@@ -51,10 +51,12 @@
#define LLCC_TRP_SCID_DIS_CAP_ALLOC 0x21f00
#define LLCC_TRP_PCB_ACT 0x21f04
#define LLCC_TRP_WRSC_EN 0x21f20
+#define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c
#define BANK_OFFSET_STRIDE 0x80000
#define LLCC_VERSION_2_0_0_0 0x02000000
+#define LLCC_VERSION_2_1_0_0 0x02010000
/**
* struct llcc_slice_config - Data associated with the llcc slice
@@ -80,6 +82,8 @@
* collapse.
* @activate_on_init: Activate the slice immediately after it is programmed
* @write_scid_en: Bit enables write cache support for a given scid.
+ * @write_scid_cacheable_en: Enables write cache cacheable support for a
+ * given scid (not supported on v2 or older hardware).
*/
struct llcc_slice_config {
u32 usecase_id;
@@ -95,6 +99,7 @@ struct llcc_slice_config {
bool retain_on_pc;
bool activate_on_init;
bool write_scid_en;
+ bool write_scid_cacheable_en;
};
struct qcom_llcc_config {
@@ -515,6 +520,16 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
return ret;
}
+ if (drv_data->version >= LLCC_VERSION_2_1_0_0) {
+ u32 wr_cache_en;
+
+ wr_cache_en = config->write_scid_cacheable_en << config->slice_id;
+ ret = regmap_update_bits(drv_data->bcast_regmap, LLCC_TRP_WRSC_CACHEABLE_EN,
+ BIT(config->slice_id), wr_cache_en);
+ if (ret)
+ return ret;
+ }
+
if (config->activate_on_init) {
desc.slice_id = config->slice_id;
ret = llcc_slice_activate(&desc);
Newer SoCs with LLCC IP version 2.1.0.0 and later support write sub-cache cacheable feature. Use a separate llcc_slice_config member "write_scid_cacheable_en" to identify this feature and program LLCC_TRP_SCID_WRSC_CACHEABLE_EN register to enable it. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> --- drivers/soc/qcom/llcc-qcom.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)