diff mbox

[08/14] mmc: mmci: Fixup error handling for dma

Message ID 1323106560-5218-9-git-send-email-ulf.hansson@stericsson.com
State Accepted
Commit 3b6e3c73851a9a4b0e6ed9d378206341dd65e8a5
Headers show

Commit Message

Ulf Hansson Dec. 5, 2011, 5:35 p.m. UTC 
When getting a cmd irq during an ongoing data transfer
with dma, the dma job were never terminated. This is now
corrected.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
---
 drivers/mmc/host/mmci.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e900f51..62ad649 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -761,8 +761,12 @@  mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 	}
 
 	if (!cmd->data || cmd->error) {
-		if (host->data)
+		if (host->data) {
+			/* Terminate the DMA transfer */
+			if (dma_inprogress(host))
+				mmci_dma_data_error(host);
 			mmci_stop_data(host);
+		}
 		mmci_request_end(host, cmd->mrq);
 	} else if (!(cmd->data->flags & MMC_DATA_READ)) {
 		mmci_start_data(host, cmd->data);