei->io + DMA_IDLE_REQ);
+
+ return IRQ_HANDLED;
+}
+
+
+static void free_input_block(struct c8sectpfei *fei, struct channel_info *tsin)
+{
+ if (!fei || !tsin)
+ return;
+
+ if (tsin->back_buffer_busaddr)
+ if (!dma_mapping_error(fei->dev, tsin->back_buffer_busaddr))
+ dma_unmap_single(fei->dev, tsin->back_buffer_busaddr,
+ FEI_BUFFER_SIZE, DMA_BIDIRECTIONAL);
+
+ kfree(tsin->back_buffer_start);
+
+ if (tsin->pid_buffer_busaddr)
+ if (!dma_mapping_error(fei->dev, tsin->pid_buffer_busaddr))
+ dma_unmap_single(fei->dev, tsin->pid_buffer_busaddr,
+ PID_TABLE_SIZE, DMA_BIDIRECTIONAL);
+
+ kfree(tsin->pid_buffer_start);
+}
+
+#define MAX_NAME 20
+
+static int configure_memdma_and_inputblock(struct c8sectpfei *fei,
+ struct channel_info *tsin)
+{
+ int ret;
+ u32 tmp;
+ char tsin_pin_name[MAX_NAME];
+
+ if (!fei || !tsin)
+ return -EINVAL;
+
+ dev_dbg(fei->dev, "%s:%d Configuring channel=%p tsin=%d\n"
+ , __func__, __LINE__, tsin, tsin->tsin_id);
+
+ init_completion(&tsin->idle_completion);
+
+ tsin->back_buffer_start = kzalloc(FEI_BUFFER_SIZE +
+ FEI_ALIGNMENT, GFP_KERNEL);
+
+ if (!tsin->back_buffer_start) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /* Ensure backbuffer is 32byte aligned */
+ tsin->back_buffer_aligned = tsin->back_buffer_start
+ + FEI_ALIGNMENT;
+
+ tsin->back_buffer_aligned = (void *)
+ (((uintptr_t) tsin->back_buffer_aligned) & ~0x1F);
+
+ tsin->back_buffer_busaddr = dma_map_single(fei->dev,
+ (void *)tsin->back_buffer_aligned,
+ FEI_BUFFER_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ if (dma_mapping_error(fei->dev, tsin->back_buffer_busaddr)) {
+ dev_err(fei->dev, "failed to map back_buffer\n");
+ ret = -EFAULT;
+ goto err_unmap;
+ }
+
+ /*
+ * The pid buffer can be configured (in hw) for byte or bit
+ * per pid. By powers of deduction we conclude stih407 family
+ * is configured (at SoC design stage) for bit per pid.
+ */
+ tsin->pid_buffer_start = kzalloc(2048, GFP_KERNEL);
+
+ if (!tsin->pid_buffer_start) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /*
+ * PID buffer needs to be aligned to size of the pid table
+ * which at bit per pid is 1024 bytes (8192 pids / 8).
+ * PIDF_BASE register enforces this alignment when writing
+ * the register.
+ */
+
+ tsin->pid_buffer_aligned = tsin->pid_buffer_start +
+ PID_TABLE_SIZE;
+
+ tsin->pid_buffer_aligned = (void *)
+ (((uintptr_t) tsin->pid_buffer_aligned) & ~0x3ff);
+
+ tsin->pid_buffer_busaddr = dma_map_single(fei->dev,
+ tsin->pid_buffer_aligned,
+ PID_TABLE_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ if (dma_mapping_error(fei->dev, tsin->pid_buffer_busaddr)) {
+ dev_err(fei->dev, "failed to map pid_bitmap\n");
+ ret = -EFAULT;
+ goto err_unmap;
+ }
+
+ /* manage cache so pid bitmap is visible to HW */
+ dma_sync_single_for_device(fei->dev,
+ tsin->pid_buffer_busaddr,
+ PID_TABLE_SIZE,
+ DMA_TO_DEVICE);
+
+ snprintf(tsin_pin_name, MAX_NAME, "tsin%d-%s", tsin->tsin_id,
+ (tsin->serial_not_parallel ? "serial" : "parallel"));
+
+ tsin->pstate = pinctrl_lookup_state(fei->pinctrl, tsin_pin_name);
+ if (IS_ERR(tsin->pstate)) {
+ dev_err(fei->dev, "%s: pinctrl_lookup_state couldn't find %s state\n"
+ , __func__, tsin_pin_name);
+ ret = PTR_ERR(tsin->pstate);
+ goto err_unmap;
+ }
+
+ ret = pinctrl_select_state(fei->pinctrl, tsin->pstate);
+
+ if (ret) {
+ dev_err(fei->dev, "%s: pinctrl_select_state failed\n"
+ , __func__);
+ goto err_unmap;
+ }
+
+ /* Enable this input block */
+ tmp = readl(fei->io + SYS_INPUT_CLKEN);
