diff mbox series

[13/26] lpfc: Move MI module parameter check to handle dynamic disable

Message ID 20220412222008.126521-14-jsmart2021@gmail.com
State New
Headers show
Series lpfc: Update lpfc to revision 14.2.0.2 | expand

Commit Message

James Smart April 12, 2022, 10:19 p.m. UTC 
lpfc_refresh_params can be called for an async event handler.

This could potentially override the value initialized by lpfc_cmf_setup

Move module parameter check to lpfc_refresh_params.

Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_init.c | 8 +++++++-
 drivers/scsi/lpfc/lpfc_sli.c  | 4 ----
 2 files changed, 7 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 7dfd47dcaad9..ec6da7e27e4b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -686,8 +686,14 @@  lpfc_sli4_refresh_params(struct lpfc_hba *phba)
 		return rc;
 	}
 	mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
-	phba->sli4_hba.pc_sli4_params.mi_ver =
+
+	/* Are we forcing MI off via module parameter? */
+	if (phba->cfg_enable_mi)
+		phba->sli4_hba.pc_sli4_params.mi_ver =
 			bf_get(cfg_mi_ver, mbx_sli4_parameters);
+	else
+		phba->sli4_hba.pc_sli4_params.mi_ver = 0;
+
 	phba->sli4_hba.pc_sli4_params.cmf =
 			bf_get(cfg_cmf, mbx_sli4_parameters);
 	phba->sli4_hba.pc_sli4_params.pls =
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index ca7766940b4e..3b9359c1ee1c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7994,10 +7994,6 @@  lpfc_cmf_setup(struct lpfc_hba *phba)
 
 	sli4_params = &phba->sli4_hba.pc_sli4_params;
 
-	/* Are we forcing MI off via module parameter? */
-	if (!phba->cfg_enable_mi)
-		sli4_params->mi_ver = 0;
-
 	/* Always try to enable MI feature if we can */
 	if (sli4_params->mi_ver) {
 		lpfc_set_features(phba, mboxq, LPFC_SET_ENABLE_MI);