| Message ID | 20220112194118.178026-13-luca@z3ntu.xyz |
|---|---|
| State | New |
| Headers | show |
| Series | Initial MSM8953 & Fairphone 3 support | expand |
On Wed 12 Jan 13:41 CST 2022, Luca Weiss wrote: > From: Vladimir Lypak <vladimir.lypak@gmail.com> > > Snapdragon 632 is based on msm8953, add the devicee tree for that. > The commit message is a little bit thin on details about the change. > Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > arch/arm64/boot/dts/qcom/sdm632.dtsi | 125 +++++++++++++++++++++++++++ > 1 file changed, 125 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sdm632.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi > new file mode 100644 > index 000000000000..b80ba8a5ef3f > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ > + > +#include "msm8953.dtsi" > + > +/ { > + thermal-zones { > + /delete-node/cpu0-thermal; Below you replace cpu[4-7]-thermal. What about cpu[0-3]-thermal? And I would prefer the answer to be documented in the commit message. Regards, Bjorn > + /delete-node/cpu1-thermal; > + /delete-node/cpu2-thermal; > + /delete-node/cpu3-thermal; > + /delete-node/cpu4-thermal; > + /delete-node/cpu5-thermal; > + /delete-node/cpu6-thermal; > + /delete-node/cpu7-thermal; > + cpu4-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsens0 5>; > + trips { > + cpu4_alert: trip-point0 { > + temperature = <80000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu4_crit: crit { > + temperature = <100000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + map0 { > + trip = <&cpu4_alert>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + cpu5-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsens0 6>; > + trips { > + cpu5_alert: trip-point0 { > + temperature = <80000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu5_crit: crit { > + temperature = <100000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + map0 { > + trip = <&cpu5_alert>; > + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + cpu6-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsens0 7>; > + trips { > + cpu6_alert: trip-point0 { > + temperature = <80000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu6_crit: crit { > + temperature = <100000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + map0 { > + trip = <&cpu6_alert>; > + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + cpu7-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsens0 8>; > + trips { > + cpu7_alert: trip-point0 { > + temperature = <80000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu7_crit: crit { > + temperature = <100000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + map0 { > + trip = <&cpu7_alert>; > + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + }; > +}; > + > +&CPU4 { > + capacity-dmips-mhz = <1980>; > +}; > + > +&CPU5 { > + capacity-dmips-mhz = <1980>; > +}; > + > +&CPU6 { > + capacity-dmips-mhz = <1980>; > +}; > + > +&CPU7 { > + capacity-dmips-mhz = <1980>; > +}; > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi new file mode 100644 index 000000000000..b80ba8a5ef3f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include "msm8953.dtsi" + +/ { + thermal-zones { + /delete-node/cpu0-thermal; + /delete-node/cpu1-thermal; + /delete-node/cpu2-thermal; + /delete-node/cpu3-thermal; + /delete-node/cpu4-thermal; + /delete-node/cpu5-thermal; + /delete-node/cpu6-thermal; + /delete-node/cpu7-thermal; + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 5>; + trips { + cpu4_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu4_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 6>; + trips { + cpu5_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu5_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 7>; + trips { + cpu6_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu6_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 8>; + trips { + cpu7_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu7_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&CPU4 { + capacity-dmips-mhz = <1980>; +}; + +&CPU5 { + capacity-dmips-mhz = <1980>; +}; + +&CPU6 { + capacity-dmips-mhz = <1980>; +}; + +&CPU7 { + capacity-dmips-mhz = <1980>; +};