+ tmp |= BIT(tsin->tsin_id);
+ writel(tmp, fei->io + SYS_INPUT_CLKEN);
+
+ if (tsin->serial_not_parallel)
+ tmp |= C8SECTPFE_SERIAL_NOT_PARALLEL;
+
+ if (tsin->invert_ts_clk)
+ tmp |= C8SECTPFE_INVERT_TSCLK;
+
+ if (tsin->async_not_sync)
+ tmp |= C8SECTPFE_ASYNC_NOT_SYNC;
+
+ tmp |= C8SECTPFE_ALIGN_BYTE_SOP | C8SECTPFE_BYTE_ENDIANNESS_MSB;
+
+ writel(tmp, fei->io + C8SECTPFE_IB_IP_FMT_CFG(tsin->tsin_id));
+
+ writel(C8SECTPFE_SYNC(0x9) |
+ C8SECTPFE_DROP(0x9) |
+ C8SECTPFE_TOKEN(0x47),
+ fei->io + C8SECTPFE_IB_SYNCLCKDRP_CFG(tsin->tsin_id));
+
+ writel(TS_PKT_SIZE, fei->io + C8SECTPFE_IB_PKT_LEN(tsin->tsin_id));
+
+ /* Place the FIFO's at the end of the irec descriptors */
+
+ tsin->fifo = (tsin->tsin_id * FIFO_LEN);
+
+ writel(tsin->fifo, fei->io + C8SECTPFE_IB_BUFF_STRT(tsin->tsin_id));
+ writel(tsin->fifo + FIFO_LEN - 1,
+ fei->io + C8SECTPFE_IB_BUFF_END(tsin->tsin_id));
+
+ writel(tsin->fifo, fei->io + C8SECTPFE_IB_READ_PNT(tsin->tsin_id));
+ writel(tsin->fifo, fei->io + C8SECTPFE_IB_WRT_PNT(tsin->tsin_id));
+
+ writel(tsin->pid_buffer_busaddr,
+ fei->io + PIDF_BASE(tsin->tsin_id));
+
+ dev_info(fei->dev, "chan=%d PIDF_BASE=0x%x pid_bus_addr=0x%x\n",
+ tsin->tsin_id, readl(fei->io + PIDF_BASE(tsin->tsin_id)),
+ tsin->pid_buffer_busaddr);
+
+ /* Configure and enable HW PID filtering */
+
+ /*
+ * The PID value is created by assembling the first 8 bytes of
+ * the TS packet into a 64-bit word in big-endian format. A
+ * slice of that 64-bit word is taken from
+ * (PID_OFFSET+PID_NUM_BITS-1) to PID_OFFSET.
+ */
+ tmp = (C8SECTPFE_PID_ENABLE | C8SECTPFE_PID_NUMBITS(13)
+ | C8SECTPFE_PID_OFFSET(40));
+
+ writel(tmp, fei->io + C8SECTPFE_IB_PID_SET(tsin->tsin_id));
+
+ dev_dbg(fei->dev, "chan=%d setting wp: %d, rp: %d, buf: %d-%d\n",
+ tsin->tsin_id,
+ readl(fei->io + C8SECTPFE_IB_WRT_PNT(tsin->tsin_id)),
+ readl(fei->io + C8SECTPFE_IB_READ_PNT(tsin->tsin_id)),
+ readl(fei->io + C8SECTPFE_IB_BUFF_STRT(tsin->tsin_id)),
+ readl(fei->io + C8SECTPFE_IB_BUFF_END(tsin->tsin_id)));
+
+ /* Get base addpress of pointer record block from DMEM */
+ tsin->irec = fei->io + DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET +
+ readl(fei->io + DMA_PTRREC_BASE);
+
+ /* fill out pointer record data structure */
+
+ /* advance pointer record block to our channel */
+ tsin->irec += (tsin->tsin_id * DMA_PRDS_SIZE);
+
+ writel(tsin->fifo, tsin->irec + DMA_PRDS_MEMBASE);
+
+ writel(tsin->fifo + FIFO_LEN - 1, tsin->irec + DMA_PRDS_MEMTOP);
+
+ writel((188 + 7)&~7, tsin->irec + DMA_PRDS_PKTSIZE);
+
+ writel(0x1, tsin->irec + DMA_PRDS_TPENABLE);
+
+ /* read/write pointers with physical bus address */
+
+ writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSBASE_TP(0));
+
+ tmp = tsin->back_buffer_busaddr + FEI_BUFFER_SIZE - 1;
+ writel(tmp, tsin->irec + DMA_PRDS_BUSTOP_TP(0));
+
+ writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSWP_TP(0));
+ writel(tsin->back_buffer_busaddr, tsin->irec + DMA_PRDS_BUSRP_TP(0));
+
+ /* initialize tasklet */
+ tasklet_init(&tsin->tsklet, channel_swdemux_tsklet,
+ (unsigned long) tsin);
+
+ return 0;
+
+err_unmap:
+ free_input_block(fei, tsin);
+ return ret;
+}
+
+static irqreturn_t c8sectpfe_error_irq_handler(int irq, void *priv)
+{
+ struct c8sectpfei *fei = priv;
+
+ dev_err(fei->dev, "%s: error handling not yet implemented\n"
+ , __func__);
+
+ /*
+ * TODO FIXME we should detect some error conditions here
+ * and ideally so something about them!
