@@ -7,6 +7,14 @@ directory. These are intended to be small tests to exercise individual code
paths in the kernel. Tests are intended to be run after building, installing
and booting a kernel.
+Kselftest from mainline can be run on older stable kernels. Running tests
+from mainline offers the best coverage. Several test rings run mainline
+kselftest suite on stable releases. The reason is that when a new test
+gets added to test existing code to regression test a bug, we should be
+able to run that test on an older kernel. Hence, it is important to keep
+code that can still test an older kernel and make sure it skips the test
+gracefully on newer releases.
+
You can find additional information on Kselftest framework, how to
write new tests using the framework on Kselftest wiki:
@@ -194,5 +194,5 @@ prerequisite
# Run requested functions
clear_dumps $OUTFILE
-do_test >> $OUTFILE.txt
+do_test | tee -a $OUTFILE.txt
dmesg_dumps $OUTFILE
@@ -5,7 +5,7 @@ CFLAGS += -D_GNU_SOURCE
TEST_PROGS := binfmt_script non-regular
TEST_GEN_PROGS := execveat load_address_4096 load_address_2097152 load_address_16777216
-TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir pipe
+TEST_GEN_FILES := execveat.symlink execveat.denatured script subdir
# Makefile is a run-time dependency, since it's accessed by the execveat test
TEST_FILES := Makefile
@@ -11,7 +11,7 @@ all:
@for DIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$DIR; \
mkdir $$BUILD_TARGET -p; \
- make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
if [ -e $$DIR/$(TEST_PROGS) ]; then \
rsync -a $$DIR/$(TEST_PROGS) $$BUILD_TARGET/; \
fi \
@@ -32,6 +32,6 @@ override define CLEAN
@for DIR in $(SUBDIRS); do \
BUILD_TARGET=$(OUTPUT)/$$DIR; \
mkdir $$BUILD_TARGET -p; \
- make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
done
endef
@@ -877,7 +877,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext)
}
t->timed_out = true;
- kill(t->pid, SIGKILL);
+ // signal process group
+ kill(-(t->pid), SIGKILL);
}
void __wait_for_test(struct __test_metadata *t)
@@ -987,6 +988,7 @@ void __run_test(struct __fixture_metadata *f,
ksft_print_msg("ERROR SPAWNING TEST CHILD\n");
t->passed = 0;
} else if (t->pid == 0) {
+ setpgrp();
t->fn(t, variant);
if (t->skip)
_exit(255);
@@ -207,15 +207,21 @@ TEST(check_file_mmap)
errno = 0;
fd = open(".", O_TMPFILE | O_RDWR, 0600);
- ASSERT_NE(-1, fd) {
- TH_LOG("Can't create temporary file: %s",
- strerror(errno));
+ if (fd < 0) {
+ ASSERT_EQ(errno, EOPNOTSUPP) {
+ TH_LOG("Can't create temporary file: %s",
+ strerror(errno));
+ }
+ SKIP(goto out_free, "O_TMPFILE not supported by filesystem.");
}
errno = 0;
retval = fallocate(fd, 0, 0, FILE_SIZE);
- ASSERT_EQ(0, retval) {
- TH_LOG("Error allocating space for the temporary file: %s",
- strerror(errno));
+ if (retval) {
+ ASSERT_EQ(errno, EOPNOTSUPP) {
+ TH_LOG("Error allocating space for the temporary file: %s",
+ strerror(errno));
+ }
+ SKIP(goto out_close, "fallocate not supported by filesystem.");
}
/*
@@ -271,7 +277,9 @@ TEST(check_file_mmap)
}
munmap(addr, FILE_SIZE);
+out_close:
close(fd);
+out_free:
free(vec);
}
@@ -5,4 +5,4 @@ TEST_GEN_PROGS := openat2_test resolve_test rename_attack_test
include ../lib.mk
-$(TEST_GEN_PROGS): helpers.c
+$(TEST_GEN_PROGS): helpers.c helpers.h
@@ -9,6 +9,7 @@
#define _GNU_SOURCE
#include <stdint.h>
+#include <stdbool.h>
#include <errno.h>
#include <linux/types.h>
#include "../kselftest.h"
@@ -62,11 +63,12 @@ bool needs_openat2(const struct open_how *how);
(similar to chroot(2)). */
#endif /* RESOLVE_IN_ROOT */
