| Message ID | 1644574845-23248-1-git-send-email-quic_rohiagar@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: qcom: Add chosen node information for SDX65. | expand |
On 2/25/2022 1:14 AM, Bjorn Andersson wrote: > On Fri 11 Feb 04:20 CST 2022, Rohit Agarwal wrote: > >> Add chosen node in the base dtsi file of SDX65. >> > While this happens to be the same on most boards, it is still a > board-specific decision which UART is the debug uart, or if there is one > at all... > > So this property should remain in the dts. > > Thanks, > Bjorn Without the chosen node in base dtsi, the device is not booting up. Can we have an empty chosen node in the base dtsi and the board-specific details updated in the respective dts file. The device boots up with this. Thanks, Rohit >> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> >> --- >> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 4 ---- >> arch/arm/boot/dts/qcom-sdx65.dtsi | 4 ++++ >> 2 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts >> index 59457da..3a75c21 100644 >> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts >> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts >> @@ -14,10 +14,6 @@ >> aliases { >> serial0 = &blsp1_uart3; >> }; >> - >> - chosen { >> - stdout-path = "serial0:115200n8"; >> - }; >> }; >> >> &blsp1_uart3 { >> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi >> index 796641d..653df15 100644 >> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi >> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi >> @@ -17,6 +17,10 @@ >> qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>; >> interrupt-parent = <&intc>; >> >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> memory { >> device_type = "memory"; >> reg = <0 0>; >> -- >> 2.7.4 >>
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 59457da..3a75c21 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -14,10 +14,6 @@ aliases { serial0 = &blsp1_uart3; }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &blsp1_uart3 { diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 796641d..653df15 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -17,6 +17,10 @@ qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>; interrupt-parent = <&intc>; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { device_type = "memory"; reg = <0 0>;
Add chosen node in the base dtsi file of SDX65. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm/boot/dts/qcom-sdx65-mtp.dts | 4 ---- arch/arm/boot/dts/qcom-sdx65.dtsi | 4 ++++ 2 files changed, 4 insertions(+), 4 deletions(-)