+ */
+
+ return IRQ_HANDLED;
+}
+
+static int c8sectpfe_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+ struct c8sectpfei *fei;
+ struct resource *res;
+ int ret, index = 0;
+ struct channel_info *tsin;
+
+ /* Allocate the c8sectpfei structure */
+ fei = devm_kzalloc(dev, sizeof(struct c8sectpfei), GFP_KERNEL);
+ if (!fei)
+ return -ENOMEM;
+
+ fei->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "c8sectpfe");
+ fei->io = devm_ioremap_resource(dev, res);
+ if (IS_ERR(fei->io))
+ return PTR_ERR(fei->io);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "c8sectpfe-ram");
+ fei->sram = devm_ioremap_resource(dev, res);
+ if (IS_ERR(fei->sram))
+ return PTR_ERR(fei->sram);
+
+ fei->sram_size = res->end - res->start;
+
+ fei->idle_irq = platform_get_irq_byname(pdev, "c8sectpfe-idle-irq");
+ if (fei->idle_irq < 0) {
+ dev_err(dev, "Can't get c8sectpfe-idle-irq\n");
+ return fei->idle_irq;
+ }
+
+ fei->error_irq = platform_get_irq_byname(pdev, "c8sectpfe-error-irq");
+ if (fei->error_irq < 0) {
+ dev_err(dev, "Can't get c8sectpfe-error-irq\n");
+ return fei->error_irq;
+ }
+
+ platform_set_drvdata(pdev, fei);
+
+ fei->c8sectpfeclk = devm_clk_get(dev, "c8sectpfe");
+ if (IS_ERR(fei->c8sectpfeclk)) {
+ dev_err(dev, "c8sectpfe clk not found\n");
+ return PTR_ERR(fei->c8sectpfeclk);
+ }
+
+ ret = clk_prepare_enable(fei->c8sectpfeclk);
+ if (ret) {
+ dev_err(dev, "Failed to enable c8sectpfe clock\n");
+ return ret;
+ }
+
+ /* to save power disable all IP's (on by default) */
+ writel(0, fei->io + SYS_INPUT_CLKEN);
+
+ /* Enable memdma clock */
+ writel(MEMDMAENABLE, fei->io + SYS_OTHER_CLKEN);
+
+ /* clear internal sram */
+ memset_io(fei->sram, 0x0, fei->sram_size);
+
+ c8sectpfe_getconfig(fei);
+
+ ret = devm_request_irq(dev, fei->idle_irq, c8sectpfe_idle_irq_handler,
+ 0, "c8sectpfe-idle-irq", fei);
+ if (ret) {
+ dev_err(dev, "Can't register c8sectpfe-idle-irq IRQ.\n");
+ goto err_clk_disable;
+ }
+
+ ret = devm_request_irq(dev, fei->error_irq,
+ c8sectpfe_error_irq_handler, 0,
+ "c8sectpfe-error-irq", fei);
+ if (ret) {
+ dev_err(dev, "Can't register c8sectpfe-error-irq IRQ.\n");
+ goto err_clk_disable;
+ }
+
+ fei->tsin_count = of_get_child_count(np);
+
+ if (fei->tsin_count > C8SECTPFE_MAX_TSIN_CHAN ||
+ fei->tsin_count > fei->hw_stats.num_ib) {
+
+ dev_err(dev, "More tsin declared than exist on SoC!\n");
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ fei->pinctrl = devm_pinctrl_get(dev);
+
+ if (IS_ERR(fei->pinctrl)) {
+ dev_err(dev, "Error getting tsin pins\n");
+ ret = PTR_ERR(fei->pinctrl);
+ goto err_clk_disable;
+ }
+
+ for_each_child_of_node(np, child) {
+ struct device_node *i2c_bus;
+
+ fei->channel_data[index] = devm_kzalloc(dev,
+ sizeof(struct channel_info),
+ GFP_KERNEL);
+
+ if (!fei->channel_data[index]) {
+ ret = -ENOMEM;
+ goto err_clk_disable;
+ }
+
+ tsin = fei->channel_data[index];
+
+ tsin->fei = fei;
+
+ ret = of_property_read_u32(child, "tsin-num", &tsin->tsin_id);
+ if (ret) {
+ dev_err(&pdev->dev, "No tsin_num found\n");
+ goto err_clk_disable;
+ }
+
+ /* sanity check value */
+ if (tsin->tsin_id > fei->hw_stats.num_ib) {
+ dev_err(&pdev->dev,
+ "tsin-num %d specified greater than number\n\t"
+ "of input block hw in SoC! (%d)",
+ tsin->tsin_id, fei->hw_stats.num_ib);
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ tsin->invert_ts_clk = of_property_read_bool(child,
+ "invert-ts-clk");
+
+ tsin->serial_not_parallel = of_property_read_bool(child,
+ "serial-not-parallel");
+
+ tsin->async_not_sync = of_property_read_bool(child,
+ "async-not-sync");
+
+ ret = of_property_read_u32(child, "dvb-card",
+ &tsin->dvb_card);
+ if (ret) {
+ dev_err(&pdev->dev, "No dvb-card found\n");
+ goto err_clk_disable;
+ }
+
+ i2c_bus = of_parse_phandle(child, "i2c-bus", 0);
+ if (!i2c_bus) {
+ dev_err(&pdev->dev, "No i2c-bus found\n");
+ goto err_clk_disable;
+ }
+ tsin->i2c_adapter =
+ of_find_i2c_adapter_by_node(i2c_bus);
+ if (!tsin->i2c_adapter) {
+ dev_err(&pdev->dev, "No i2c adapter found\n");
+ of_node_put(i2c_bus);
+ goto err_clk_disable;
+ }
+ of_node_put(i2c_bus);
+
+ tsin->rst_gpio = of_get_named_gpio(child, "rst-gpio", 0);
+
+ ret = gpio_is_valid(tsin->rst_gpio);
+ if (!ret) {
+ dev_err(dev,
+ "reset gpio for tsin%d not valid (gpio=%d)\n",
+ tsin->tsin_id, tsin->rst_gpio);
+ goto err_clk_disable;
+ }
+
+ ret = devm_gpio_request_one(dev, tsin->rst_gpio,
+ GPIOF_OUT_INIT_LOW, "NIM reset");
+ if (ret && ret != -EBUSY) {
+ dev_err(dev, "Can't request tsin%d reset gpio\n"
+ , fei->channel_data[index]->tsin_id);
+ goto err_clk_disable;
+ }
+
+ if (!ret) {
+ /* toggle reset lines */
+ gpio_direction_output(tsin->rst_gpio, 0);
+ usleep_range(3500, 5000);
+ gpio_direction_output(tsin->rst_gpio, 1);
+ usleep_range(3000, 5000);
+ }
+