-#define E_func(func, ...) \
- do { \
- if (func(__VA_ARGS__) < 0) \
- ksft_exit_fail_msg("%s:%d %s failed\n", \
- __FILE__, __LINE__, #func);\
+#define E_func(func, ...) \
+ do { \
+ errno = 0; \
+ if (func(__VA_ARGS__) < 0) \
+ ksft_exit_fail_msg("%s:%d %s failed - errno:%d\n", \
+ __FILE__, __LINE__, #func, errno); \
} while (0)
#define E_asprintf(...) E_func(asprintf, __VA_ARGS__)
@@ -259,6 +259,16 @@ void test_openat2_flags(void)
unlink(path);
fd = sys_openat2(AT_FDCWD, path, &test->how);
+ if (fd < 0 && fd == -EOPNOTSUPP) {
+ /*
+ * Skip the testcase if it failed because not supported
+ * by FS. (e.g. a valid O_TMPFILE combination on NFS)
+ */
+ ksft_test_result_skip("openat2 with %s fails with %d (%s)\n",
+ test->name, fd, strerror(-fd));
+ goto next;
+ }
+
if (test->err >= 0)
failed = (fd < 0);
else
@@ -303,7 +313,7 @@ void test_openat2_flags(void)
else
resultfn("openat2 with %s fails with %d (%s)\n",
test->name, test->err, strerror(-test->err));
-
+next:
free(fdpath);
fflush(stdout);
}
@@ -1 +1 @@
-timeout=90
+timeout=180
@@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts);
typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts);
typedef time_t (*vdso_time_t)(time_t *t);
-static int vdso_test_gettimeofday(void)
+#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__
+#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x
+#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x
+
+static void vdso_test_gettimeofday(void)
{
/* Find gettimeofday. */
vdso_gettimeofday_t vdso_gettimeofday =
(vdso_gettimeofday_t)vdso_sym(version, name[0]);
if (!vdso_gettimeofday) {
- printf("Could not find %s\n", name[0]);
- return KSFT_SKIP;
+ ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0]));
+ return;
}
struct timeval tv;
long ret = vdso_gettimeofday(&tv, 0);
if (ret == 0) {
- printf("The time is %lld.%06lld\n",
- (long long)tv.tv_sec, (long long)tv.tv_usec);
+ ksft_print_msg("The time is %lld.%06lld\n",
+ (long long)tv.tv_sec, (long long)tv.tv_usec);
+ ksft_test_result_pass(VDSO_TEST_PASS_MSG());
} else {
- printf("%s failed\n", name[0]);
- return KSFT_FAIL;
+ ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0]));
}
-
- return KSFT_PASS;
}
-static int vdso_test_clock_gettime(clockid_t clk_id)
+static void vdso_test_clock_gettime(clockid_t clk_id)
{
/* Find clock_gettime. */
vdso_clock_gettime_t vdso_clock_gettime =
(vdso_clock_gettime_t)vdso_sym(version, name[1]);
if (!vdso_clock_gettime) {
- printf("Could not find %s\n", name[1]);
- return KSFT_SKIP;
+ ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1]));
+ return;
}
struct timespec ts;
long ret = vdso_clock_gettime(clk_id, &ts);
if (ret == 0) {
- printf("The time is %lld.%06lld\n",
- (long long)ts.tv_sec, (long long)ts.tv_nsec);
+ ksft_print_msg("The time is %lld.%06lld\n",
+ (long long)ts.tv_sec, (long long)ts.tv_nsec);
+ ksft_test_result_pass(VDSO_TEST_PASS_MSG());
} else {
- printf("%s failed\n", name[1]);
- return KSFT_FAIL;
+ ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1]));
}
-
- return KSFT_PASS;
}
-static int vdso_test_time(void)
+static void vdso_test_time(void)
{
/* Find time. */
vdso_time_t vdso_time =
(vdso_time_t)vdso_sym(version, name[2]);
if (!vdso_time) {
- printf("Could not find %s\n", name[2]);
- return KSFT_SKIP;
+ ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2]));
+ return;
}
long ret = vdso_time(NULL);
if (ret > 0) {
- printf("The time in hours since January 1, 1970 is %lld\n",
+ ksft_print_msg("The time in hours since January 1, 1970 is %lld\n",
(long long)(ret / 3600));
