@@ -812,6 +812,12 @@ bool ath11k_hw_supports_6g_cc_ext(struct ath11k *ar)
return ath11k_hw_supports_cc_ext(ar->ab) && ar->supports_6ghz;
}
+bool ath11k_hw_supports_tpc_ext(struct ath11k *ar)
+{
+ return ath11k_hw_supports_6g_cc_ext(ar) &&
+ test_bit(WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT, ar->ab->wmi_ab.svc_map);
+}
+
const struct ath11k_hw_ops ipq8074_ops = {
.get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id,
.wmi_init_config = ath11k_init_wmi_config_ipq8074,
@@ -279,6 +279,7 @@ static inline int ath11k_hw_mac_id_to_srng_id(struct ath11k_hw_params *hw,
bool ath11k_hw_supports_cc_ext(struct ath11k_base *ab);
bool ath11k_hw_supports_6g_cc_ext(struct ath11k *ar);
+bool ath11k_hw_supports_tpc_ext(struct ath11k *ar);
struct ath11k_fw_ie {
__le32 id;
@@ -3078,6 +3078,16 @@ static int ath11k_mac_config_obss_pd(struct ath11k *ar,
return 0;
}
+static bool ath11k_mac_supports_station_tpc(struct ath11k *ar,
+ struct ath11k_vif *arvif,
+ const struct cfg80211_chan_def *chandef)
+{
+ return ath11k_hw_supports_tpc_ext(ar) &&
+ arvif->vdev_type == WMI_VDEV_TYPE_STA &&
+ chandef->chan &&
+ chandef->chan->band == NL80211_BAND_6GHZ;
+}
+
static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
@@ -3268,8 +3278,13 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
ath11k_dbg(ar->ab, ATH11K_DBG_MAC, "mac vdev_id %i txpower %d\n",
arvif->vdev_id, info->txpower);
- arvif->txpower = info->txpower;
- ath11k_mac_txpower_recalc(ar);
+ if (ath11k_mac_supports_station_tpc(ar, arvif, &info->chandef)) {
+ ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+ "discard tx power, change to set TPC power\n");
+ } else {
+ arvif->txpower = info->txpower;
+ ath11k_mac_txpower_recalc(ar);
+ }
}
if (changed & BSS_CHANGED_PS &&
When station is connected to a 6 GHz AP, it has 2 way to configure the power limit to firmware. The first way is to send 2 wmi command WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which include more parameters for power control. When firmware support SERVICE_EXT_TPC_REG, it means firmware support the second way for WMI_VDEV_SET_TPC_POWER_CMDID, then ath11k discard BSS_CHANGED_TXPOWER flag from mac80211 which is used to the first way for 6 GHz band in this patch and select the second way in the subsequent patch. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> --- drivers/net/wireless/ath/ath11k/hw.c | 6 ++++++ drivers/net/wireless/ath/ath11k/hw.h | 1 + drivers/net/wireless/ath/ath11k/mac.c | 19 +++++++++++++++++-- 3 files changed, 24 insertions(+), 2 deletions(-)