+ tsin->demux_mapping = index;
+
+ dev_dbg(fei->dev,
+ "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\t"
+ "serial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n",
+ fei->channel_data[index], index,
+ tsin->tsin_id, tsin->invert_ts_clk,
+ tsin->serial_not_parallel, tsin->async_not_sync,
+ tsin->dvb_card);
+
+ index++;
+ }
+
+ /* Setup timer interrupt */
+ init_timer(&fei->timer);
+ fei->timer.function = c8sectpfe_timer_interrupt;
+ fei->timer.data = (unsigned long)fei;
+
+ mutex_init(&fei->lock);
+
+ /* Get the configuration information about the tuners */
+ ret = c8sectpfe_tuner_register_frontend(&fei->c8sectpfe[0],
+ (void *)fei,
+ c8sectpfe_start_feed,
+ c8sectpfe_stop_feed);
+ if (ret) {
+ dev_err(dev, "c8sectpfe_tuner_register_frontend failed (%d)\n",
+ ret);
+ goto err_clk_disable;
+ }
+
+ /* ensure all other init has been done before requesting firmware */
+ ret = load_c8sectpfe_fw_step1(fei);
+ if (ret) {
+ dev_err(dev, "Couldn't load slim core firmware\n");
+ goto err_clk_disable;
+ }
+
+ c8sectpfe_debugfs_init(fei);
+
+ return 0;
+
+err_clk_disable:
+ /* TODO uncomment when upstream has taken a reference on this clk */
+ /*clk_disable_unprepare(fei->c8sectpfeclk);*/
+ return ret;
+}
+
+static int c8sectpfe_remove(struct platform_device *pdev)
+{
+ struct c8sectpfei *fei = platform_get_drvdata(pdev);
+ struct channel_info *channel;
+ int i;
+
+ wait_for_completion(&fei->fw_ack);
+
+ c8sectpfe_tuner_unregister_frontend(fei->c8sectpfe[0], fei);
+
+ /*
+ * Now loop through and un-configure each of the InputBlock resources
+ */
+ for (i = 0; i < fei->tsin_count; i++) {
+ channel = fei->channel_data[i];
+ free_input_block(fei, channel);
+ }
+
+ c8sectpfe_debugfs_exit(fei);
+
+ dev_info(fei->dev, "Stopping memdma SLIM core\n");
+ if (readl(fei->io + DMA_CPU_RUN))
+ writel(0x0, fei->io + DMA_CPU_RUN);
+
+ /* unclock all internal IP's */
+ if (readl(fei->io + SYS_INPUT_CLKEN))
+ writel(0, fei->io + SYS_INPUT_CLKEN);
+
+ if (readl(fei->io + SYS_OTHER_CLKEN))
+ writel(0, fei->io + SYS_OTHER_CLKEN);
+
+ /* TODO uncomment when upstream has taken a reference on this clk */
+ /*
+ if (fei->c8sectpfeclk)
+ clk_disable_unprepare(fei->c8sectpfeclk);
+ */
+
+ return 0;
+}
+
+
+static int configure_channels(struct c8sectpfei *fei)
+{
+ int index = 0, ret;
+ struct channel_info *tsin;
+ struct device_node *child, *np = fei->dev->of_node;
+
+ /* iterate round each tsin and configure memdma descriptor and IB hw */
+ for_each_child_of_node(np, child) {
+
+ tsin = fei->channel_data[index];
+
+ ret = configure_memdma_and_inputblock(fei,
+ fei->channel_data[index]);
+
+ if (ret) {
+ dev_err(fei->dev,
+ "configure_memdma_and_inputblock failed\n");
+ goto err_unmap;
+ }
+ index++;
+ }
+
+ return 0;
+
+err_unmap:
+ for (index = 0; index < fei->tsin_count; index++) {
+ tsin = fei->channel_data[index];
+ free_input_block(fei, tsin);
+ }
+ return ret;
+}
+
+static int
+c8sectpfe_elf_sanity_check(struct c8sectpfei *fei, const struct firmware *fw)
+{
+ struct elf32_hdr *ehdr;
+ char class;
+
+ if (!fw) {
+ dev_err(fei->dev, "failed to load %s\n", FIRMWARE_MEMDMA);
+ return -EINVAL;
+ }
+
+ if (fw->size < sizeof(struct elf32_hdr)) {
+ dev_err(fei->dev, "Image is too small\n");
+ return -EINVAL;
+ }
+
+ ehdr = (struct elf32_hdr *)fw->data;
+
+ /* We only support ELF32 at this point */
+ class = ehdr->e_ident[EI_CLASS];
+ if (class != ELFCLASS32) {
+ dev_err(fei->dev, "Unsupported class: %d\n", class);
+ return -EINVAL;
+ }
+
+ if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
+ dev_err(fei->dev, "Unsupported firmware endianness\n");
+ return -EINVAL;
+ }
+
+ if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) {
+ dev_err(fei->dev, "Image is too small\n");
+ return -EINVAL;
+ }
+
+ if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) {
+ dev_err(fei->dev, "Image is corrupted (bad magic)\n");
+ return -EINVAL;
+ }
+
+ /* Check ELF magic */
+ ehdr = (Elf32_Ehdr *)fw->data;
+ if (ehdr->e_ident[EI_MAG0] != ELFMAG0 ||
+ ehdr->e_ident[EI_MAG1] != ELFMAG1 ||
+ ehdr->e_ident[EI_MAG2] != ELFMAG2 ||
+ ehdr->e_ident[EI_MAG3] != ELFMAG3) {
+ dev_err(fei->dev, "Invalid ELF magic\n");
+ return -EINVAL;
+ }
+
+ if (ehdr->e_type != ET_EXEC) {
+ dev_err(fei->dev, "Unsupported ELF header type\n");
+ return -EINVAL;
+ }
+
+ if (ehdr->e_phoff > fw->size) {
+ dev_err(fei->dev, "Firmware size is too small\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
+ const struct firmware *fw, u8 __iomem *dest,
+ int seg_num)
+{
+ const u8 *imem_src = fw->data + phdr->p_offset;
+ int i;
+
+ /*
+ * For IMEM segments, the segment contains 24-bit
+ * instructions which must be padded to 32-bit
+ * instructions before being written. The written
+ * segment is padded with NOP instructions.