+ ksft_test_result_pass(VDSO_TEST_PASS_MSG());
} else {
- printf("%s failed\n", name[2]);
- return KSFT_FAIL;
+ ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2]));
}
-
- return KSFT_PASS;
}
-static int vdso_test_clock_getres(clockid_t clk_id)
+static void vdso_test_clock_getres(clockid_t clk_id)
{
+ int clock_getres_fail = 0;
+
/* Find clock_getres. */
vdso_clock_getres_t vdso_clock_getres =
(vdso_clock_getres_t)vdso_sym(version, name[3]);
if (!vdso_clock_getres) {
- printf("Could not find %s\n", name[3]);
- return KSFT_SKIP;
+ ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3]));
+ return;
}
struct timespec ts, sys_ts;
long ret = vdso_clock_getres(clk_id, &ts);
if (ret == 0) {
- printf("The resolution is %lld %lld\n",
- (long long)ts.tv_sec, (long long)ts.tv_nsec);
+ ksft_print_msg("The vdso resolution is %lld %lld\n",
+ (long long)ts.tv_sec, (long long)ts.tv_nsec);
} else {
- printf("%s failed\n", name[3]);
- return KSFT_FAIL;
+ clock_getres_fail++;
}
ret = syscall(SYS_clock_getres, clk_id, &sys_ts);
- if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) {
- printf("%s failed\n", name[3]);
- return KSFT_FAIL;
- }
+ ksft_print_msg("The syscall resolution is %lld %lld\n",
+ (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec);
- return KSFT_PASS;
+ if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec))
+ clock_getres_fail++;
+
+ if (clock_getres_fail > 0) {
+ ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3]));
+ } else {
+ ksft_test_result_pass(VDSO_TEST_PASS_MSG());
+ }
}
const char *vdso_clock_name[12] = {
@@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = {
* This function calls vdso_test_clock_gettime and vdso_test_clock_getres
* with different values for clock_id.
*/
-static inline int vdso_test_clock(clockid_t clock_id)
+static inline void vdso_test_clock(clockid_t clock_id)
{
- int ret0, ret1;
-
- ret0 = vdso_test_clock_gettime(clock_id);
- /* A skipped test is considered passed */
- if (ret0 == KSFT_SKIP)
- ret0 = KSFT_PASS;
-
- ret1 = vdso_test_clock_getres(clock_id);
- /* A skipped test is considered passed */
- if (ret1 == KSFT_SKIP)
- ret1 = KSFT_PASS;
+ ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]);
- ret0 += ret1;
+ vdso_test_clock_gettime(clock_id);
- printf("clock_id: %s", vdso_clock_name[clock_id]);
-
- if (ret0 > 0)
- printf(" [FAIL]\n");
- else
- printf(" [PASS]\n");
-
- return ret0;
+ vdso_test_clock_getres(clock_id);
}
+#define VDSO_TEST_PLAN 16
+
int main(int argc, char **argv)
{
unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR);
- int ret;
+
+ ksft_print_header();
+ ksft_set_plan(VDSO_TEST_PLAN);
if (!sysinfo_ehdr) {
printf("AT_SYSINFO_EHDR is not present!\n");
@@ -201,44 +192,42 @@ int main(int argc, char **argv)
vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR));
- ret = vdso_test_gettimeofday();
+ vdso_test_gettimeofday();
#if _POSIX_TIMERS > 0
#ifdef CLOCK_REALTIME
- ret += vdso_test_clock(CLOCK_REALTIME);
+ vdso_test_clock(CLOCK_REALTIME);
#endif
#ifdef CLOCK_BOOTTIME
- ret += vdso_test_clock(CLOCK_BOOTTIME);
+ vdso_test_clock(CLOCK_BOOTTIME);
#endif
#ifdef CLOCK_TAI
- ret += vdso_test_clock(CLOCK_TAI);
+ vdso_test_clock(CLOCK_TAI);
#endif
#ifdef CLOCK_REALTIME_COARSE
- ret += vdso_test_clock(CLOCK_REALTIME_COARSE);
+ vdso_test_clock(CLOCK_REALTIME_COARSE);
#endif
#ifdef CLOCK_MONOTONIC
- ret += vdso_test_clock(CLOCK_MONOTONIC);
+ vdso_test_clock(CLOCK_MONOTONIC);
#endif
#ifdef CLOCK_MONOTONIC_RAW
- ret += vdso_test_clock(CLOCK_MONOTONIC_RAW);
+ vdso_test_clock(CLOCK_MONOTONIC_RAW);
