@@ -29,6 +29,36 @@ &clkmgr {
compatible = "intel,easic-n5x-clkmgr";
};
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
&mmc {
status = "okay";
cap-sd-highspeed;
@@ -40,10 +70,51 @@ &osc1 {
clock-frequency = <25000000>;
};
+&qspi {
+ status = "okay";
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt25qu02g", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <2>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qspi_boot: partition@0 {
+ label = "Boot and fpga data";
+ reg = <0x0 0x03FE0000>;
+ };
+
+ qspi_rootfs: partition@3FE0000 {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x03FE0000 0x0C020000>;
+ };
+ };
+ };
+};
+
&uart0 {
status = "okay";
};
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
&watchdog0 {
status = "okay";
};
Populate the N5X board dts file with support for QSPI, USB, and ethernet. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- .../boot/dts/intel/socfpga_n5x_socdk.dts | 71 +++++++++++++++++++ 1 file changed, 71 insertions(+)