+ */
+
+ dev_dbg(fei->dev,
+ "Loading IMEM segment %d 0x%08x\n\t"
+ " (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num,
+ phdr->p_paddr, phdr->p_filesz,
+ dest, phdr->p_memsz + phdr->p_memsz / 3);
+
+ for (i = 0; i < phdr->p_filesz; i++) {
+
+ writeb(readb((void __iomem *)imem_src), (void __iomem *)dest);
+
+ /* Every 3 bytes, add an additional
+ * padding zero in destination */
+ if (i % 3 == 2) {
+ dest++;
+ writeb(0x00, (void __iomem *)dest);
+ }
+
+ dest++;
+ imem_src++;
+ }
+}
+
+static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr,
+ const struct firmware *fw, u8 __iomem *dst, int seg_num)
+{
+ /*
+ * For DMEM segments copy the segment data from the ELF
+ * file and pad segment with zeroes
+ */
+
+ dev_dbg(fei->dev,
+ "Loading DMEM segment %d 0x%08x\n\t"
+ "(0x%x bytes) -> 0x%p (0x%x bytes)\n",
+ seg_num, phdr->p_paddr, phdr->p_filesz,
+ dst, phdr->p_memsz);
+
+ memcpy((void __iomem *)dst, (void *)fw->data + phdr->p_offset,
+ phdr->p_filesz);
+
+ memset((void __iomem *)dst + phdr->p_filesz, 0,
+ phdr->p_memsz - phdr->p_filesz);
+}
+
+static int load_slim_core_fw(const struct firmware *fw, void *context)
+{
+ struct c8sectpfei *fei = context;
+ Elf32_Ehdr *ehdr;
+ Elf32_Phdr *phdr;
+ u8 __iomem *dst;
+ int err, i;
+
+ if (!fw || !context)
+ return -EINVAL;
+
+ ehdr = (Elf32_Ehdr *)fw->data;
+ phdr = (Elf32_Phdr *)(fw->data + ehdr->e_phoff);
+
+ /* go through the available ELF segments */
+ for (i = 0; i < ehdr->e_phnum && !err; i++, phdr++) {
+
+ /* Only consider LOAD segments */
+ if (phdr->p_type != PT_LOAD)
+ continue;
+
+ /*
+ * Check segment is contained within the fw->data buffer
+ */
+ if (phdr->p_offset + phdr->p_filesz > fw->size) {
+ dev_err(fei->dev,
+ "Segment %d is outside of firmware file\n", i);
+ err = -EINVAL;
+ break;
+ }
+
+ /*
+ * MEMDMA IMEM has executable flag set, otherwise load
+ * this segment into DMEM.
+ *
+ */
+
+ if (phdr->p_flags & PF_X) {
+ dst = (u8 __iomem *) fei->io + DMA_MEMDMA_IMEM;
+ /*
+ * The Slim ELF file uses 32-bit word addressing for
+ * load offsets.
+ */
+ dst += (phdr->p_paddr & 0xFFFFF) * sizeof(unsigned int);
+ load_imem_segment(fei, phdr, fw, dst, i);
+ } else {
+ dst = (u8 __iomem *) fei->io + DMA_MEMDMA_DMEM;
+ /*
+ * The Slim ELF file uses 32-bit word addressing for
+ * load offsets.
