@@ -5,6 +5,7 @@
* JZ4740 SoC RTC driver
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
@@ -41,6 +42,9 @@
#define JZ_RTC_CTRL_AE BIT(2)
#define JZ_RTC_CTRL_ENABLE BIT(0)
+#define JZ_RTC_REGULATOR_NC1HZ_MASK GENMASK(15, 0)
+#define JZ_RTC_REGULATOR_ADJC_MASK GENMASK(25, 16)
+
/* Magic value to enable writes on jz4780 */
#define JZ_RTC_WENR_MAGIC 0xA55A
@@ -64,6 +68,7 @@ struct jz4740_rtc {
enum jz4740_rtc_type type;
struct rtc_device *rtc;
+ struct clk *clk;
struct clk_hw clk32k;
@@ -222,12 +227,51 @@ static int jz4740_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
return jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_AF_IRQ, enable);
}
+static int jz4740_rtc_read_offset(struct device *dev, long *offset)
+{
+ struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+ long rate = clk_get_rate(rtc->clk);
+ s32 nc1hz, adjc, offset1k;
+ u32 reg;
+
+ reg = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_REGULATOR);
+ nc1hz = FIELD_GET(JZ_RTC_REGULATOR_NC1HZ_MASK, reg);
+ adjc = FIELD_GET(JZ_RTC_REGULATOR_ADJC_MASK, reg);
+
+ offset1k = (nc1hz - rate + 1) * 1024L + adjc;
+ *offset = offset1k * 1000000L / (rate * 1024L);
+
+ return 0;
+}
+
+static int jz4740_rtc_set_offset(struct device *dev, long offset)
+{
+ struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+ long rate = clk_get_rate(rtc->clk);
+ s32 offset1k, adjc, nc1hz;
+
+ offset1k = div_s64_rem(offset * rate * 1024LL, 1000000LL, &adjc);
+ nc1hz = rate - 1 + offset1k / 1024L;
+
+ if (adjc < 0) {
+ nc1hz--;
+ adjc += 1024;
+ }
+
+ nc1hz = FIELD_PREP(JZ_RTC_REGULATOR_NC1HZ_MASK, nc1hz);
+ adjc = FIELD_PREP(JZ_RTC_REGULATOR_ADJC_MASK, adjc);
+
+ return jz4740_rtc_reg_write(rtc, JZ_REG_RTC_REGULATOR, nc1hz | adjc);
+}
+
static const struct rtc_class_ops jz4740_rtc_ops = {
.read_time = jz4740_rtc_read_time,
.set_time = jz4740_rtc_set_time,
.read_alarm = jz4740_rtc_read_alarm,
.set_alarm = jz4740_rtc_set_alarm,
.alarm_irq_enable = jz4740_rtc_alarm_irq_enable,
+ .read_offset = jz4740_rtc_read_offset,
+ .set_offset = jz4740_rtc_set_offset,
};
static irqreturn_t jz4740_rtc_irq(int irq, void *data)
@@ -378,6 +422,7 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
spin_lock_init(&rtc->lock);
+ rtc->clk = clk;
platform_set_drvdata(pdev, rtc);
device_init_wakeup(dev, 1);
Write the NC1HZ and ADJC register fields, which allow to tweak the frequency of the RTC clock, so that it can run as accurately as possible. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/rtc/rtc-jz4740.c | 45 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)