@@ -385,6 +385,7 @@ struct ath11k_sta {
u64 rx_duration;
u64 tx_duration;
u8 rssi_comb;
+ s8 rssi_beacon;
s8 chain_signal[IEEE80211_MAX_CHAINS];
struct ath11k_htt_tx_stats *tx_stats;
struct ath11k_rx_peer_stats *rx_stats;
@@ -7811,6 +7811,9 @@ static void ath11k_mac_op_sta_statistics(struct ieee80211_hw *hw,
{
struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
struct ath11k *ar = arsta->arvif->ar;
+ s8 signal;
+ bool db2dbm = test_bit(WMI_TLV_SERVICE_HW_DB2DBM_CONVERSION_SUPPORT,
+ ar->ab->wmi_ab.svc_map);
sinfo->rx_duration = arsta->rx_duration;
sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
@@ -7843,9 +7846,22 @@ static void ath11k_mac_op_sta_statistics(struct ieee80211_hw *hw,
ath11k_mac_put_chain_rssi(sinfo, arsta, "fw stats", true);
}
- /* TODO: Use real NF instead of default one. */
- sinfo->signal = arsta->rssi_comb + ATH11K_DEFAULT_NOISE_FLOOR;
- sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
+ signal = arsta->rssi_comb;
+ if (!signal &&
+ arsta->arvif->vdev_type == WMI_VDEV_TYPE_STA &&
+ ar->ab->hw_params.supports_rssi_stats &&
+ !(ath11k_debugfs_get_fw_stats(ar, ar->pdev->pdev_id, 0,
+ WMI_REQUEST_VDEV_STAT)))
+ signal = arsta->rssi_beacon;
+
+ ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+ "mac sta statistics db2dbm %u rssi comb %d rssi beacon %d\n",
+ db2dbm, arsta->rssi_comb, arsta->rssi_beacon);
+
+ if (signal) {
+ sinfo->signal = db2dbm ? signal : signal + ATH11K_DEFAULT_NOISE_FLOOR;
+ sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
+ }
}
static const struct ieee80211_ops ath11k_ops = {
@@ -5639,7 +5639,11 @@ static int ath11k_wmi_tlv_fw_stats_data_parse(struct ath11k_base *ab,
{
struct ath11k_fw_stats *stats = parse->stats;
const struct wmi_stats_event *ev = parse->ev;
- int i;
+ struct ath11k *ar;
+ struct ath11k_vif *arvif;
+ struct ieee80211_sta *sta;
+ struct ath11k_sta *arsta;
+ int i, ret = 0;
const void *data = ptr;
if (!ev) {
@@ -5649,13 +5653,19 @@ static int ath11k_wmi_tlv_fw_stats_data_parse(struct ath11k_base *ab,
stats->stats_id = 0;
+ rcu_read_lock();
+
+ ar = ath11k_mac_get_ar_by_pdev_id(ab, ev->pdev_id);
+
for (i = 0; i < ev->num_pdev_stats; i++) {
const struct wmi_pdev_stats *src;
struct ath11k_fw_stats_pdev *dst;
src = data;
- if (len < sizeof(*src))
- return -EPROTO;
+ if (len < sizeof(*src)) {
+ ret = -EPROTO;
+ goto exit;
+ }
stats->stats_id = WMI_REQUEST_PDEV_STAT;
@@ -5677,11 +5687,30 @@ static int ath11k_wmi_tlv_fw_stats_data_parse(struct ath11k_base *ab,
struct ath11k_fw_stats_vdev *dst;
src = data;
- if (len < sizeof(*src))
- return -EPROTO;
+ if (len < sizeof(*src)) {
+ ret = -EPROTO;
+ goto exit;
+ }
stats->stats_id = WMI_REQUEST_VDEV_STAT;
+ arvif = ath11k_mac_get_arvif(ar, src->vdev_id);
+ if (arvif) {
+ sta = ieee80211_find_sta_by_ifaddr(ar->hw,
+ arvif->bssid,
+ NULL);
+ if (sta) {
+ arsta = (struct ath11k_sta *)sta->drv_priv;
+ arsta->rssi_beacon = src->beacon_snr;
+ ath11k_dbg(ab, ATH11K_DBG_WMI,
+ "wmi stats vdev id %d snr %d\n",
+ src->vdev_id, src->beacon_snr);
+ } else {
+ ath11k_warn(ab, "not found station for bssid %pM\n",
+ arvif->bssid);
+ }
+ }
+
data += sizeof(*src);
len -= sizeof(*src);
@@ -5698,8 +5727,10 @@ static int ath11k_wmi_tlv_fw_stats_data_parse(struct ath11k_base *ab,
struct ath11k_fw_stats_bcn *dst;
src = data;
- if (len < sizeof(*src))
- return -EPROTO;
+ if (len < sizeof(*src)) {
+ ret = -EPROTO;
+ goto exit;
+ }
stats->stats_id = WMI_REQUEST_BCN_STAT;
@@ -5714,7 +5745,9 @@ static int ath11k_wmi_tlv_fw_stats_data_parse(struct ath11k_base *ab,
list_add_tail(&dst->list, &stats->bcn);
}
- return 0;
+exit:
+ rcu_read_unlock();
+ return ret;
}
static int ath11k_wmi_tlv_fw_stats_parse(struct ath11k_base *ab,
IEEE80211_HW_USES_RSS is set in ath11k, then the device uses RSS and thus requires parallel RX which implies using per-CPU station statistics in sta_get_last_rx_stats() of mac80211. Currently signal is only set in ath11k_mgmt_rx_event(), and not set for RX data packet, then it show signal as 0 for iw command easily. Change to get signal from firmware and report to mac80211. For QCA6390 and WCN6855, the rssi value is already in dbm unit, so don't need to convert it again. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- v2: 1. rebased to ath.git ath-202112141538 2. change commit log depends on patch "[v6] ath11k: report rssi of each chain to mac80211 for QCA6390/WCN6855" https://patchwork.kernel.org/project/linux-wireless/patch/20211215090944.19729-1-quic_wgong@quicinc.com/ drivers/net/wireless/ath/ath11k/core.h | 1 + drivers/net/wireless/ath/ath11k/mac.c | 22 ++++++++++-- drivers/net/wireless/ath/ath11k/wmi.c | 49 +++++++++++++++++++++----- 3 files changed, 61 insertions(+), 11 deletions(-) base-commit: f21e9b6adc354bfa274d4510df602f081a08194e prerequisite-patch-id: ea323ac33f40186a1950044c1997e9c4509c5725