+ */
+ dst += (phdr->p_paddr & 0xFFFFF) * sizeof(unsigned int);
+ load_dmem_segment(fei, phdr, fw, dst, i);
+ }
+ }
+
+ release_firmware(fw);
+ return err;
+}
+
+static void load_c8sectpfe_fw_cb(const struct firmware *fw, void *context)
+{
+ struct c8sectpfei *fei = context;
+ int err;
+
+ err = c8sectpfe_elf_sanity_check(fei, fw);
+ if (err) {
+ dev_err(fei->dev, "c8sectpfe_elf_sanity_check failed err=(%d)\n"
+ , err);
+ goto err;
+ }
+
+ err = load_slim_core_fw(fw, context);
+ if (err) {
+ dev_err(fei->dev, "load_slim_core_fw failed err=(%d)\n", err);
+ goto err;
+ }
+
+ /* now the firmware is loaded configure the input blocks */
+ err = configure_channels(fei);
+ if (err) {
+ dev_err(fei->dev, "configure_channels failed err=(%d)\n", err);
+ goto err;
+ }
+
+ /*
+ * STBus target port can access IMEM and DMEM ports
+ * without waiting for CPU
+ */
+ writel(0x1, fei->io + DMA_PER_STBUS_SYNC);
+
+ dev_info(fei->dev, "Boot the memdma SLIM core\n");
+ writel(0x1, fei->io + DMA_CPU_RUN);
+
+ atomic_set(&fei->fw_loaded, 1);
+err:
+ complete_all(&fei->fw_ack);
+}
+
+static int load_c8sectpfe_fw_step1(struct c8sectpfei *fei)
+{
+ int ret;
+ int err;
+
+ dev_info(fei->dev, "Loading firmware: %s\n", FIRMWARE_MEMDMA);
+
+ init_completion(&fei->fw_ack);
+ atomic_set(&fei->fw_loaded, 0);
+
+ err = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+ FIRMWARE_MEMDMA, fei->dev, GFP_KERNEL, fei,
+ load_c8sectpfe_fw_cb);
+
+ if (err) {
+ dev_err(fei->dev, "request_firmware_nowait err: %d.\n", err);
+ complete_all(&fei->fw_ack);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id c8sectpfe_match[] = {
+ { .compatible = "st,stih407-c8sectpfe" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, c8sectpfe_match);
+
+static struct platform_driver c8sectpfe_driver = {
+ .driver = {
+ .name = "c8sectpfe",
+ .of_match_table = of_match_ptr(c8sectpfe_match),
+ },
+ .probe = c8sectpfe_probe,
+ .remove = c8sectpfe_remove,
+};
+
+module_platform_driver(c8sectpfe_driver);
+
+MODULE_AUTHOR("Peter Bennett <peter.bennett@st.com>");
+MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
+MODULE_DESCRIPTION("C8SECTPFE STi DVB Driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,288 @@
+/*
+ * c8sectpfe-core.h - C8SECTPFE STi DVB driver
+ *
+ * Copyright (c) STMicroelectronics 2015
+ *
+ * Author:Peter Bennett <peter.bennett@st.com>
+ * Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef _C8SECTPFE_CORE_H_
+#define _C8SECTPFE_CORE_H_
+
+#define C8SECTPFEI_MAXCHANNEL 16
+#define C8SECTPFEI_MAXADAPTER 3
+
+#define C8SECTPFE_MAX_TSIN_CHAN 8
+
+struct channel_info {
+
+ int tsin_id;
+ bool invert_ts_clk;
+ bool serial_not_parallel;
+ bool async_not_sync;
+ int i2c;
+ int dvb_card;
+
+ int rst_gpio;
+
+ struct i2c_adapter *i2c_adapter;
+ struct i2c_adapter *tuner_i2c;
+ struct i2c_adapter *lnb_i2c;
+ struct i2c_client *i2c_client;
+ struct dvb_frontend *frontend;
+
+ struct pinctrl_state *pstate;
+
+ int demux_mapping;
+ int active;
+
+ void *back_buffer_start;
+ void *back_buffer_aligned;
+ dma_addr_t back_buffer_busaddr;
+
+ void *pid_buffer_start;
+ void *pid_buffer_aligned;
+ dma_addr_t pid_buffer_busaddr;
+
+ unsigned long fifo;
+
+ struct completion idle_completion;
+ struct tasklet_struct tsklet;
+
+ struct c8sectpfei *fei;
+ void __iomem *irec;
+
+};
+
+struct c8sectpfe_hw {
+ int num_ib;
+ int num_mib;
+ int num_swts;
+ int num_tsout;
+ int num_ccsc;
+ int num_ram;
+ int num_tp;
+};
+
+struct c8sectpfei {
+
+ struct device *dev;
+ struct pinctrl *pinctrl;
+
+ struct dentry *root;
+ struct debugfs_regset32 *regset;
+ struct completion fw_ack;
+ atomic_t fw_loaded;
+
+ int tsin_count;
+
+ struct c8sectpfe_hw hw_stats;
+
+ struct c8sectpfe *c8sectpfe[C8SECTPFEI_MAXADAPTER];
+
+ int mapping[C8SECTPFEI_MAXCHANNEL];
+
+ struct mutex lock;
+
+ struct timer_list timer; /* timer interrupts for outputs */
+
+ void __iomem *io;
+ void __iomem *sram;
+
+ unsigned long sram_size;
+
+ struct channel_info *channel_data[C8SECTPFE_MAX_TSIN_CHAN];
+
+ struct clk *c8sectpfeclk;
+ int nima_rst_gpio;
+ int nimb_rst_gpio;
+
+ int idle_irq;
+ int error_irq;
+
+ int global_feed_count;
