@@ -73,7 +73,8 @@
};
&gpmc {
- ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */
+ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
+ 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
ethernet@gpmc {
pinctrl-names = "default";
@@ -35,11 +35,14 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- linux,mtd-name = "micron,mt29f4g16abbda3w";
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
@@ -384,7 +384,9 @@
/* Chip select 0 */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* NAND I/O window, 4 bytes */
+ interrupt-parent = <&intc>;
interrupts = <20>;
ti,nand-ecc-opt = "ham1";
nand-bus-width = <16>;
@@ -261,10 +261,13 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
ti,nand-ecc-opt = "sw";
@@ -204,7 +204,10 @@
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "sw";
@@ -154,12 +154,15 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0: 16MB for NAND */
<5 0 0x2c000000 0x01000000>;
nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "hynix,h8kds0un0mer-4em";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
@@ -492,7 +492,10 @@
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
@@ -95,8 +95,11 @@
&gpmc {
nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
@@ -210,8 +210,8 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
- <5 0 0x2c000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x01000000>, /* CS0: 16MB for NAND */
+ <5 0 0x2c000000 0x01000000>; /* CS5: 16MB for ethernet */
ethernet@gpmc {
pinctrl-names = "default";
@@ -58,3 +58,7 @@
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
+};
@@ -97,12 +97,15 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x01000000>,
- <1 0 0x08000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
+ <1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
nand@0,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "micron,nand";
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
@@ -362,7 +362,10 @@
<7 0 0x15000000 0x01000000>;
nand@0,0 {
- reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
@@ -546,7 +546,10 @@
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "sw";
@@ -275,10 +275,13 @@
};
&gpmc {
- ranges = <0 0 0x00000000 0x01000000>;
+ ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
+ compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
nand-bus-width = <16>;
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
ti,nand-ecc-opt = "sw";
@@ -721,6 +721,10 @@
gpmc,num-waitpins = <4>;
#address-cells = <2>;
#size-cells = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
usb_otg_hs: usb_otg_hs@480ab000 {
@@ -103,10 +103,13 @@
};
nand@1,0 {
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
- reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC driver now implements gpiochip and irqchip so enable gpio-controller and interrupt-controller properties. With this the interrupt parent of NAND node changes so fix it accordingly. Signed-off-by: Roger Quadros <rogerq@ti.com> --- v4: Applied Tony's patch to fix broken ethernet on torpedo. updated v4 series available at git@github.com:rogerq/linux.git * [branch] for-v4.4/gpmc-v4 arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 3 ++- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 7 +++++-- arch/arm/boot/dts/omap3-beagle.dts | 2 ++ arch/arm/boot/dts/omap3-cm-t3x.dtsi | 5 ++++- arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 3 +++ arch/arm/boot/dts/omap3-evm-37xx.dts | 7 +++++-- arch/arm/boot/dts/omap3-gta04.dtsi | 3 +++ arch/arm/boot/dts/omap3-igep.dtsi | 5 ++++- arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 ++-- arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 ++++ arch/arm/boot/dts/omap3-ldp.dts | 9 ++++++--- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 5 ++++- arch/arm/boot/dts/omap3-pandora-common.dtsi | 3 +++ arch/arm/boot/dts/omap3-tao3530.dtsi | 5 ++++- arch/arm/boot/dts/omap3.dtsi | 4 ++++ arch/arm/boot/dts/omap3430-sdp.dts | 5 ++++- 16 files changed, 59 insertions(+), 15 deletions(-)