@@ -12,7 +12,7 @@ description:
resides as a subnode of the SMD. As such, the SMD-RPM regulator requires
that the SMD and RPM nodes be present.
- Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
+ Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for
information pertaining to the SMD node.
Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -250,7 +250,7 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain:
The Hexagon node may also have an subnode named either "smd-edge" or
"glink-edge" that describes the communication edge, channels and devices
-related to the Hexagon. See ../soc/qcom/qcom,smd.txt and
+related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and
../soc/qcom/qcom,glink.txt for details on how to describe these.
= EXAMPLE
@@ -111,7 +111,7 @@ and its resource dependencies. It is described by the following properties:
The wcnss node can also have an subnode named "smd-edge" that describes the SMD
edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge.
+See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
= EXAMPLE
The following example describes the resources needed to boot control the WCNSS,
@@ -12,7 +12,7 @@ description: |
to vote for state of the system resources, such as clocks, regulators and bus
frequencies.
- The SMD information for the RPM edge should be filled out. See qcom,smd.txt
+ The SMD information for the RPM edge should be filled out. See qcom,smd.yaml
for the required edge properties. All SMD related properties will reside
within the RPM node itself.
@@ -82,7 +82,7 @@ examples:
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
- rpm_requests {
+ rpm-requests {
compatible = "qcom,rpm-msm8974";
qcom,smd-channels = "rpm_requests";
deleted file mode 100644
@@ -1,98 +0,0 @@
-Qualcomm Shared Memory Driver (SMD) binding
-
-This binding describes the Qualcomm Shared Memory Driver, a fifo based
-communication channel for sending data between the various subsystems in
-Qualcomm platforms.
-
-- compatible:
- Usage: required
- Value type: <stringlist>
- Definition: must be "qcom,smd"
-
-= EDGES
-
-Each subnode of the SMD node represents a remote subsystem or a remote
-processor of some sort - or in SMD language an "edge". The name of the edges
-are not important.
-The edge is described by the following properties:
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the IRQ used by the remote processor to
- signal this processor about communication related updates
-
-- mboxes:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: reference to the associated doorbell in APCS, as described
- in mailbox/mailbox.txt
-
-- qcom,ipc:
- Usage: required, unless mboxes is specified
- Value type: <prop-encoded-array>
- Definition: three entries specifying the outgoing ipc bit used for
- signaling the remote processor:
- - phandle to a syscon node representing the apcs registers
- - u32 representing offset to the register within the syscon
- - u32 representing the ipc bit within the register
-
-- qcom,smd-edge:
- Usage: required
- Value type: <u32>
- Definition: the identifier of the remote processor in the smd channel
- allocation table
-
-- qcom,remote-pid:
- Usage: optional
- Value type: <u32>
- Definition: the identifier for the remote processor as known by the rest
- of the system.
-
-- label:
- Usage: optional
- Value type: <string>
- Definition: name of the edge, used for debugging and identification
- purposes. The node name will be used if this is not
- present.
-
-= SMD DEVICES
-
-In turn, subnodes of the "edges" represent devices tied to SMD channels on that
-"edge". The names of the devices are not important. The properties of these
-nodes are defined by the individual bindings for the SMD devices - but must
-contain the following property:
-
-- qcom,smd-channels:
- Usage: required
- Value type: <stringlist>
- Definition: a list of channels tied to this device, used for matching
- the device to channels
-
-= EXAMPLE
-
-The following example represents a smd node, with one edge representing the
-"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
-"rpm_request" channel.
-
- apcs: syscon@f9011000 {
- compatible = "syscon";
- reg = <0xf9011000 0x1000>;
- };
-
- smd {
- compatible = "qcom,smd";
-
- rpm {
- interrupts = <0 168 1>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
-
- rpm_requests {
- compatible = "qcom,rpm-msm8974";
- qcom,smd-channels = "rpm_requests";
-
- ...
- };
- };
- };
new file mode 100644
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Driver
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ The Qualcomm Shared Memory Driver is a FIFO based communication channel for
+ sending data between the various subsystems in Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,smd
+
+patternProperties:
+ "^.*-edge|rpm$":
+ type: object
+ description:
+ Each subnode of the SMD node represents a remote subsystem or a remote
+ processor of some sort - or in SMD language an "edge". The name of the
+ edges are not important.
+
+ properties:
+ interrupts:
+ maxItems: 1
+
+ label:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Name of the edge, used for debugging and identification purposes. The
+ node name will be used if this is not present.
+
+ mboxes:
+ maxItems: 1
+ description:
+ Reference to the mailbox representing the outgoing doorbell in APCS for
+ this client.
+
+ qcom,ipc:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to a syscon node representing the APCS registers
+ - description: u32 representing offset to the register within the syscon
+ - description: u32 representing the ipc bit within the register
+ description:
+ Three entries specifying the outgoing ipc bit used for signaling the
+ remote processor.
+
+ qcom,smd-edge:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The identifier of the remote processor in the smd channel allocation
+ table.
+
+ qcom,remote-pid:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The identifier for the remote processor as known by the rest of the
+ system.
+
+ # Binding for edge subnodes is not complete
+ patternProperties:
+ "^rpm-requests$":
+ type: object
+ description:
+ In turn, subnodes of the "edges" represent devices tied to SMD
+ channels on that "edge". The names of the devices are not
+ important. The properties of these nodes are defined by the
+ individual bindings for the SMD devices.
+
+ properties:
+ qcom,smd-channels:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ minItems: 1
+ maxItems: 32
+ description:
+ A list of channels tied to this device, used for matching the
+ device to channels.
+
+ required:
+ - compatible
+ - qcom,smd-channels
+
+ additionalProperties: true
+
+ required:
+ - interrupts
+ - qcom,smd-edge
+
+ oneOf:
+ - required:
+ - mboxes
+ - required:
+ - qcom,ipc
+
+ additionalProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ # The following example represents a smd node, with one edge representing the
+ # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+ # "rpm_request" channel.
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ shared-memory {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm-requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ clock-controller {
+ compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ };
+ };
+ };
Convert the Qualcomm Shared Memory Driver bindings to DT Schema. Changes against original bindings: enforce only specific names of child nodes, instead of any names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../regulator/qcom,smd-rpm-regulator.yaml | 2 +- .../bindings/remoteproc/qcom,q6v5.txt | 2 +- .../bindings/remoteproc/qcom,wcnss-pil.txt | 2 +- .../bindings/soc/qcom/qcom,smd-rpm.yaml | 4 +- .../devicetree/bindings/soc/qcom/qcom,smd.txt | 98 ------------- .../bindings/soc/qcom/qcom,smd.yaml | 137 ++++++++++++++++++ 6 files changed, 142 insertions(+), 103 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml