@@ -303,7 +303,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
/*
- * If the bit is set to 0, chipcommon controlls this GPIO,
+ * If the bit is set to 0, chipcommon controls this GPIO,
* if the bit is set to 1, it is used by some part of the chip and not our code.
*/
u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
@@ -206,7 +206,7 @@ static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
usleep_range(2000, 2500);
}
-/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
+/* Disable to allow reading SPROM. Don't know the advantages of enabling it. */
void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
{
struct bcma_bus *bus = cc->core->bus;
@@ -234,7 +234,7 @@ static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
switch (bus->chipinfo.id) {
case BCMA_CHIP_ID_BCM4313:
/*
- * enable 12 mA drive strenth for 4313 and set chipControl
+ * enable 12 mA drive strength for 4313 and set chipControl
* register bit 1
*/
bcma_chipco_chipctl_maskset(cc, 0,
@@ -249,7 +249,7 @@ static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
case BCMA_CHIP_ID_BCM43224:
case BCMA_CHIP_ID_BCM43421:
/*
- * enable 12 mA drive strenth for 43224 and set chipControl
+ * enable 12 mA drive strength for 43224 and set chipControl
* register bit 15
*/
if (bus->chipinfo.rev == 0) {
@@ -61,7 +61,7 @@ static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev,
{
u32 addr = 0;
- /* Issue config commands only when the data link is up (atleast
+ /* Issue config commands only when the data link is up (at least
* one external pcie device is present).
*/
if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG)
@@ -295,7 +295,7 @@ static u8 bcma_find_pci_capability(struct bcma_drv_pci *pc, unsigned int dev,
if (cap_ptr == 0x00)
return cap_ptr;
- /* loop thr'u the capability list and see if the requested capabilty
+ /* loop through the capability list and see if the requested capability
* exists */
bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8));
while (cap_id != req_cap_id) {
@@ -317,7 +317,7 @@ static u8 bcma_find_pci_capability(struct bcma_drv_pci *pc, unsigned int dev,
*buflen = 0;
- /* copy the cpability data excluding cap ID and next ptr */
+ /* copy the capability data excluding cap ID and next ptr */
cap_data = cap_ptr + 2;
if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE)
bufsize = PCI_CONFIG_SPACE_SIZE - cap_data;
@@ -293,7 +293,7 @@ static int bcma_register_devices(struct bcma_bus *bus)
int err;
list_for_each_entry(core, &bus->cores, list) {
- /* We support that cores ourself */
+ /* We support that cores our self */
switch (core->id.id) {
case BCMA_CORE_4706_CHIPCOMMON:
case BCMA_CORE_CHIPCOMMON:
@@ -369,7 +369,7 @@ void bcma_unregister_cores(struct bcma_bus *bus)
if (bus->hosttype == BCMA_HOSTTYPE_SOC)
platform_device_unregister(bus->drv_cc.watchdog);
- /* Now noone uses internally-handled cores, we can free them */
+ /* Now no one uses internally-handled cores, we can free them */
list_for_each_entry_safe(core, tmp, &bus->cores, list) {
list_del(&core->list);
put_device(&core->dev);
@@ -28,7 +28,7 @@ static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out);
* callback handler which fills the SPROM data structure. The fallback is
* used for PCI based BCMA devices, where no valid SPROM can be found
* in the shadow registers and to provide the SPROM for SoCs where BCMA is
- * to controll the system bus.
+ * to control the system bus.
*
* This function is useful for weird architectures that have a half-assed
* BCMA device hardwired to their PCI bus.
@@ -281,7 +281,7 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
- /* Extract cores power info info */
+ /* Extract cores power info */
for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
o = pwr_info_offset[i];
SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,