#endif
#ifdef CLOCK_MONOTONIC_COARSE
- ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE);
+ vdso_test_clock(CLOCK_MONOTONIC_COARSE);
#endif
#endif
- ret += vdso_test_time();
-
- if (ret > 0)
- return KSFT_FAIL;
+ vdso_test_time();
- return KSFT_PASS;
+ ksft_print_cnts();
+ return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL;
}
@@ -2,9 +2,6 @@
# SPDX-License-Identifier: GPL-2.0
TCID="zram.sh"
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
. ./zram_lib.sh
run_zram () {
@@ -18,14 +15,4 @@ echo ""
check_prereqs
-# check zram module exists
-MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-if [ -f $MODULE_PATH ]; then
- run_zram
-elif [ -b /dev/zram0 ]; then
- run_zram
-else
- echo "$TCID : No zram.ko module or /dev/zram0 device file not found"
- echo "$TCID : CONFIG_ZRAM is not set"
- exit $ksft_skip
-fi
+run_zram
@@ -33,9 +33,7 @@ zram_algs="lzo"
zram_fill_fs()
{
- local mem_free0=$(free -m | awk 'NR==2 {print $4}')
-
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
echo "fill zram$i..."
local b=0
while [ true ]; do
@@ -45,29 +43,17 @@ zram_fill_fs()
b=$(($b + 1))
done
echo "zram$i can be filled with '$b' KB"
- done
- local mem_free1=$(free -m | awk 'NR==2 {print $4}')
- local used_mem=$(($mem_free0 - $mem_free1))
+ local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"`
+ local v=$((100 * 1024 * $b / $mem_used_total))
+ if [ "$v" -lt 100 ]; then
+ echo "FAIL compression ratio: 0.$v:1"
+ ERR_CODE=-1
+ return
+ fi
- local total_size=0
- for sm in $zram_sizes; do
- local s=$(echo $sm | sed 's/M//')
- total_size=$(($total_size + $s))
+ echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
done
-
- echo "zram used ${used_mem}M, zram disk sizes ${total_size}M"
-
- local v=$((100 * $total_size / $used_mem))
-
- if [ "$v" -lt 100 ]; then
- echo "FAIL compression ratio: 0.$v:1"
- ERR_CODE=-1
- zram_cleanup
- return
- fi
-
- echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
}
check_prereqs
@@ -81,7 +67,6 @@ zram_mount
zram_fill_fs
zram_cleanup
-zram_unload
if [ $ERR_CODE -ne 0 ]; then
echo "$TCID : [FAIL]"
@@ -36,7 +36,6 @@ zram_set_memlimit
zram_makeswap
zram_swapoff
zram_cleanup
-zram_unload
if [ $ERR_CODE -ne 0 ]; then
echo "$TCID : [FAIL]"
@@ -5,12 +5,17 @@
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
# Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
-MODULE=0
dev_makeswap=-1
dev_mounted=-1
-
+dev_start=0
+dev_end=-1
+module_load=-1
+sys_control=-1
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
+kernel_version=`uname -r | cut -d'.' -f1,2`
+kernel_major=${kernel_version%.*}
+kernel_minor=${kernel_version#*.}
trap INT
@@ -25,68 +30,104 @@ check_prereqs()
fi
}
+kernel_gte()
+{
+ major=${1%.*}
+ minor=${1#*.}
+
+ if [ $kernel_major -gt $major ]; then
+ return 0
+ elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then
+ return 0
+ fi
+
+ return 1
+}
+
zram_cleanup()
{
echo "zram cleanup"
local i=
- for i in $(seq 0 $dev_makeswap); do
+ for i in $(seq $dev_start $dev_makeswap); do
swapoff /dev/zram$i
done
- for i in $(seq 0 $dev_mounted); do
+ for i in $(seq $dev_start $dev_mounted); do
umount /dev/zram$i
done
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
echo 1 > /sys/block/zram${i}/reset
rm -rf zram$i
done
-}
+ if [ $sys_control -eq 1 ]; then
+ for i in $(seq $dev_start $dev_end); do
+ echo $i > /sys/class/zram-control/hot_remove
+ done
+ fi
-zram_unload()
-{
- if [ $MODULE -ne 0 ] ; then
- echo "zram rmmod zram"
+ if [ $module_load -eq 1 ]; then
rmmod zram > /dev/null 2>&1
fi
}
zram_load()
{
