@@ -2404,30 +2404,28 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
gpiod_set_value_cansleep(sensor->powerdown, 1);
ret = regulator_enable(sensor->dovdd);
- if (ret) {
- dev_err(sensor->dev,
- "failed to enable DOVDD regulator\n");
- goto disable;
- }
+ if (ret)
+ return dev_err_probe(sensor->dev, ret,
+ "failed to enable DOVDD\n");
ret = regulator_enable(sensor->avdd);
if (ret) {
dev_err(sensor->dev,
"failed to enable AVDD regulator\n");
- goto disable;
+ goto err_disable_dovdd;
}
ret = regulator_enable(sensor->dvdd);
if (ret) {
dev_err(sensor->dev,
"failed to enable DVDD regulator\n");
- goto disable;
+ goto err_disable_avdd;
}
ret = clk_prepare_enable(sensor->extclk);
if (ret) {
dev_err(sensor->dev, "failed to enable EXTCLK clock\n");
- goto disable;
+ goto err_disable_dvdd;
}
gpiod_set_value_cansleep(sensor->reset, 0);
@@ -2436,7 +2434,6 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
/* Time to enter streaming mode according to power timings. */
usleep_range(10000, 12000);
} else {
-disable:
gpiod_set_value_cansleep(sensor->powerdown, 1);
gpiod_set_value_cansleep(sensor->reset, 1);
@@ -2447,6 +2444,15 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
regulator_disable(sensor->dovdd);
}
+ return ret;
+
+err_disable_dvdd:
+ regulator_disable(sensor->dvdd);
+err_disable_avdd:
+ regulator_disable(sensor->avdd);
+err_disable_dovdd:
+ regulator_disable(sensor->dovdd);
+
return ret;
}
ov8865_sensor_power() disables all three of the sensor's regulators on the error path, however not all of the regulators may have been enabled at the time of the error, which will result in unbalanced disable calls. Fix the issue by adding specific error paths for each regulator. Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor") Signed-off-by: Daniel Scally <djrscally@gmail.com> --- drivers/media/i2c/ov8865.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-)