@@ -42,6 +42,16 @@
#define OV7251_TIMING_FORMAT2_MIRROR BIT(2)
#define OV7251_PRE_ISP_00 0x5e00
#define OV7251_PRE_ISP_00_TEST_PATTERN BIT(7)
+#define OV7251_PLL1_PRE_DIV_REG 0x30b4
+#define OV7251_PLL1_MULT_REG 0x30b3
+#define OV7251_PLL1_DIVIDER_REG 0x30b1
+#define OV7251_PLL1_PIX_DIV_REG 0x30b0
+#define OV7251_PLL1_MIPI_DIV_REG 0x30b5
+#define OV7251_PLL2_PRE_DIV_REG 0x3098
+#define OV7251_PLL2_MULT_REG 0x3099
+#define OV7251_PLL2_DIVIDER_REG 0x309d
+#define OV7251_PLL2_SYS_DIV_REG 0x309a
+#define OV7251_PLL2_ADC_DIV_REG 0x309b
struct reg_value {
u16 reg;
@@ -60,6 +70,27 @@ struct ov7251_mode_info {
struct v4l2_fract timeperframe;
};
+struct ov7251_pll1_config {
+ unsigned int pre_div;
+ unsigned int mult;
+ unsigned int div;
+ unsigned int pix_div;
+ unsigned int mipi_div;
+};
+
+struct ov7251_pll2_config {
+ unsigned int pre_div;
+ unsigned int mult;
+ unsigned int div;
+ unsigned int sys_div;
+ unsigned int adc_div;
+};
+
+struct ov7251_pll_configs {
+ const struct ov7251_pll1_config *pll1;
+ const struct ov7251_pll2_config *pll2;
+};
+
struct ov7251 {
struct i2c_client *i2c_client;
struct device *dev;
@@ -71,6 +102,8 @@ struct ov7251 {
struct clk *xclk;
u32 xclk_freq;
+ const struct ov7251_pll_configs *pll_configs;
+
struct regulator *io_regulator;
struct regulator *core_regulator;
struct regulator *analog_regulator;
@@ -100,6 +133,36 @@ static inline struct ov7251 *to_ov7251(struct v4l2_subdev *sd)
return container_of(sd, struct ov7251, sd);
}
+enum xclk_rate {
+ OV7251_24_MHZ,
+ OV7251_NUM_SUPPORTED_RATES
+};
+
+static const struct ov7251_pll1_config ov7251_pll1_config_24_mhz = {
+ .pre_div = 0x03,
+ .mult = 0x64,
+ .div = 0x01,
+ .pix_div = 0x0a,
+ .mipi_div = 0x05
+};
+
+static const struct ov7251_pll2_config ov7251_pll2_config_24_mhz = {
+ .pre_div = 0x04,
+ .mult = 0x28,
+ .div = 0x00,
+ .sys_div = 0x05,
+ .adc_div = 0x04
+};
+
+static const struct ov7251_pll_configs ov7251_pll_configs_24_mhz = {
+ .pll1 = &ov7251_pll1_config_24_mhz,
+ .pll2 = &ov7251_pll2_config_24_mhz
+};
+
+static const struct ov7251_pll_configs *ov7251_pll_configs[] = {
+ [OV7251_24_MHZ] = &ov7251_pll_configs_24_mhz
+};
+
static const struct reg_value ov7251_global_init_setting[] = {
{ 0x0103, 0x01 },
{ 0x303b, 0x02 },
@@ -118,16 +181,6 @@ static const struct reg_value ov7251_setting_vga_30fps[] = {
{ 0x301c, 0xf0 },
{ 0x3023, 0x05 },
{ 0x3037, 0xf0 },
- { 0x3098, 0x04 }, /* pll2 pre divider */
- { 0x3099, 0x28 }, /* pll2 multiplier */
- { 0x309a, 0x05 }, /* pll2 sys divider */
- { 0x309b, 0x04 }, /* pll2 adc divider */
- { 0x309d, 0x00 }, /* pll2 divider */
- { 0x30b0, 0x0a }, /* pll1 pix divider */
- { 0x30b1, 0x01 }, /* pll1 divider */
- { 0x30b3, 0x64 }, /* pll1 multiplier */
- { 0x30b4, 0x03 }, /* pll1 pre divider */
- { 0x30b5, 0x05 }, /* pll1 mipi divider */
{ 0x3106, 0xda },
{ 0x3503, 0x07 },
{ 0x3509, 0x10 },
@@ -256,16 +309,6 @@ static const struct reg_value ov7251_setting_vga_60fps[] = {
{ 0x301c, 0x00 },
{ 0x3023, 0x05 },
{ 0x3037, 0xf0 },
- { 0x3098, 0x04 }, /* pll2 pre divider */
- { 0x3099, 0x28 }, /* pll2 multiplier */
- { 0x309a, 0x05 }, /* pll2 sys divider */
- { 0x309b, 0x04 }, /* pll2 adc divider */
- { 0x309d, 0x00 }, /* pll2 divider */
- { 0x30b0, 0x0a }, /* pll1 pix divider */
- { 0x30b1, 0x01 }, /* pll1 divider */
- { 0x30b3, 0x64 }, /* pll1 multiplier */
- { 0x30b4, 0x03 }, /* pll1 pre divider */
- { 0x30b5, 0x05 }, /* pll1 mipi divider */
{ 0x3106, 0xda },
{ 0x3503, 0x07 },
{ 0x3509, 0x10 },