- # check zram module exists
- MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
- if [ -f $MODULE_PATH ]; then
- MODULE=1
- echo "create '$dev_num' zram device(s)"
- modprobe zram num_devices=$dev_num
- if [ $? -ne 0 ]; then
- echo "failed to insert zram module"
- exit 1
- fi
-
- dev_num_created=$(ls /dev/zram* | wc -w)
+ echo "create '$dev_num' zram device(s)"
+
+ # zram module loaded, new kernel
+ if [ -d "/sys/class/zram-control" ]; then
+ echo "zram modules already loaded, kernel supports" \
+ "zram-control interface"
+ dev_start=$(ls /dev/zram* | wc -w)
+ dev_end=$(($dev_start + $dev_num - 1))
+ sys_control=1
+
+ for i in $(seq $dev_start $dev_end); do
+ cat /sys/class/zram-control/hot_add > /dev/null
+ done
+
+ echo "all zram devices (/dev/zram$dev_start~$dev_end" \
+ "successfully created"
+ return 0
+ fi
- if [ "$dev_num_created" -ne "$dev_num" ]; then
- echo "unexpected num of devices: $dev_num_created"
- ERR_CODE=-1
+ # detect old kernel or built-in
+ modprobe zram num_devices=$dev_num
+ if [ ! -d "/sys/class/zram-control" ]; then
+ if grep -q '^zram' /proc/modules; then
+ rmmod zram > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "zram module is being used on old kernel" \
+ "without zram-control interface"
+ exit $ksft_skip
+ fi
else
- echo "zram load module successful"
+ echo "test needs CONFIG_ZRAM=m on old kernel without" \
+ "zram-control interface"
+ exit $ksft_skip
fi
- elif [ -b /dev/zram0 ]; then
- echo "/dev/zram0 device file found: OK"
- else
- echo "ERROR: No zram.ko module or no /dev/zram0 device found"
- echo "$TCID : CONFIG_ZRAM is not set"
- exit 1
+ modprobe zram num_devices=$dev_num
fi
+
+ module_load=1
+ dev_end=$(($dev_num - 1))
+ echo "all zram devices (/dev/zram0~$dev_end) successfully created"
}
zram_max_streams()
{
echo "set max_comp_streams to zram device(s)"
- local i=0
+ kernel_gte 4.7
+ if [ $? -eq 0 ]; then
+ echo "The device attribute max_comp_streams was"\
+ "deprecated in 4.7"
+ return 0
+ fi
+
+ local i=$dev_start
for max_s in $zram_max_streams; do
local sys_path="/sys/block/zram${i}/max_comp_streams"
echo $max_s > $sys_path || \
@@ -98,7 +139,7 @@ zram_max_streams()
echo "FAIL can't set max_streams '$max_s', get $max_stream"
i=$(($i + 1))
- echo "$sys_path = '$max_streams' ($i/$dev_num)"
+ echo "$sys_path = '$max_streams'"
done
echo "zram max streams: OK"
@@ -108,15 +149,16 @@ zram_compress_alg()
{
echo "test that we can set compression algorithm"
- local algs=$(cat /sys/block/zram0/comp_algorithm)
+ local i=$dev_start
+ local algs=$(cat /sys/block/zram${i}/comp_algorithm)
echo "supported algs: $algs"
- local i=0
+
for alg in $zram_algs; do
local sys_path="/sys/block/zram${i}/comp_algorithm"
echo "$alg" > $sys_path || \
echo "FAIL can't set '$alg' to $sys_path"
i=$(($i + 1))
- echo "$sys_path = '$alg' ($i/$dev_num)"
+ echo "$sys_path = '$alg'"
done
echo "zram set compression algorithm: OK"
@@ -125,14 +167,14 @@ zram_compress_alg()
zram_set_disksizes()
{
echo "set disk size to zram device(s)"
- local i=0
+ local i=$dev_start
for ds in $zram_sizes; do
local sys_path="/sys/block/zram${i}/disksize"
echo "$ds" > $sys_path || \
echo "FAIL can't set '$ds' to $sys_path"
i=$(($i + 1))
- echo "$sys_path = '$ds' ($i/$dev_num)"
+ echo "$sys_path = '$ds'"
done
echo "zram set disksizes: OK"
@@ -142,14 +184,14 @@ zram_set_memlimit()
{
echo "set memory limit to zram device(s)"
- local i=0
+ local i=$dev_start
for ds in $zram_mem_limits; do
local sys_path="/sys/block/zram${i}/mem_limit"
echo "$ds" > $sys_path || \
echo "FAIL can't set '$ds' to $sys_path"