+};
+
+/* C8SECTPFE SYS Regs list */
+
+#define SYS_INPUT_ERR_STATUS 0x0
+#define SYS_OTHER_ERR_STATUS 0x8
+#define SYS_INPUT_ERR_MASK 0x10
+#define SYS_OTHER_ERR_MASK 0x18
+#define SYS_DMA_ROUTE 0x20
+#define SYS_INPUT_CLKEN 0x30
+#define IBENABLE_MASK 0x7F
+
+#define SYS_OTHER_CLKEN 0x38
+#define TSDMAENABLE BIT(1)
+#define MEMDMAENABLE BIT(0)
+
+#define SYS_CFG_NUM_IB 0x200
+#define SYS_CFG_NUM_MIB 0x204
+#define SYS_CFG_NUM_SWTS 0x208
+#define SYS_CFG_NUM_TSOUT 0x20C
+#define SYS_CFG_NUM_CCSC 0x210
+#define SYS_CFG_NUM_RAM 0x214
+#define SYS_CFG_NUM_TP 0x218
+
+/* Input Block Regs */
+
+#define C8SECTPFE_INPUTBLK_OFFSET 0x1000
+#define C8SECTPFE_CHANNEL_OFFSET(x) ((x*0x40) + C8SECTPFE_INPUTBLK_OFFSET)
+
+#define C8SECTPFE_IB_IP_FMT_CFG(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x00)
+#define C8SECTPFE_IGNORE_ERR_AT_SOP BIT(7)
+#define C8SECTPFE_IGNORE_ERR_IN_PKT BIT(6)
+#define C8SECTPFE_IGNORE_ERR_IN_BYTE BIT(5)
+#define C8SECTPFE_INVERT_TSCLK BIT(4)
+#define C8SECTPFE_ALIGN_BYTE_SOP BIT(3)
+#define C8SECTPFE_ASYNC_NOT_SYNC BIT(2)
+#define C8SECTPFE_BYTE_ENDIANNESS_MSB BIT(1)
+#define C8SECTPFE_SERIAL_NOT_PARALLEL BIT(0)
+
+#define C8SECTPFE_IB_SYNCLCKDRP_CFG(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x04)
+#define C8SECTPFE_SYNC(x) (x & 0xf)
+#define C8SECTPFE_DROP(x) ((x<<4) & 0xf)
+#define C8SECTPFE_TOKEN(x) ((x<<8) & 0xff00)
+#define C8SECTPFE_SLDENDIANNESS BIT(16)
+
+#define C8SECTPFE_IB_TAGBYTES_CFG(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x08)
+#define C8SECTPFE_TAG_HEADER(x) (x << 16)
+#define C8SECTPFE_TAG_COUNTER(x) ((x<<1) & 0x7fff)
+#define C8SECTPFE_TAG_ENABLE BIT(0)
+
+#define C8SECTPFE_IB_PID_SET(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x0C)
+#define C8SECTPFE_PID_OFFSET(x) (x & 0x3f)
+#define C8SECTPFE_PID_NUMBITS(x) ((x << 6) & 0xfff)
+#define C8SECTPFE_PID_ENABLE BIT(31)
+
+#define C8SECTPFE_IB_PKT_LEN(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x10)
+
+#define C8SECTPFE_IB_BUFF_STRT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x14)
+#define C8SECTPFE_IB_BUFF_END(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x18)
+#define C8SECTPFE_IB_READ_PNT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x1C)
+#define C8SECTPFE_IB_WRT_PNT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x20)
+
+#define C8SECTPFE_IB_PRI_THRLD(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x24)
+#define C8SECTPFE_PRI_VALUE(x) (x & 0x7fffff)
+#define C8SECTPFE_PRI_LOWPRI(x) ((x & 0xf) << 24)
+#define C8SECTPFE_PRI_HIGHPRI(x) ((x & 0xf) << 28)
+
+#define C8SECTPFE_IB_STAT(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x28)
+#define C8SECTPFE_STAT_FIFO_OVERFLOW(x) (x & 0x1)
+#define C8SECTPFE_STAT_BUFFER_OVERFLOW(x) (x & 0x2)
+#define C8SECTPFE_STAT_OUTOFORDERRP(x) (x & 0x4)
+#define C8SECTPFE_STAT_PID_OVERFLOW(x) (x & 0x8)
+#define C8SECTPFE_STAT_PKT_OVERFLOW(x) (x & 0x10)
+#define C8SECTPFE_STAT_ERROR_PACKETS(x) ((x >> 8) & 0xf)
+#define C8SECTPFE_STAT_SHORT_PACKETS(x) ((x >> 12) & 0xf)
+
+#define C8SECTPFE_IB_MASK(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x2C)
+#define C8SECTPFE_MASK_FIFO_OVERFLOW BIT(0)
+#define C8SECTPFE_MASK_BUFFER_OVERFLOW BIT(1)
+#define C8SECTPFE_MASK_OUTOFORDERRP(x) BIT(2)
+#define C8SECTPFE_MASK_PID_OVERFLOW(x) BIT(3)
+#define C8SECTPFE_MASK_PKT_OVERFLOW(x) BIT(4)
+#define C8SECTPFE_MASK_ERROR_PACKETS(x) ((x & 0xf) << 8)
+#define C8SECTPFE_MASK_SHORT_PACKETS(x) ((x & 0xf) >> 12)
+
+#define C8SECTPFE_IB_SYS(x) (C8SECTPFE_CHANNEL_OFFSET(x) + 0x30)
+#define C8SECTPFE_SYS_RESET BIT(1)
+#define C8SECTPFE_SYS_ENABLE BIT(0)
+
+/*
+ * Ponter record data structure required for each input block
+ * see Table 82 on page 167 of functional specification.
+ */
+
+#define DMA_PRDS_MEMBASE 0x0 /* Internal sram base address */
+#define DMA_PRDS_MEMTOP 0x4 /* Internal sram top address */
+
+/*
+ * TS packet size, including tag bytes added by input block,
+ * rounded up to the next multiple of 8 bytes. The packet size,
+ * including any tagging bytes and rounded up to the nearest
+ * multiple of 8 bytes must be less than 255 bytes.
