@@ -363,16 +363,16 @@ static const struct sunxi_desc_pin h616_pins[] = {
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
SUNXI_FUNCTION(0x2, "uart2"), /* CTS */
- SUNXI_FUNCTION(0x3, "i2s3"), /* DO0 */
+ SUNXI_FUNCTION(0x3, "i2s3_dout0"), /* DO0 */
SUNXI_FUNCTION(0x4, "spi1"), /* MISO */
- SUNXI_FUNCTION(0x5, "i2s3"), /* DI1 */
+ SUNXI_FUNCTION(0x5, "i2s3_din1"), /* DI1 */
SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 8)), /* PH_EINT8 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 9),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x3, "i2s3"), /* DI0 */
+ SUNXI_FUNCTION(0x3, "i2s3_din0"), /* DI0 */
SUNXI_FUNCTION(0x4, "spi1"), /* CS1 */
- SUNXI_FUNCTION(0x3, "i2s3"), /* DO1 */
+ SUNXI_FUNCTION(0x5, "i2s3_dout1"), /* DO1 */
SUNXI_FUNCTION_IRQ_BANK(0x6, 6, 9)), /* PH_EINT9 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 10),
SUNXI_FUNCTION(0x0, "gpio_in"),
Two bugs have sneaked in the H616 pinctrl data: - PH9 uses the mux value of 0x3 twice (one should be 0x5 instead) - PH8 and PH9 use the "i2s3" function name twice in each pin For the double pin name we use the same trick we pulled for i2s0: append the pin function to the group name to designate the special function. Fixes: 25adc29407fb ("pinctrl: sunxi: Add support for the Allwinner H616 pin controller") Reported-by: SASANO Takayoshi <uaa@mx5.nisiq.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)