@@ -15,6 +15,7 @@
#define REG_MSSPLL_POSTDIV_CR 0x10u
#define REG_MSSPLL_SSCG_2_CR 0x2Cu
#define REG_CLOCK_CONFIG_CR 0x08u
+#define REG_RTC_CLOCK_CR 0x0Cu
#define REG_SUBBLK_CLOCK_CR 0x84u
#define MSSPLL_FBDIV_SHIFT 0x00u
@@ -95,6 +96,17 @@ static const struct clk_div_table mpfs_div_ahb_table[] = {
{ 0, 0 }
};
+/*
+ * The only two supported reference clock frequencies for the PolarFire SoC are
+ * 100 and 125 MHz, as the rtc reference is required to be 1 MHz.
+ * It therefore only needs to have divider table entries corresponding to
+ * divide by 100 and 125.
+ */
+static const struct clk_div_table mpfs_div_rtcref_table[] = {
+ { 100, 100 }, { 125, 125 },
+ { 0, 0 }
+};
+
static unsigned long mpfs_clk_msspll_recalc_rate(struct clk_hw *hw, unsigned long prate)
{
struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
@@ -233,6 +245,16 @@ static struct mpfs_cfg_hw_clock mpfs_cfg_clks[] = {
REG_CLOCK_CONFIG_CR),
CLK_CFG(CLK_AHB, "clk_ahb", "clk_msspll", 4, 2, mpfs_div_ahb_table, 0,
REG_CLOCK_CONFIG_CR),
+ {
+ .cfg.id = CLK_RTCREF,
+ .cfg.shift = 0,
+ .cfg.width = 12,
+ .cfg.table = mpfs_div_rtcref_table,
+ .cfg.reg_offset = REG_RTC_CLOCK_CR,
+ .cfg.flags = CLK_DIVIDER_ONE_BASED,
+ .hw.init =
+ CLK_HW_INIT_PARENTS_DATA("clk_rtcref", mpfs_ext_ref, &mpfs_clk_cfg_ops, 0),
+ }
};
static int mpfs_clk_register_cfg(struct device *dev, struct mpfs_cfg_hw_clock *cfg_hw,
@@ -351,7 +373,7 @@ static struct mpfs_periph_hw_clock mpfs_periph_clks[] = {
CLK_PERIPH(CLK_MAC0, "clk_periph_mac0", PARENT_CLK(AHB), 1, 0),
CLK_PERIPH(CLK_MAC1, "clk_periph_mac1", PARENT_CLK(AHB), 2, 0),
CLK_PERIPH(CLK_MMC, "clk_periph_mmc", PARENT_CLK(AHB), 3, 0),
- CLK_PERIPH(CLK_TIMER, "clk_periph_timer", PARENT_CLK(AHB), 4, 0),
+ CLK_PERIPH(CLK_TIMER, "clk_periph_timer", PARENT_CLK(RTCREF), 4, 0),
CLK_PERIPH(CLK_MMUART0, "clk_periph_mmuart0", PARENT_CLK(AHB), 5, CLK_IS_CRITICAL),
CLK_PERIPH(CLK_MMUART1, "clk_periph_mmuart1", PARENT_CLK(AHB), 6, 0),
CLK_PERIPH(CLK_MMUART2, "clk_periph_mmuart2", PARENT_CLK(AHB), 7, 0),