diff mbox series

pinctrl: qcom: qcm2290: Add GPIO wakeirq map

Message ID 20211122080938.20623-1-shawn.guo@linaro.org
State Accepted
Commit c981a789446bc267ae984f080f271685189137d4
Headers show
Series pinctrl: qcom: qcm2290: Add GPIO wakeirq map | expand

Commit Message

Shawn Guo Nov. 22, 2021, 8:09 a.m. UTC 
It adds the map of wakeup capable GPIOs and the pins at MPM wake
controller on QCM2290, so that these GPIOs can wake up the SoC from
vlow/vmin low power mode.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/pinctrl/qcom/pinctrl-qcm2290.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-qcm2290.c b/drivers/pinctrl/qcom/pinctrl-qcm2290.c
index 3f05c0a24b79..aa9325f333fb 100644
--- a/drivers/pinctrl/qcom/pinctrl-qcm2290.c
+++ b/drivers/pinctrl/qcom/pinctrl-qcm2290.c
@@ -1083,6 +1083,16 @@  static const struct msm_pingroup qcm2290_groups[] = {
 	[133] = SDC_QDSD_PINGROUP(sdc2_data, 0x86000, 9, 0),
 };
 
+static const struct msm_gpio_wakeirq_map qcm2290_mpm_map[] = {
+	{ 0, 84 }, { 3, 75 }, { 4, 16 }, { 6, 59 }, { 8, 63 }, { 11, 17 },
+	{ 13, 18 }, { 14, 51 }, { 17, 20 }, { 18, 52 }, { 19, 53 }, { 24, 6 },
+	{ 25, 71 }, { 27, 73 }, { 28, 41 }, { 31, 27 }, { 32, 54 }, { 33, 55 },
+	{ 34, 56 }, { 35, 57 }, { 36, 58 }, { 39, 28 }, { 46, 29 }, { 62, 60 },
+	{ 63, 61 }, { 64, 62 }, { 69, 33 }, { 70, 34 }, { 72, 72 }, { 75, 35 },
+	{ 79, 36 }, { 80, 21 }, { 81, 38 }, { 86, 19 }, { 87, 42 }, { 88, 43 },
+	{ 89, 45 }, { 91, 74 }, { 94, 47 }, { 95, 48 }, { 96, 49 }, { 97, 50 },
+};
+
 static const struct msm_pinctrl_soc_data qcm2290_pinctrl = {
 	.pins = qcm2290_pins,
 	.npins = ARRAY_SIZE(qcm2290_pins),
@@ -1091,6 +1101,8 @@  static const struct msm_pinctrl_soc_data qcm2290_pinctrl = {
 	.groups = qcm2290_groups,
 	.ngroups = ARRAY_SIZE(qcm2290_groups),
 	.ngpios = 127,
+	.wakeirq_map = qcm2290_mpm_map,
+	.nwakeirq_map = ARRAY_SIZE(qcm2290_mpm_map),
 };
 
 static int qcm2290_pinctrl_probe(struct platform_device *pdev)