@@ -394,16 +437,6 @@ static const struct reg_value ov7251_setting_vga_90fps[] = {
{ 0x301c, 0x00 },
{ 0x3023, 0x05 },
{ 0x3037, 0xf0 },
- { 0x3098, 0x04 }, /* pll2 pre divider */
- { 0x3099, 0x28 }, /* pll2 multiplier */
- { 0x309a, 0x05 }, /* pll2 sys divider */
- { 0x309b, 0x04 }, /* pll2 adc divider */
- { 0x309d, 0x00 }, /* pll2 divider */
- { 0x30b0, 0x0a }, /* pll1 pix divider */
- { 0x30b1, 0x01 }, /* pll1 divider */
- { 0x30b3, 0x64 }, /* pll1 multiplier */
- { 0x30b4, 0x03 }, /* pll1 pre divider */
- { 0x30b5, 0x05 }, /* pll1 mipi divider */
{ 0x3106, 0xda },
{ 0x3503, 0x07 },
{ 0x3509, 0x10 },
@@ -519,6 +552,10 @@ static const struct reg_value ov7251_setting_vga_90fps[] = {
{ 0x5001, 0x80 },
};
+static const unsigned long supported_xclk_rates[] = {
+ [OV7251_24_MHZ] = 24000000,
+};
+
static const s64 link_freq[] = {
240000000,
};
@@ -692,6 +729,63 @@ static int ov7251_read_reg(struct ov7251 *ov7251, u16 reg, u8 *val)
return 0;
}
+static int ov7251_pll_configure(struct ov7251 *ov7251)
+{
+ const struct ov7251_pll_configs *configs;
+ int ret;
+
+ configs = ov7251->pll_configs;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL1_PRE_DIV_REG,
+ configs->pll1->pre_div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL1_MULT_REG,
+ configs->pll1->mult);
+ if (ret < 0)
+ return ret;
+ ret = ov7251_write_reg(ov7251, OV7251_PLL1_DIVIDER_REG,
+ configs->pll1->div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL1_PIX_DIV_REG,
+ configs->pll1->pix_div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL1_MIPI_DIV_REG,
+ configs->pll1->mipi_div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL2_PRE_DIV_REG,
+ configs->pll2->pre_div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL2_MULT_REG,
+ configs->pll2->mult);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL2_DIVIDER_REG,
+ configs->pll2->div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL2_SYS_DIV_REG,
+ configs->pll2->sys_div);
+ if (ret < 0)
+ return ret;
+
+ ret = ov7251_write_reg(ov7251, OV7251_PLL2_ADC_DIV_REG,
+ configs->pll2->adc_div);
+
+ return ret;
+}
+
static int ov7251_set_exposure(struct ov7251 *ov7251, s32 exposure)
{
u16 reg;
@@ -1143,6 +1237,11 @@ static int ov7251_s_stream(struct v4l2_subdev *subdev, int enable)
mutex_lock(&ov7251->lock);
if (enable) {
+ ret = ov7251_pll_configure(ov7251);
+ if (ret)
+ return dev_err_probe(ov7251->dev, ret,
+ "error configuring PLLs\n");
+
ret = ov7251_set_register_array(ov7251,
ov7251->current_mode->data,
ov7251->current_mode->data_size);
@@ -1325,6 +1424,7 @@ static int ov7251_probe(struct i2c_client *client)
struct ov7251 *ov7251;
u8 chip_id_high, chip_id_low, chip_rev;
int ret;
+ int i;
ov7251 = devm_kzalloc(dev, sizeof(struct ov7251), GFP_KERNEL);
if (!ov7251)
@@ -1363,6 +1463,11 @@ static int ov7251_probe(struct i2c_client *client)
dev_err(dev, "could not set xclk frequency\n");
return ret;
}
+ for (i = 0; i < ARRAY_SIZE(supported_xclk_rates); i++)
+ if (ov7251->xclk_freq == supported_xclk_rates[i])
+ break;
+
+ ov7251->pll_configs = ov7251_pll_configs[i];
ov7251->io_regulator = devm_regulator_get(dev, "vdddo");
if (IS_ERR(ov7251->io_regulator)) {
Rather than having the pll settings hidden inside mode blobs, define them in structs and use a dedicated function to set them. This makes it simpler to extend the driver to support other external clock frequencies. Signed-off-by: Daniel Scally <djrscally@gmail.com> --- drivers/media/i2c/ov7251.c | 165 ++++++++++++++++++++++++++++++------- 1 file changed, 135 insertions(+), 30 deletions(-)