@@ -19,11 +19,11 @@
#include <linux/amba/pl022.h>
#include <linux/amba/serial.h>
#include <linux/spi/spi.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
#include <linux/mfd/tc3589x.h>
#include <linux/mfd/tps6105x.h>
-#include <linux/mfd/ab8500/gpio.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
#include <linux/smsc911x.h>
@@ -10,7 +10,7 @@
#include <linux/amba/bus.h>
#include <linux/irq.h>
#include <linux/i2c.h>
-#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500/ab5500.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -9,7 +9,7 @@
#define __MACH_IRQS_BOARD_MOP500_H
/* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
@@ -12,7 +12,7 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/interrupt.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/slab.h>
/**
@@ -22,8 +22,8 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/random.h>
-#include <linux/mfd/ab5500/ab5500.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab5500.h>
#include <linux/list.h>
#include <linux/bitops.h>
#include <linux/spinlock.h>
@@ -7,8 +7,8 @@
#include <linux/export.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#include <linux/mfd/ab5500/ab5500.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab5500.h>
#include <linux/uaccess.h>
#include "ab5500-core.h"
@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
/*
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
static u32 debug_bank;
static u32 debug_address;
@@ -18,9 +18,9 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/list.h>
-#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/gpadc.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
/*
* GPADC register offsets
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/db8500-prcmu.h>
static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
@@ -7,9 +7,9 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/sysctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-sysctrl.h>
static struct device *sysctrl_dev;
@@ -8,8 +8,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/pwm.h>
-#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/module.h>
/*
@@ -16,8 +16,8 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
@@ -15,7 +15,7 @@
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
@@ -30,7 +30,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#define AB8500_MAIN_WD_CTRL_REG 0x01
#define AB8500_USB_LINE_STAT_REG 0x80