| Message ID | 20211115084203.56478-6-tony@atomide.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/7] serial: core: Add support of runtime PM | expand |
On Mon, Nov 15, 2021 at 10:42:01AM +0200, Tony Lindgren wrote: > For deeper idle states the 8250 device gets powered off. The wakeup is > handled with a separate wakeirq controller monitoring the RX pin. > > Let's check for a valid wakeirq before enabling deeper idle states. > > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > drivers/tty/serial/8250/8250_omap.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c > --- a/drivers/tty/serial/8250/8250_omap.c > +++ b/drivers/tty/serial/8250/8250_omap.c > @@ -133,6 +133,7 @@ struct omap8250_priv { > spinlock_t rx_dma_lock; > bool rx_dma_broken; > bool throttled; > + unsigned int allow_rpm:1; > }; > > struct omap8250_dma_params { > @@ -676,6 +677,7 @@ static int omap_8250_startup(struct uart_port *port) > ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq); > if (ret) > return ret; > + priv->allow_rpm = 1; > } > > pm_runtime_get_sync(port->dev); Note that you still have synchronous resumes here despite this function being called in atomic context. It didn't look like these were removed by the next patch that drops irq_safe. > @@ -722,6 +724,10 @@ static int omap_8250_startup(struct uart_port *port) > if (up->dma && !(priv->habit & UART_HAS_EFR2)) > up->dma->rx_dma(up); > > + /* Block runtime PM if no wakeirq, paired with shutdown */ > + if (!priv->allow_rpm) > + pm_runtime_get_noresume(port->dev); > + > pm_runtime_mark_last_busy(port->dev); > pm_runtime_put_autosuspend(port->dev); > return 0; > @@ -760,6 +766,10 @@ static void omap_8250_shutdown(struct uart_port *port) > serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC); > serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); > > + /* Clear possible PM runtime block to pair with startup */ > + if (!priv->allow_rpm) > + pm_runtime_put_noidle(port->dev); > + > pm_runtime_mark_last_busy(port->dev); > pm_runtime_put_autosuspend(port->dev); > free_irq(port->irq, port); Johan
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -133,6 +133,7 @@ struct omap8250_priv { spinlock_t rx_dma_lock; bool rx_dma_broken; bool throttled; + unsigned int allow_rpm:1; }; struct omap8250_dma_params { @@ -676,6 +677,7 @@ static int omap_8250_startup(struct uart_port *port) ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq); if (ret) return ret; + priv->allow_rpm = 1; } pm_runtime_get_sync(port->dev); @@ -722,6 +724,10 @@ static int omap_8250_startup(struct uart_port *port) if (up->dma && !(priv->habit & UART_HAS_EFR2)) up->dma->rx_dma(up); + /* Block runtime PM if no wakeirq, paired with shutdown */ + if (!priv->allow_rpm) + pm_runtime_get_noresume(port->dev); + pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); return 0; @@ -760,6 +766,10 @@ static void omap_8250_shutdown(struct uart_port *port) serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC); serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + /* Clear possible PM runtime block to pair with startup */ + if (!priv->allow_rpm) + pm_runtime_put_noidle(port->dev); + pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); free_irq(port->irq, port);
For deeper idle states the 8250 device gets powered off. The wakeup is handled with a separate wakeirq controller monitoring the RX pin. Let's check for a valid wakeirq before enabling deeper idle states. Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/tty/serial/8250/8250_omap.c | 10 ++++++++++ 1 file changed, 10 insertions(+)