diff mbox series

usb:oxu210hp-hcd: Use platform_get_irq() to get the interrupt

Message ID 20220309053611.2081191-1-chi.minghao@zte.com.cn
State New
Headers show
Series usb:oxu210hp-hcd: Use platform_get_irq() to get the interrupt | expand

Commit Message

Lv Ruyi March 9, 2022, 5:36 a.m. UTC 
From: Minghao Chi <chi.minghao@zte.com.cn>

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
---
 drivers/usb/host/oxu210hp-hcd.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index e82ff2a49672..d45d3f3b0944 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -4223,13 +4223,9 @@  static int oxu_drv_probe(struct platform_device *pdev)
 	/*
 	 * Get the platform resources
 	 */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev,
-			"no IRQ! Check %s setup!\n", dev_name(&pdev->dev));
-		return -ENODEV;
-	}
-	irq = res->start;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 	dev_dbg(&pdev->dev, "IRQ resource %d\n", irq);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);