diff mbox series

[v3,06/20] ASoC: tegra20-spdif: stop setting slave_id

Message ID 20211202162341.1791-7-digetx@gmail.com
State Superseded
Headers show
Series None | expand

Commit Message

Dmitry Osipenko Dec. 2, 2021, 4:23 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

The DMA resource is never set up anywhere, and passing this as slave_id
has not been the proper procedure in a long time.

As a preparation for removing all slave_id references from the ALSA code,
remove this one.

According to Dmitry Osipenko, this driver has never been used and
the mechanism for configuring DMA would not work as it is implemented,
so this part will get rewritten when the driver gets put into use
again in the future.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 sound/soc/tegra/tegra20_spdif.c | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
index 6f0570cde964..e45e371edc42 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -298,7 +298,6 @@  static int tegra20_spdif_platform_probe(struct platform_device *pdev)
 	spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
 	spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	spdif->playback_dma_data.maxburst = 4;
-	spdif->playback_dma_data.slave_id = dmareq->start;
 
 	pm_runtime_enable(&pdev->dev);