+ */
+#define DMA_PRDS_PKTSIZE 0x8
+#define DMA_PRDS_TPENABLE 0xc
+
+#define TP0_OFFSET 0x10
+#define DMA_PRDS_BUSBASE_TP(x) ((0x10*x) + TP0_OFFSET)
+#define DMA_PRDS_BUSTOP_TP(x) ((0x10*x) + TP0_OFFSET + 0x4)
+#define DMA_PRDS_BUSWP_TP(x) ((0x10*x) + TP0_OFFSET + 0x8)
+#define DMA_PRDS_BUSRP_TP(x) ((0x10*x) + TP0_OFFSET + 0xc)
+
+#define DMA_PRDS_SIZE (0x20)
+
+#define DMA_MEMDMA_OFFSET 0x4000
+#define DMA_IMEM_OFFSET 0x0
+#define DMA_DMEM_OFFSET 0x4000
+#define DMA_CPU 0x8000
+#define DMA_PER_OFFSET 0xb000
+
+#define DMA_MEMDMA_DMEM (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET)
+#define DMA_MEMDMA_IMEM (DMA_MEMDMA_OFFSET + DMA_IMEM_OFFSET)
+
+/* XP70 Slim core regs */
+#define DMA_CPU_ID (DMA_MEMDMA_OFFSET + DMA_CPU + 0x0)
+#define DMA_CPU_VCR (DMA_MEMDMA_OFFSET + DMA_CPU + 0x4)
+#define DMA_CPU_RUN (DMA_MEMDMA_OFFSET + DMA_CPU + 0x8)
+#define DMA_CPU_CLOCKGATE (DMA_MEMDMA_OFFSET + DMA_CPU + 0xc)
+#define DMA_CPU_PC (DMA_MEMDMA_OFFSET + DMA_CPU + 0x20)
+
+/* Enable Interrupt for a IB */
+#define DMA_PER_TPn_DREQ_MASK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xd00)
+/* Ack interrupt by setting corresponding bit */
+#define DMA_PER_TPn_DACK_SET (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xd80)
+#define DMA_PER_TPn_DREQ (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xe00)
+#define DMA_PER_TPn_DACK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xe80)
+#define DMA_PER_DREQ_MODE (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf80)
+#define DMA_PER_STBUS_SYNC (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf88)
+#define DMA_PER_STBUS_ACCESS (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf8c)
+#define DMA_PER_STBUS_ADDRESS (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xf90)
+#define DMA_PER_IDLE_INT (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfa8)
+#define DMA_PER_PRIORITY (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfac)
+#define DMA_PER_MAX_OPCODE (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfb0)
+#define DMA_PER_MAX_CHUNK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfb4)
+#define DMA_PER_PAGE_SIZE (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfbc)
+#define DMA_PER_MBOX_STATUS (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfc0)
+#define DMA_PER_MBOX_SET (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfc8)
+#define DMA_PER_MBOX_CLEAR (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfd0)
+#define DMA_PER_MBOX_MASK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfd8)
+#define DMA_PER_INJECT_PKT_SRC (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfe0)
+#define DMA_PER_INJECT_PKT_DEST (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfe4)
+#define DMA_PER_INJECT_PKT_ADDR (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfe8)
+#define DMA_PER_INJECT_PKT (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xfec)
+#define DMA_PER_PAT_PTR_INIT (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xff0)
+#define DMA_PER_PAT_PTR (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xff4)
+#define DMA_PER_SLEEP_MASK (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xff8)
+#define DMA_PER_SLEEP_COUNTER (DMA_MEMDMA_OFFSET + DMA_PER_OFFSET + 0xffc)
+/* #define DMA_RF_CPUREGn DMA_RFBASEADDR n=0 to 15) slim regsa */
+
+/* The following are from DMA_DMEM_BaseAddress */
+#define DMA_FIRMWARE_VERSION (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x0)
+#define DMA_PTRREC_BASE (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x4)
+#define DMA_PTRREC_INPUT_OFFSET (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x8)
+#define DMA_ERRREC_BASE (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0xc)
+#define DMA_ERROR_RECORD(n) ((n*4) + DMA_ERRREC_BASE + 0x4)
+#define DMA_IDLE_REQ (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x10)
+#define IDLEREQ BIT(31)
+
+#define DMA_FIRMWARE_CONFIG (DMA_MEMDMA_OFFSET + DMA_DMEM_OFFSET + 0x14)
+
+/* Regs for PID Filter */
+
+#define PIDF_OFFSET 0x2800
+#define PIDF_BASE(n) ((n*4) + PIDF_OFFSET)
+#define PIDF_LEAK_ENABLE (PIDF_OFFSET + 0x100)
+#define PIDF_LEAK_STATUS (PIDF_OFFSET + 0x108)
+#define PIDF_LEAK_COUNT_RESET (PIDF_OFFSET + 0x110)
+#define PIDF_LEAK_COUNTER (PIDF_OFFSET + 0x114)
+
+#endif /* _C8SECTPFE_CORE_H_ */
This patch adds support for the c8sectpfe input HW found on STiH407/410 SoC's. It currently supports the TS input block, memdma engine and hw PID filtering blocks of the C8SECTPFE subsystem. The driver creates one LinuxDVB adapter, and a demux/dvr/frontend set of devices for each tsin channel which is specificed in the DT. It has been tested with multiple tsin channels tuned, locked, and grabbing TS simultaneously. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- .../media/platform/sti/c8sectpfe/c8sectpfe-core.c | 1235 ++++++++++++++++++++ .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 288 +++++ 2 files changed, 1523 insertions(+) create mode 100644 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c create mode 100644 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h