| Message ID | 1440784362-31217-3-git-send-email-peter.griffin@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Fri, 28 Aug 2015, Peter Griffin wrote: > This patch adds in the required DT node for the c8sectpfe > Linux DVB demux driver which allows the tsin channels > to be used on an upstream kernel. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > arch/arm/boot/dts/stihxxx-b2120.dtsi | 35 +++++++++++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi > index 62994ae..f9fca10 100644 > --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi > +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi > @@ -6,6 +6,9 @@ > * it under the terms of the GNU General Public License version 2 as > * published by the Free Software Foundation. > */ > + > +#include <dt-bindings/clock/stih407-clks.h> > +#include <dt-bindings/media/c8sectpfe.h> > / { > soc { > sbc_serial0: serial@9530000 { > @@ -85,5 +88,37 @@ > status = "okay"; > }; > > + demux@08a20000 { > + compatible = "st,stih407-c8sectpfe"; > + status = "okay"; > + reg = <0x08a20000 0x10000>, > + <0x08a00000 0x4000>; > + reg-names = "c8sectpfe", "c8sectpfe-ram"; > + interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, > + <GIC_SPI 35 IRQ_TYPE_NONE>; > + interrupt-names = "c8sectpfe-error-irq", > + "c8sectpfe-idle-irq"; > + pinctrl-0 = <&pinctrl_tsin0_serial>; > + pinctrl-1 = <&pinctrl_tsin0_parallel>; > + pinctrl-2 = <&pinctrl_tsin3_serial>; > + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; > + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; > + pinctrl-names = "tsin0-serial", > + "tsin0-parallel", > + "tsin3-serial", > + "tsin4-serial", > + "tsin5-serial"; > + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; > + clock-names = "c8sectpfe"; > + > + /* tsin0 is TSA on NIMA */ > + tsin0: port@0 { > + tsin-num = <0>; > + serial-not-parallel; > + i2c-bus = <&ssc2>; > + rst-gpio = <&pio15 4 GPIO_ACTIVE_HIGH>; > + dvb-card = <STV0367_TDA18212_NIMA_1>; > + }; > + }; > }; > };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 62994ae..f9fca10 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -6,6 +6,9 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih407-clks.h> +#include <dt-bindings/media/c8sectpfe.h> / { soc { sbc_serial0: serial@9530000 { @@ -85,5 +88,37 @@ status = "okay"; }; + demux@08a20000 { + compatible = "st,stih407-c8sectpfe"; + status = "okay"; + reg = <0x08a20000 0x10000>, + <0x08a00000 0x4000>; + reg-names = "c8sectpfe", "c8sectpfe-ram"; + interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, + <GIC_SPI 35 IRQ_TYPE_NONE>; + interrupt-names = "c8sectpfe-error-irq", + "c8sectpfe-idle-irq"; + pinctrl-0 = <&pinctrl_tsin0_serial>; + pinctrl-1 = <&pinctrl_tsin0_parallel>; + pinctrl-2 = <&pinctrl_tsin3_serial>; + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; + pinctrl-names = "tsin0-serial", + "tsin0-parallel", + "tsin3-serial", + "tsin4-serial", + "tsin5-serial"; + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; + clock-names = "c8sectpfe"; + + /* tsin0 is TSA on NIMA */ + tsin0: port@0 { + tsin-num = <0>; + serial-not-parallel; + i2c-bus = <&ssc2>; + rst-gpio = <&pio15 4 GPIO_ACTIVE_HIGH>; + dvb-card = <STV0367_TDA18212_NIMA_1>; + }; + }; }; };
This patch adds in the required DT node for the c8sectpfe Linux DVB demux driver which allows the tsin channels to be used on an upstream kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- arch/arm/boot/dts/stihxxx-b2120.dtsi | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)