i=$(($i + 1))
- echo "$sys_path = '$ds' ($i/$dev_num)"
+ echo "$sys_path = '$ds'"
done
echo "zram set memory limit: OK"
@@ -158,8 +200,8 @@ zram_set_memlimit()
zram_makeswap()
{
echo "make swap with zram device(s)"
- local i=0
- for i in $(seq 0 $(($dev_num - 1))); do
+ local i=$dev_start
+ for i in $(seq $dev_start $dev_end); do
mkswap /dev/zram$i > err.log 2>&1
if [ $? -ne 0 ]; then
cat err.log
@@ -182,7 +224,7 @@ zram_makeswap()
zram_swapoff()
{
local i=
- for i in $(seq 0 $dev_makeswap); do
+ for i in $(seq $dev_start $dev_end); do
swapoff /dev/zram$i > err.log 2>&1
if [ $? -ne 0 ]; then
cat err.log
@@ -196,7 +238,7 @@ zram_swapoff()
zram_makefs()
{
- local i=0
+ local i=$dev_start
for fs in $zram_filesystems; do
# if requested fs not supported default it to ext2
which mkfs.$fs > /dev/null 2>&1 || fs=ext2
@@ -215,7 +257,7 @@ zram_makefs()
zram_mount()
{
local i=0
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
echo "mount /dev/zram$i"
mkdir zram$i
mount /dev/zram$i zram$i > /dev/null || \
Hi Linus, Please pull the following Kselftest fixes update for Linux 5.17-rc3 This Kselftest fixes update for Linux 5.17-rc3 consists of important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07: Linux 5.17-rc1 (2022-01-23 10:12:53 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-5.17-rc3 for you to fetch changes up to ec049891b2dc16591813eacaddc476b3d27c8c14: kselftest: Fix vdso_test_abi return status (2022-01-31 10:35:14 -0700) ---------------------------------------------------------------- linux-kselftest-fixes-5.17-rc3 This Kselftest fixes update for Linux 5.17-rc3 consists of important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems ---------------------------------------------------------------- Cristian Marussi (4): selftests: openat2: Print also errno in failure messages selftests: openat2: Add missing dependency in Makefile selftests: openat2: Skip testcases that fail with EOPNOTSUPP selftests: skip mincore.check_file_mmap when fs lacks needed support Li Zhijian (1): kselftest: signal all child processes Muhammad Usama Anjum (2): selftests/exec: Remove pipe from TEST_GEN_FILES selftests: futex: Use variable MAKE instead of make Nícolas F. R. A. Prado (2): selftests: rtc: Increase test timeout so that all tests run selftests: cpufreq: Write test output to stdout as well Shuah Khan (1): docs/kselftest: clarify running mainline tests on stables Vincenzo Frascino (1): kselftest: Fix vdso_test_abi return status Yang Xu (3): selftests/zram: Skip max_comp_streams interface on newer kernel selftests/zram01.sh: Fix compression ratio calculation selftests/zram: Adapt the situation that /dev/zram0 is being used Documentation/dev-tools/kselftest.rst | 8 ++ tools/testing/selftests/cpufreq/main.sh | 2 +- tools/testing/selftests/exec/Makefile | 2 +- tools/testing/selftests/futex/Makefile | 4 +- tools/testing/selftests/kselftest_harness.h | 4 +- tools/testing/selftests/mincore/mincore_selftest.c | 20 ++- tools/testing/selftests/openat2/Makefile | 2 +- tools/testing/selftests/openat2/helpers.h | 12 +- tools/testing/selftests/openat2/openat2_test.c | 12 +- tools/testing/selftests/rtc/settings | 2 +- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 ++++++++++----------- tools/testing/selftests/zram/zram.sh | 15 +-- tools/testing/selftests/zram/zram01.sh | 33 ++--- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 134 +++++++++++++------- 15 files changed, 209 insertions(+), 177 deletions(-) ----------------------------------------------------------------