new file mode 100644
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+ - $ref: "i2c-controller.yaml"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - atmel,sama5d4-i2c
+ - atmel,sama5d2-i2c
+ - microchip,sam9x60-i2c
+ then:
+ properties:
+ i2c-sda-hold-time-ns:
+ description:
+ TWD hold time
+ maxItems: 1
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91rm9200-i2c
+ - atmel,at91sam9261-i2c
+ - atmel,at91sam9260-i2c
+ - atmel,at91sam9g20-i2c
+ - atmel,at91sam9g10-i2c
+ - atmel,at91sam9x5-i2c
+ - atmel,sama5d4-i2c
+ - atmel,sama5d2-i2c
+ - microchip,sam9x60-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ default: 100000
+
+ dmas:
+ items:
+ - description: TX DMA Channel Specifier
+ - description: RX DMA Channel Specifier
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ atmel,fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Maximum number of data the RX and TX FIFOs can store for
+ FIFO capable I2C controllers.
+
+ scl-gpios: true
+
+ sda-gpios: true
+
+ pinctrl:
+ description: |
+ Add extra pinctrl to configure i2c pins to gpio function for i2c
+ bus recovery, call it "gpio" state
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0: i2c@fff84000 {
+ compatible = "atmel,at91sam9g20-i2c";
+ reg = <0xfff84000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+ };
+
+ i2c1: i2c@f8034600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0xf8034600 0x100>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(11)>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+ AT91_XDMAC_DT_PERID(12)>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx0>;
+ atmel,fifo-size = <16>;
+ i2c-sda-hold-time-ns = <336>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ eeprom@1a {
+ compatible = "wm8731";
+ reg = <0x1a>;
+ };
+ };
deleted file mode 100644
@@ -1,82 +0,0 @@
-I2C for Atmel platforms
-
-Required properties :
-- compatible : Must be one of:
- "atmel,at91rm9200-i2c",
- "atmel,at91sam9261-i2c",
- "atmel,at91sam9260-i2c",
- "atmel,at91sam9g20-i2c",
- "atmel,at91sam9g10-i2c",
- "atmel,at91sam9x5-i2c",
- "atmel,sama5d4-i2c",
- "atmel,sama5d2-i2c",
- "microchip,sam9x60-i2c".
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
- capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for:
- "atmel,sama5d4-i2c",
- "atmel,sama5d2-i2c",
- "microchip,sam9x60-i2c".
-- scl-gpios: specify the gpio related to SCL pin
-- sda-gpios: specify the gpio related to SDA pin
-- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
- bus recovery, call it "gpio" state
-- Child nodes conforming to i2c bus binding
-
-
-Examples :
-
-i2c0: i2c@fff84000 {
- compatible = "atmel,at91sam9g20-i2c";
- reg = <0xfff84000 0x100>;
- interrupts = <12 4 6>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&twi0_clk>;
- clock-frequency = <400000>;
-
- 24c512@50 {
- compatible = "atmel,24c512";
- reg = <0x50>;
- pagesize = <128>;
- }
-}
-
-i2c0: i2c@f8034600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0xf8034600 0x100>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(11)>,
- <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(12)>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx0>;
- atmel,fifo-size = <16>;
- i2c-sda-hold-time-ns = <336>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c0>;
- pinctrl-1 = <&pinctrl_i2c0_gpio>;
- sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
- scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- wm8731: wm8731@1a {
- compatible = "wm8731";
- reg = <0x1a>;
- };
-};
Convert I2C binding for Atmel/Microchip SoCs to Device Tree Schema format. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> --- .../bindings/i2c/atmel,at91sam-i2c.yaml | 144 ++++++++++++++++++ .../devicetree/bindings/i2c/i2c-at91.txt | 82 ---------- 2 files changed, 144 insertions(+), 82 deletions(-) create mode 100644 Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-at91.txt