diff mbox series

arm64: dts: broadcom: bcm4908: use proper TWD binding

Message ID 20211229102314.5423-1-zajec5@gmail.com
State New
Headers show
Series arm64: dts: broadcom: bcm4908: use proper TWD binding | expand

Commit Message

Rafał Miłecki Dec. 29, 2021, 10:23 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
reset. Actual timers happen to be at block beginning but they only span
across the first 0x28 registers. It means the old block description was
incorrect (size 0x3c).

Drop timers binding for now and use documented TWD binding. Timers
should be properly documented and defined as TWD subnode.

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 984c737fa627..6e738f2a3701 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -273,9 +273,9 @@  bus@ff800000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0xff800000 0x3000>;
 
-		timer: timer@400 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x400 0x3c>;
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
 		};
 
 		gpio0: gpio-controller@500 {
@@ -330,7 +330,7 @@  reset-controller@2644 {
 
 	reboot {
 		compatible = "syscon-reboot";
-		regmap = <&timer>;
+		regmap = <&twd>;
 		offset = <0x34>;
 		mask = <1>;
 	};