diff mbox series

i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging

Message ID 20220427101910.47438-1-mika.westerberg@linux.intel.com
State Accepted
Commit 17a0f3acdc6ec8b89ad40f6e22165a4beee25663
Headers show
Series i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging | expand

Commit Message

Mika Westerberg April 27, 2022, 10:19 a.m. UTC
Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:

  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
        [fault reason 05] PTE Write access is not set

To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/i2c/busses/i2c-ismt.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Wolfram Sang May 21, 2022, 10:53 a.m. UTC | #1
On Wed, Apr 27, 2022 at 01:19:10PM +0300, Mika Westerberg wrote:
> Before sending a MSI the hardware writes information pertinent to the
> interrupt cause to a memory location pointed by SMTICL register. This
> memory holds three double words where the least significant bit tells
> whether the interrupt cause of master/target/error is valid. The driver
> does not use this but we need to set it up because otherwise it will
> perform DMA write to the default address (0) and this will cause an
> IOMMU fault such as below:
> 
>   DMAR: DRHD: handling fault status reg 2
>   DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
>         [fault reason 05] PTE Write access is not set
> 
> To prevent this from happening, provide a proper DMA buffer for this
> that then gets mapped by the IOMMU accordingly.
> 
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

No maintainer response so far, but given this looks like an important
bugfix and you guys are all from Intel as well, I'll apply it this time.

Applied to for-current, thanks!
Andy Shevchenko May 22, 2022, 9:37 a.m. UTC | #2
On Sat, May 21, 2022 at 12:53:57PM +0200, Wolfram Sang wrote:
> On Wed, Apr 27, 2022 at 01:19:10PM +0300, Mika Westerberg wrote:
> > Before sending a MSI the hardware writes information pertinent to the
> > interrupt cause to a memory location pointed by SMTICL register. This
> > memory holds three double words where the least significant bit tells
> > whether the interrupt cause of master/target/error is valid. The driver
> > does not use this but we need to set it up because otherwise it will
> > perform DMA write to the default address (0) and this will cause an
> > IOMMU fault such as below:
> > 
> >   DMAR: DRHD: handling fault status reg 2
> >   DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
> >         [fault reason 05] PTE Write access is not set
> > 
> > To prevent this from happening, provide a proper DMA buffer for this
> > that then gets mapped by the IOMMU accordingly.
> > 
> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> 
> No maintainer response so far, but given this looks like an important
> bugfix and you guys are all from Intel as well, I'll apply it this time.

It's indeed.

> Applied to for-current, thanks!

Thanks, Wolfram!
Mika Westerberg May 23, 2022, 8:51 a.m. UTC | #3
On Sat, May 21, 2022 at 12:53:57PM +0200, Wolfram Sang wrote:
> On Wed, Apr 27, 2022 at 01:19:10PM +0300, Mika Westerberg wrote:
> > Before sending a MSI the hardware writes information pertinent to the
> > interrupt cause to a memory location pointed by SMTICL register. This
> > memory holds three double words where the least significant bit tells
> > whether the interrupt cause of master/target/error is valid. The driver
> > does not use this but we need to set it up because otherwise it will
> > perform DMA write to the default address (0) and this will cause an
> > IOMMU fault such as below:
> > 
> >   DMAR: DRHD: handling fault status reg 2
> >   DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
> >         [fault reason 05] PTE Write access is not set
> > 
> > To prevent this from happening, provide a proper DMA buffer for this
> > that then gets mapped by the IOMMU accordingly.
> > 
> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> 
> No maintainer response so far, but given this looks like an important
> bugfix and you guys are all from Intel as well, I'll apply it this time.
> 
> Applied to for-current, thanks!

Thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index c0364314877e..c16157ee8c52 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -82,6 +82,7 @@ 
 
 #define ISMT_DESC_ENTRIES	2	/* number of descriptor entries */
 #define ISMT_MAX_RETRIES	3	/* number of SMBus retries to attempt */
+#define ISMT_LOG_ENTRIES	3	/* number of interrupt cause log entries */
 
 /* Hardware Descriptor Constants - Control Field */
 #define ISMT_DESC_CWRL	0x01	/* Command/Write Length */
@@ -175,6 +176,8 @@  struct ismt_priv {
 	u8 head;				/* ring buffer head pointer */
 	struct completion cmp;			/* interrupt completion */
 	u8 buffer[I2C_SMBUS_BLOCK_MAX + 16];	/* temp R/W data buffer */
+	dma_addr_t log_dma;
+	u32 *log;
 };
 
 static const struct pci_device_id ismt_ids[] = {
@@ -411,6 +414,9 @@  static int ismt_access(struct i2c_adapter *adap, u16 addr,
 	memset(desc, 0, sizeof(struct ismt_desc));
 	desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
 
+	/* Always clear the log entries */
+	memset(priv->log, 0, ISMT_LOG_ENTRIES * sizeof(u32));
+
 	/* Initialize common control bits */
 	if (likely(pci_dev_msi_enabled(priv->pci_dev)))
 		desc->control = ISMT_DESC_INT | ISMT_DESC_FAIR;
@@ -708,6 +714,8 @@  static void ismt_hw_init(struct ismt_priv *priv)
 	/* initialize the Master Descriptor Base Address (MDBA) */
 	writeq(priv->io_rng_dma, priv->smba + ISMT_MSTR_MDBA);
 
+	writeq(priv->log_dma, priv->smba + ISMT_GR_SMTICL);
+
 	/* initialize the Master Control Register (MCTRL) */
 	writel(ISMT_MCTRL_MEIE, priv->smba + ISMT_MSTR_MCTRL);
 
@@ -795,6 +803,12 @@  static int ismt_dev_init(struct ismt_priv *priv)
 	priv->head = 0;
 	init_completion(&priv->cmp);
 
+	priv->log = dmam_alloc_coherent(&priv->pci_dev->dev,
+					ISMT_LOG_ENTRIES * sizeof(u32),
+					&priv->log_dma, GFP_KERNEL);
+	if (!priv->log)
+		return -ENOMEM;
+
 	return 0;
 }