diff mbox series

[5.17,106/146] powerpc/time: Always set decrementer in timer_interrupt()

Message ID 20220426081753.037463942@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH April 26, 2022, 8:21 a.m. UTC
From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit d2b9be1f4af5cabed1ee5bb341f887f64b1c1669 ]

This is a partial revert of commit 0faf20a1ad16 ("powerpc/64s/interrupt:
Don't enable MSR[EE] in irq handlers unless perf is in use").

Prior to that commit, we always set the decrementer in
timer_interrupt(), to clear the timer interrupt. Otherwise we could end
up continuously taking timer interrupts.

When high res timers are enabled there is no problem seen with leaving
the decrementer untouched in timer_interrupt(), because it will be
programmed via hrtimer_interrupt() -> tick_program_event() ->
clockevents_program_event() -> decrementer_set_next_event().

However with CONFIG_HIGH_RES_TIMERS=n or booting with highres=off, we
see a stall/lockup, because tick_nohz_handler() does not cause a
reprogram of the decrementer, leading to endless timer interrupts.
Example trace:

  [    1.898617][    T7] Freeing initrd memory: 2624K^M
  [   22.680919][    C1] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:^M
  [   22.682281][    C1] rcu:     0-....: (25 ticks this GP) idle=073/0/0x1 softirq=10/16 fqs=1050 ^M
  [   22.682851][    C1]  (detected by 1, t=2102 jiffies, g=-1179, q=476)^M
  [   22.683649][    C1] Sending NMI from CPU 1 to CPUs 0:^M
  [   22.685252][    C0] NMI backtrace for cpu 0^M
  [   22.685649][    C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc2-00185-g0faf20a1ad16 #145^M
  [   22.686393][    C0] NIP:  c000000000016d64 LR: c000000000f6cca4 CTR: c00000000019c6e0^M
  [   22.686774][    C0] REGS: c000000002833590 TRAP: 0500   Not tainted  (5.16.0-rc2-00185-g0faf20a1ad16)^M
  [   22.687222][    C0] MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24000222  XER: 00000000^M
  [   22.688297][    C0] CFAR: c00000000000c854 IRQMASK: 0 ^M
  ...
  [   22.692637][    C0] NIP [c000000000016d64] arch_local_irq_restore+0x174/0x250^M
  [   22.694443][    C0] LR [c000000000f6cca4] __do_softirq+0xe4/0x3dc^M
  [   22.695762][    C0] Call Trace:^M
  [   22.696050][    C0] [c000000002833830] [c000000000f6cc80] __do_softirq+0xc0/0x3dc (unreliable)^M
  [   22.697377][    C0] [c000000002833920] [c000000000151508] __irq_exit_rcu+0xd8/0x130^M
  [   22.698739][    C0] [c000000002833950] [c000000000151730] irq_exit+0x20/0x40^M
  [   22.699938][    C0] [c000000002833970] [c000000000027f40] timer_interrupt+0x270/0x460^M
  [   22.701119][    C0] [c0000000028339d0] [c0000000000099a8] decrementer_common_virt+0x208/0x210^M

Possibly this should be fixed in the lowres timing code, but that would
be a generic change and could take some time and may not backport
easily, so for now make the programming of the decrementer unconditional
again in timer_interrupt() to avoid the stall/lockup.

Fixes: 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20220420141657.771442-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/time.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 384f58a3f373..5f8933aec75c 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -610,23 +610,22 @@  DEFINE_INTERRUPT_HANDLER_ASYNC(timer_interrupt)
 		return;
 	}
 
-	/* Conditionally hard-enable interrupts. */
-	if (should_hard_irq_enable()) {
-		/*
-		 * Ensure a positive value is written to the decrementer, or
-		 * else some CPUs will continue to take decrementer exceptions.
-		 * When the PPC_WATCHDOG (decrementer based) is configured,
-		 * keep this at most 31 bits, which is about 4 seconds on most
-		 * systems, which gives the watchdog a chance of catching timer
-		 * interrupt hard lockups.
-		 */
-		if (IS_ENABLED(CONFIG_PPC_WATCHDOG))
-			set_dec(0x7fffffff);
-		else
-			set_dec(decrementer_max);
+	/*
+	 * Ensure a positive value is written to the decrementer, or
+	 * else some CPUs will continue to take decrementer exceptions.
+	 * When the PPC_WATCHDOG (decrementer based) is configured,
+	 * keep this at most 31 bits, which is about 4 seconds on most
+	 * systems, which gives the watchdog a chance of catching timer
+	 * interrupt hard lockups.
+	 */
+	if (IS_ENABLED(CONFIG_PPC_WATCHDOG))
+		set_dec(0x7fffffff);
+	else
+		set_dec(decrementer_max);
 
+	/* Conditionally hard-enable interrupts. */
+	if (should_hard_irq_enable())
 		do_hard_irq_enable();
-	}
 
 #if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)