diff mbox series

[v4,9/9] ARM: dts: r9a06g032: Fill the UART DMA properties

Message ID 20220330132038.808679-10-miquel.raynal@bootlin.com
State Superseded
Headers show
Series [v4,1/9] serial: 8250: dw: Move definitions to the shared header | expand

Commit Message

Miquel Raynal March 30, 2022, 1:20 p.m. UTC 
UART 0 to 2 do not have DMA support, while UART 3 to 7 do.

Fill the "dmas" and "dma-names" properties for each of these nodes.

Please mind that these nodes go through the dmamux node which will
redirect the requests to the right DMA controller. The first 4 cells of
the "dmas" properties will be transferred as-is to the DMA
controllers. The last 2 cells are consumed by the dmamux. Which means
cell 0 and 4 are almost redundant, one giving the controller request ID
and the other the dmamux channel which is a 1:1 translation of the
request IDs, shifted by 16 when pointing to the second DMA controller.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm/boot/dts/r9a06g032.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 804f2d6f416f..aa447e2622e0 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -128,6 +128,9 @@  uart3: serial@50000000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 0 0 0 0 0 1>,
+				<&dmamux 1 0 0 0 1 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -139,6 +142,9 @@  uart4: serial@50001000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 2 0 0 0 2 1>,
+				<&dmamux 3 0 0 0 3 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -150,6 +156,9 @@  uart5: serial@50002000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 4 0 0 0 4 1>,
+				<&dmamux 5 0 0 0 5 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -161,6 +170,9 @@  uart6: serial@50003000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 6 0 0 0 6 1>,
+				<&dmamux 7 0 0 0 7 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -172,6 +184,9 @@  uart7: serial@50004000 {
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 4 0 0 0 20 1>,
+				<&dmamux 5 0 0 0 21 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};